Page 1
Test report no. 16010615 Page 1 of 2
EUT: Hybrid Desktopreader
FCC ID:
QLXDESKTOPREADER
FCC Title 47 CFR Part 15
Date of issue: 2016-11-21
Date: 2016-08-19
Created: P9 Controlled: P4 Released: P1
Vers. no. 2.16
m. dudde hochfrequenz-technik
Rottland 5a
D-51429 Bergisch Gladbach/ Germany
Tel: +49 2207-96890
Fax +49 2207-968920
Annex acc. to FCC Title 47 CFR Part 15
relating to
TeraTron GmbH
Hybrid Desktopreader
Annex no. 5
User Manual
Functional Description
Title 47 - Telecommunication
Part 15 - Radio Frequency Devices
Subpart C – Intentional Radiators
ANSI C63.4-2014
ANSI C63.10-2013
Page 2
Hybrid Desktopreader User Manual
Document no. Hybrid Desktopreader User Manual
Project Hybrid Desktopreader
Document for FCC and IC Creation date: 06.01.2017
Functional Description of the Hybrid Desktopreader Module
The Hybrid Desktopreader Module offers a general RFID reader functionality for 125kHz
(LF) and 13,56MHz (HF) RFID Transponders. The Hybrid Desktopreader Module is
powered by a 5V DC voltage source that is provided by an external interface module that
is used in combination with it. The Hybrid Desktopreader RFID functionality includes
reading of several types of 125kHz (e.g. HITAG) or 13,56MHz ISO transponder (e.g.
ISO15693, ISO14443) types.
The µProcessor of the Hybrid Desktopreader is clocked by a 8MHz-Resonator. All active
components are powered by an external 5V 250mA power supply. The 125kHz-Reader IC
(P4097) drives the 125kHz coil antenna. The 13,56MHz Reader IC (CLRC663) drives a
13,56MHz coil antenna respectively.
When reading an RFID transponder ID, the data is sent via UART to another interface
module that is able to identify the transponder RFID data and manage the transponder ID.
This data can be used for further processing, e.g. authorisation of functionalities.
Revision
1.0
Generate Approved Confidentiality Page Document
MSC RHE
Strictly
confidential
1 of 3 MLx LF/HF Handle User Manual
Page 3
Hybrid Desktopreader User Manual
Document no. Hybrid Desktopreader User Manual
Project Hybrid Desktopreader
Document for FCC and IC Creation date: 06.01.2017
Functional Block Diagram
Key with implemented RFID technology
Hybrid
Desktopreader
Module
Interface Module
The Hybrid Desktopreader offers 125kHz and 13,56MHz RFID functionality using two
different antennas for each RFID frequency.
Revision
1.0
Generate Approved Confidentiality Page Document
MSC RHE
Strictly
confidential
2 of 3 MLx LF/HF Handle User Manual
Page 4
Hybrid Desktopreader User Manual
Document no. Hybrid Desktopreader User Manual
Project Hybrid Desktopreader
Document for FCC and IC Creation date: 06.01.2017
Compliance Statements
Compliance Statements FCC
The title “CAUTION TO USERS” or “FCC/IC WARNING NOTE” or relevant title and “Changes or
modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.”
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Compliance Statements IC
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Revision
1.0
Generate Approved Confidentiality Page Document
MSC RHE
Strictly
confidential
3 of 3 MLx LF/HF Handle User Manual
Loading...