Tenvis PT7131, PT7131W User Manual

Pan Tilt

WiFi Pan Tilt Camera

PT7131/PT7131W

BEFORE YOU BEGIN

Please unpack the box carefully and identify that all the parts are present.

The Camera is suitable for indoor use.

Check the voltage of the power supply. Make sure you use the recommended power
input (5.0V DC, 1.5A). Use of incorrect voltage is not covered by the warranty.

Do not attempt to open the casing to access the Camera. Damage caused to the
product by tampering with the casing is not covered by the warranty.

Do not aim the camera at the sun or similar intense light.

The interval time of powering the camera on and off must be more than 10 seconds
otherwise it will cause serious damage to the CPU.

When you update the cameras, please ensure you:

- connect the camera directly to a computer using a network cable

- close other programs and windows on the computer

- keep the power connected when updating the firmware

PT7131 v1.0

PRODUCT DESCRIPTION

WiFi Pan Tilt Camera can be set up in minutes for instant monitoring and live viewing on your

Mac or Windows computer and 3G Smartphone - all via your wireless network router or switch

For optional recording, simply install the recording software to your Windows PC and configure it

to your particular requirements.

FEATURES

Camera combines a high quality digital
charge-coupled device (COMS) with a
powerful wireless web server for clear
images from anywhere on your local
network or over the internet.

Can be used on WiFi or Wired Networks.

Dual resolution, 640x480 or 320x240
pixel resolution.

Expand the system at any time by adding
up to 35 additional cameras.

View cameras in Split Screen view or
watch the camera detecting movement
full screen.

Cameras can be viewed via standard
PC or Mac browsers including Internet
Explorer, Safari, Chrome and Firefox.

IR LEDs for up to 12m Night Vision.

NOTES ON WINDOWS AND MAC COMPATIBILITY:

- IP camera setup should be completed on a Windows PC only using Internet Explorer.

- Live viewing, taking snapshots, recording and camera configuration are fully supported on Windows
PCs.

Cameras can be mounted indoors.

Includes Multi-level user management
which can be configured with secure
password access.

Easy to use web browser controls. Also
allows quick configuration changes via
the Settings menu.

View live images on your 3G Smartphone.

Supports image snapshots and image
sending via Email and FTP upload.

Supplied with free 36 Camera Windows
Recording and Viewing software.

Mac users are only able to:

- view live images via compatible web browsers including Safari, Firefox and Chrome but are
limited to viewing one camera at a time.

- take and save snapshot images via the web browser interface.