Ten Tronics TTBT001 User Manual

Wall Plate Stereo Audio Power Amplifier Built-in Bluetooth
R e c e i v e r Manual

SPECIFICATIONS

 Audio Inputs :Bluetooth Receiver or stereo audio line level
 Bluetooth Version: 3.0 EDR compliant
 Bluetooth Receive Distance:10 Meters
 Power Amplifier Type:Stereo Class-D
 Output power:15W(rms) per channel (@ RL=4 ohm)
 THD+N :0.06 % (@ RL=8 ohm, f = 1 kHz)
 Minimum Load Resistance :4 ohm
 Includes Speaker Protection circuit.
 Power Source:12 VDC/2A

Bluetooth Blue LED Status:

․Power on:0.1s on/off flash 3 times
․Pairing ok:0.5s on/off till link ok
․Link ok:0.05s on/ 0.2s off flash 2 times each 5s
․Standby:0.05s on/ 0.2s off flash 1 times each 5s
․Play music:0.1s on/ 0.1s off flash 1 times each 5s
․Link back:0.05s on/ 0.15s off flash 1 times each 5s

CONNECTIONS

1. Insert the left speaker’s + and – wires into the unit’s SPEAKER L+(left positive)
and L-(left negative)
terminals, then tighten the screws.

2. Insert the right speaker’s + and – wires into the unit’s SPEAKER R+(right
positive) and R-(right negative)
terminals, then tighten the screws.

3. Plug audio source cable with 3.5mm stereo plug in the unit’s AUX IN jack.

4. Plug power adaptor in the unit’s DC power socket with cord.

OPERATION

1. Select audio source between BT and AUX.

2. If switch to BT you must turn on the smart phone and enable the function of
Bluetooth to work.