Tennsco SC2436 User Manual

ASSEMBLY INSTRUCTIONS & PARTS MANUAL #2200709

SERVICE CART
Model Nos. SC1630 and SC2436

Tennsco Corp., Dickson, TN 37056-1888 • [phone]

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE!

LIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder.
This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by
persons not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified or removed.
UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE HEREBY EXCLUDED:

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS

AT SELLER’S OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR

OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place
of business or require Buyer to return the goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne
by Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.

TENNSCO Corp., P.O. BOX 1888, DICKSON, TN 37056-1888

[phone] or [phone] (toll free)

Website: www.tennsco.com E-mail: [e-mail]

ASSEMBLY INSTRUCTIONS FOR SERVICE CART

Tools required one flat tip screwdriver and one 7/16" wrench

1. Bolt lower tray
(Ref. No. 2) to
four post (Ref.
No. 3) with sixteen
1/4-20 bolts and
nuts.

2. Bolt upper tray (Ref. No. 1) to post
with twelve bolts and nuts, do not
attach tray to post where the handle
brackets (Ref. No. 7) mount until
later.

3. Place caster support (Ref. No. 4)
between lower tray and caster top
plates and secure with 1/4-20
bolts and nuts. Caster position
optional.

5. Slide tubular handle
(Ref. No. 8) over the
embossed section of
the bracket. While still
holding the handle,
place the second
handle bracket into
position and bolt to the
post as you did in
step 4.

4. Attach the right handle
bracket (Ref. No.7) to
outside of post using two
nuts and bolts.

6. After checking the entire
cart assembly for
squareness, tighten all
bolts and nuts.

7. Your service cart is now assembled and ready for use.

NOTE: Pulling the cart can cause serious injury; when moving the cart, always
push the cart in front of you using the provided handle.

REPLACEMENT PARTS

1

3

7

4

8

2

5

6

REF. NO. DESCRIPTION PART NO. QUANITY

1 Upper Tray ST-ww* 1
2 Lower Tray SCLT-ww* 1

3 Upright Post UP-1 4
4 Caster Support CBS-ww* 2
5 Rigid Caster SCCK-1 2
6 Swivel Caster HARDW30 2
7 Handle Bracket HB-1 2
8 Handle RH-ww 1
9 Service Cart Hardware Pack SCHP-1 1

* "ww" indicates unit width

We make every effort to ensure that all units ship complete and arrive undamaged. However, should your unit
contain missing or damaged parts, replacements may be obtained directly from us. To obtain proper
replacement parts, follow the instructions below, or fill out the form at www.tennsco.com/partsorder.html.

TO OBTAIN PROPER REPLACEMENT PARTS, PLEASE PROVIDE THE FOLLOWING INFORMATION:

l

Model Number Purchase Date

l

Description of part(s) needed and part Your company name
number(s) as shown in Parts List (above) Contact person's name

l

Color (i.e. Medium Grey, Sand, etc.) Company the product was purchased from

l

Was item missing, or was it damaged?

Tennsco Corp., P.O. Box 1888, Dickson, TN 37056-1888 E-mail address: [e-mail]

Customer Service: [phone] Fax: [phone]

If requesting parts by telephone, ask for customer service and have as much of the above information ready as possible.

l

l

l

l