Tennsco J1878SU User Manual

CABINET INSTRUCTIONS & PARTS MANUAL #2510408

JUMBO STORAGE CABINET

Preassembled Model J1878SU

Tennsco Corp., Dickson, TN 37056-1888 • [phone]

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE!

Congratulations on your purchase of a
Tennsco Storage Cabinet! The Model
J1878SU Jumbo Cabinet is 48"w x 18"d
x 78" tall, providing abundant secured
storage space for office supplies, books,
records, small parts, tools, etc.

These cabinets offer five openings with
four adjustable shelves, two brushed
chrome handles (one locking with two
keys), and a three-point locking system
for extra security. Nylon lock-bar guides
ensure smooth, quiet operation.

Tennsco's cabinets are constructed from
top quality steel. Welded box formed
steel shelves offer exceptional strength
with weight capacities of up to 400 lbs.
per shelf, evenly distributed (bottom shelf
capacity is 200 lbs., evenly distributed).
Our attractive and durable powder-coated
paint finish will provide for years of
service.

GENERAL SAFETY INFORMATION: Some parts may have sharp edges. CARE must be taken when
handling various pieces to avoid injury. For safety, wear a pair of work gloves when assembling or
performing any maintenance on your cabinet.

LIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder.
This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by
persons not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified or removed.
UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE HEREBY EXCLUDED:

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS

AT SELLER’S OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR

OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place
of business or require Buyer to return the goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne
by Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.

TENNSCO Corp., P.O. BOX 1888, DICKSON, TN 37056-1888

[phone] or [phone] (toll free)

Website: www.tennsco.com E-mail: [e-mail]

PK-2510408

Shelf Adjustment

Leveling the Cabinet

1. Using a flat-head screw­driver, gently pull the lock­ing tab away from the hole
in the shelf edge. This will
allow the shelf to be re­leased and lifted from the
tab.

2. Place the shelf at the
desired level.

3. Insert the shelf edges into
the tabs at the new location.
Be sure that the shelf is
securely fitted into the tabs
at all points of contact.

1. If cabinet doors don't open
and close easily, unit likely
needs leveling.

2. Open the cabinet doors and
locate the leveling hole on
each side of the cabinet
base.

3. Insert a flathead screwdriver
into each leveling hole, and
turn the screw until leveler
is at the desired position.

4. If leveled properly, doors
should open and close
freely.

Insert screwdriver

through hole (above) to

adjust leveler (below).

View from beneath

View from underside

of cabinet

REPLACEMENT PARTS

For Storage Cabinet For Locking Handle

PART DESCRIPTION

Shelf 306
Door (left) 056LD
Door (right) 056RD
Hinge Pin 944HP

*Included in Locking Handle w/keys and hardware (part no. 043LH). May be ordered alone or as part of the full hardware set.

Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged. However, should
your unit contain missing or damaged parts, replacements may be obtained directly from us. To obtain proper replacement
parts follow the instructions below, or fill out the form at www.tennsco.com/partsorder.html.

TO OBTAIN PROPER REPLACEMENT PARTS, PLEASE PROVIDE THE FOLLOWING INFORMATION:

●●

●

●●

Model Number (J1878SU) Purchase Date

●●

●

●●

Description of part(s) needed and part Your company name
number(s) as shown in Parts List (above) Contact person's name

●●

●

●●

Color (i.e. Medium Grey, etc.) Who the product was purchased from

●●

●

●●

Was item missing, or was it damaged?

PART NO.

PART DESCRIPTION PART NO.

Lock Bar Set 043LB
Locking Handle w/keys and hardware 043LH
Dummy Handle 043DH
Locking Cam* 944LC
Cam Retainer* 944CR
Lock Bar Guide Insert* 944GI

●●

●

●●

●●

●

●●

●●

●

●●

●●

●

●●

Tennsco Corp., P.O. Box 1888, Dickson, TN 37056-1888 Customer Service: [phone] Fax: [phone]

If requesting parts by telephone, ask for customer service and have as much of the above information ready as possible.