Tennsco CK4824 User Manual

CABINET INSTRUCTIONS & PARTS MANUAL #2370807

CASTER KIT FOR STORAGE CABINETS

Model Nos. CK18, CK24, CK-4818, and CK-4824

Tennsco Corp., Dickson, TN 37056-1888 • [phone]

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE!

Congratulations on your purchase of a
Tennsco Caster Kit! Tennsco's caster
kits come standard with four swivel
casters, including two with locking
wheels to stabilize the unit.
Tennsco offers caster kits in four sizes,
to fit our full line of Storage Cabinets
and Jumbo Storage Cabinets. And our

GENERAL SAFETY INFORMATION: Some parts may have sharp edges. CARE must be taken when handling various
pieces to avoid injury. For safety, wear a pair of work gloves when assembling or performing any maintenance on your
caster kit or storage cabinet.

LIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder.
This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by
persons not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified or removed.
UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE HEREBY EXCLUDED:

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS

AT SELLER’S OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR

OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place
of business or require Buyer to return the goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne
by Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.

durable and attractive powder-coated
paint finish will provide years of
service.

Sizes available

CK18 ...............fits 36"w x 18"d cabinets

CK24 ...............fits 36"w x 24"d cabinets

CK-4818 ..........fits 48"w x 18"d cabinets

CK-4824 ..........fits 48"w x 24"d cabinets

TENNSCO Corp.

P.O. BOX 1888

DICKSON, TN 37056-1888

[phone] or [phone] (toll free)

Website: www.tennsco.com E-mail: [e-mail]

PK-2370807

Step By Step Installation Instructions

Tools required: a 9/16" wrench or nut driver and two 1/2" wrenches or nutdrivers. Two people
recommended when setting storage cabinet upright after casters are attached. Assembly Time: ten to
fifteen minutes.

1. Before beginning assembly, compare the
parts you have received against the parts list
on the front of this sheet to ensure that you
have all the necessary pieces.

2. As you prepare to attach the casters, take
some time to consider where you want to
place the two swivel casters with brakes. If
the cabinet will be placed against the wall, we
recommend placing the braking casters
along the front of the base.

3. Attach two swivel casters (Ref. No. 2) and two

braking swivel casters (Ref. No. 3) to the caster
frame (Ref. No. 1), using the nuts and washers
provided (Ref. Nos. 6 and 7). Use a 9/16"
wrench to tighten the casters securely.

NOTE: All casters must be tight for unit to
work properly.

3

/8" Hex Nuts &
Lockwashers

4. After making sure that the cabinet is un­loaded, lay the cabinet on the floor with the
door facing up.

NOTE: It is
recommended that
the bottom of the cabinet is a minimum of 1/2"
off the floor, in order to more easily attach
the caster kit to the unit.

5. Position the caster kit frame on the bottom
of the cabinet. The back of the caster kit has
a "hem" that will fit over the flange at the
bottom rear of the cabinet

(see circled drawing

below).

Hem on

Caster Frame

Back Panel Flange

on Cabinet