Tennsco 7114 User Manual

CABINET INSTRUCTIONS & PARTS MANUAL #2470308

ST ANDARD W ARDROBE CABINET, 72"h

Preassembled Model 7114

Tennsco Corp., Dickson, TN 37056-1888 • [phone]

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE!

Congratulations on your purchase of a
Tennsco Wardrobe Cabinet! Tennsco's
7114 units are general purpose
storage cabinets that provide a level
of quality you won't find elsewhere.
They provide secure storage for
clothing and other hanging materials,
as well as hats, tools, duffel bags, etc.

These cabinets offer one adjustable
shelf, a coat-rod, a locking chrome
handle with two keys, and a three­point locking system for extra security.

Tennsco's cabinets are constructed
from top quality 24 gauge steel, with
20 gauge steel shelves, offering
weight capacities of up to 200 lbs. per
shelf (evenly distributed). Our
attractive and durable powder-coated
paint finish will provide for years of
service.

GENERAL SAFETY INFORMATION: Some parts may have sharp edges. CARE must be taken when
handling various pieces to avoid injury. For safety, wear a pair of work gloves when assembling or
performing any maintenance on your cabinet.

LIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder.
This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by
persons not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified or removed.
UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE HEREBY EXCLUDED:

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS

AT SELLER’S OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR

OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place
of business or require Buyer to return the goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne
by Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.

TENNSCO Corp., P.O. BOX 1888, DICKSON, TN 37056-1888

[phone] or [phone] (toll free)

Website: www.tennsco.com E-mail: [e-mail]

PK-2470308

Shelf Adjustment

1. Using a flat-head screwdriver,
gently pull the locking tab away
from the hole in the shelf edge.
This will allow the shelf to be
released and lifted from the tab.

2. Place the shelf at the desired
level.

3. Insert the shelf edges into the
tabs at the new location. Be sure
that the shelf is securely fitted
into the tabs at all points of
contact.

Leveling the Cabinet

If cabinet doors don't easily open and close,
your unit likely needs leveling. Leveling can
be accomplished by placing small shims
underneath the corners of the unit until the

View from beneath

doors align along the top.

shelf

REPLACEMENT PARTS

For Storage Cabinet For Locking Handle

PART DESCRIPTION

Shelf 301
Door (left) 944LD
Door (right) 944RD
Hinge pin 944HP
Coat Rod 045CR
Coat Rod Bracket 045RB

*Included in Locking Handle w/keys and hardware (part no. 944LH). May be ordered alone or as part of the full hardware set.

Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged. However, should
your unit contain missing or damaged parts, replacements may be obtained directly from us. To obtain proper replacement
parts follow the instructions below, or fill out the form at www.tennsco.com/partsorder.html.

PART NO.

PART DESCRIPTION PART NO.

Lock bar set 944LB
Locking Handle w/keys and hardware 944LH
Locking Cam* 944LC
Cam Retainer* 944CR
Lock bar guide insert* 944GI

TO OBTAIN PROPER REPLACEMENT PARTS, PLEASE PROVIDE THE FOLLOWING INFORMATION:

●●

●

●●

●

●●

Model Number (7114) Purchase Date

●●

●

●●

Description of part(s) needed and part Your company name
number(s) as shown in Parts List (above) Contact person's name

●●

●

●●

Color (i.e. Medium Grey, etc.) Who the product was purchased from

●●

●

●●

Was item missing, or was it damaged?

●●

●●

●

●●

●●

●

●●

●●

●

●●

Tennsco Corp., P.O. Box 1888, Dickson, TN 37056-1888 Customer Service: [phone] Fax: [phone]

If requesting parts by telephone, ask for customer service and have as much of the above information ready as possible.