Tennsco 2472 User Manual

ASSEMBLY INSTRUCTIONS & PARTS MANUAL #1831108

TENNSCO COMBINATION CABINET

Models 1872 and 2472

Tennsco Corp., Dickson, TN 37056-1888  [phone]

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE!

Congratulations on your purchase of a Tennsco
Deluxe Wardrobe Cabinet! Tennsco's 1871 and 2471
storage cabinets provide a level of quality you won't
find elsewhere. They provide secure storage with a
hanging rod for jackets, clothing, and other hanging
garments, along with one shelf for hats, books, tools,
and other general storage.

These cabinets also offer two brushed chrome
handles (one fixed and one lockable with two keys),
and a three-point locking system for extra security.
Additional features include rear louvres for ventilation
and nylon lock-bar guides to ensure quiet operation.

Tennsco's cabinets are constructed from top quality
22 to 24 gauge steel with 20 gauge doors and a 16
gauge frame, and offers weight capacities of up to
200 lbs. per shelf (evenly distributed). Our attractive
and durable powder-coated paint finish will provide
for years of service.

GENERAL SAFETY INFORMATION

Some parts may have sharp edges. CARE must be
taken when handling various pieces to avoid injury. For
safety, wear a pair of work gloves when assembling or
performing any maintenance on your cabinet.

LIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder.
This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by persons
not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified or removed. UNLESS
CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

ARE HEREBY EXCLUDED:

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT

SELLERS OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place
of business or require Buyer to return the goods to Seller for inspection on Sellers premises. Transportation charges covering returned goods will be borne by
Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.

TENNSCO Corp., P.O. BOX 1888, DICKSON, TN 37056-1888

[phone] or [phone] (toll free)

Website: www.tennsco.com E-mail: [e-mail]

PK-1831108

INSTALLATION OF 1872 AND 2472 CABINETS

Tools needed: An 11/32" nut driver (provided free with unit); a hammer; and a flathead screwdriver.

Two people recommended for installation. Approximate assembly time: 15 to 25 minutes.

1. The reference numbers used throughout this

sheet refer to the illustration on the back cover.
This is to help you to identify the various parts as
they are mentioned.

2.

Place the cabinet back (Ref. No. 1) on a protected
surface to prevent scratching the paint. The
flanges on the edges should be facing
upward as shown below. Attach the left
side (Ref. No.

2) to the
back

by placing

All lances point

UP on both

B

back

Flange goes

A

under back

and side.

flange (A)
around the back
and bolting the back

Flanges face upward

and side together with seven bolts and nuts (Ref.
Nos. 20 & 21). Be sure that the lances on all shelf
adjustment strips (B) point in the same direction.

3. Attach the right side (Ref. No. 3) to the back in

the same manner as you did in step 2, again
making sure that the flange is around

the back and that

the lances
on the shelf adjustment strips are pointed in
the same direction as those on the back and left side.

5. Place the top (Ref. No. 5) onto

the unit. Be sure that the flanges
tuck inside the cabinet sides and
back. Secure with 11 bolts and
nuts (three along each
side, and five in the
back). The front
part of the
top will
bolt into
place in
step 7.

6. With both doors in the closed position, lift the door

and frame assembly (Ref. No. 6)
and place it over the cabinet
body. Be aware that the
door latches have
not yet been
attached, so
the doors
could potentially swing
open if the door frame is
held in an upside­down position.
The door
frame should
cover

the
outside edges
of the entire
storage cabinet front.

4. Place the shelf (Ref. No. 4) into the top position

on the unit by inserting the shelf edges into
the top lance on all four
shelf adjustment strips. Be
sure that the channeled
edge of the shelf is
toward the cabinet
front. NOTE: If
a lance is
too tight,
it may be
helpful
to use a
screwdriver to
SLIGHTLY pry it open.

Inset A

Use top

lance

7. With the door & frame assembly in place, attach it

securely to the unit by opening each door,
one at a time, and securing
assembly using two bolts and
twenty nuts (Ref.
Nos. 20 and

21). This will
require attach­ing nuts to
the nine
pre-welded
studs along
each side,
plus two bolts
and nuts along the top.
The bottom will attach to the frame in Step 8.

the frame