Tennsco 2470 User Manual

ASSEMBLY INSTRUCTIONS & PARTS MANUAL #1810608

TENNSCO DELUXE STORAGE CABINET

Model 1870 and 2470

Tennsco Corp., Dickson, TN 37056-1888  [phone]

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE!

Congratulations on your purchase of a Tennsco Deluxe
Storage Cabinet! Tennsco's 1870 and 2470 units are
general purpose storage cabinets that provide a level of
quality you won't find elsewhere. They provide secure
storage for office supplies, books, records, small parts,
tools, etc.

These cabinets offer five openings with four adjustable
shelves, two brushed chrome handles (one fixed and
one lockable with two keys), and a three-point locking
system for extra security. Additional features include
rear louvres for ventilation and nylon lock-bar guides to
ensure quiet operation.

Tennsco's cabinets are constructed from top quality 22
to 24 gauge steel with a 16 gauge frame, and offers
weight capacities of up to 200 lbs. per shelf (evenly
distributed). Our attractive and durable powder-coated
paint finish will provide for years of service.

GENERAL SAFETY INFORMATION

Some parts may have sharp edges. CARE must be taken
when handling various pieces to avoid injury. For safety,
wear a pair of work gloves when assembling or performing
any maintenance on your cabinet.

LIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder.
This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by persons
not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified or removed. UNLESS
CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

ARE HEREBY EXCLUDED:

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT

SELLERS OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place
of business or require Buyer to return the goods to Seller for inspection on Sellers premises. Transportation charges covering returned goods will be borne by
Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.

TENNSCO Corp., P.O. BOX 1888, DICKSON, TN 37056-1888

[phone] or [phone] (toll free)

Website: www.tennsco.com E-mail: [e-mail]

PK-1810608

INSTALLATION OF 1870 AND 2470 CABINETS

Tools needed: An 11/32" nut driver (provided free with unit); a hammer; and a flathead screwdriver.

Two people recommended for installation. Approximate assembly time: 15 to 25 minutes.

1. The reference numbers used throughout this

sheet refer to the illustration on the back cover.
This is to help you to identify the various parts as
they are mentioned.

2. Place the cabinet back (Ref. No. 1) on a

protected surface to prevent
scratching the paint.
The flanges should
be facing
upward.

Flanges face upward

3. Attach the left side (Ref. No. 2) to the back by

placing flange (A) around the back and
bolting the back
and side

Flange goes

A

under back

5. To help hold the sides in position, insert one

shelf (Ref. No. 4) into the approximate center of
the unit, inserting the shelf edges into the
lances on all four shelf adjustment strips.
Be sure that the
channeled edge of
the shelf is toward
the cabinet
front. If
a lance
is too
tight, it
may be
helpful to use

Inset A

a screwdriver to
SLIGHTLY pry it open.

6. Place the top (Ref. No. 5) onto

the unit. Be sure that the flanges
tuck inside the cabinet sides and
back. Secure with 11 bolts and
nuts (three along each side,
and five in the back).
The front of the
top will bolt
into place
in step

8.

All lances point

UP on both

together
with seven bolts

B

and side.

back

and nuts (Ref. Nos. 16 &17). Be sure that the
lances on all shelf adjustment strips (B) point in
the same direction.

4. Attach the right side (Ref. No. 3) to the back in

the same manner

that the lances on the shelf adjustment strips are
pointed in the same
back and left side.

as you did in step 3,
again making sure that
the flange is around
the back and

direction as those on the

7. With both doors in the closed position, lift the door

and frame assembly (Ref. No. 6)
and place it over the cabinet
body. Be aware that the
door latches have
not yet been
attached, so
the doors
could potentially swing
open if the door frame is
held in an upside­down position.
The door
frame should
cover

the
outside edges
of the entire
storage cabinet front.