Tennsco 1430 User Manual

ASSEMBLY INSTRUCTIONS & PARTS MANUAL #1461108

TENNSCO STORAGE CABINET

Model 1430

Tennsco Corp., Dickson, TN 37056-1888  [phone]

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE!

Congratulations on your purchase of a Tennsco
Storage Cabinet! Tennsco's 1430 units are
general purpose storage cabinets that provide
a level of quality you won't find elsewhere. They
provide secure storage for office supplies,
books, records, small parts, tools, etc.

The 1430 offers two openings with one
adjustable shelf, a locking chrome handle with

GENERAL SAFETY INFORMATION: Some parts may have sharp edges. CARE must be taken when handling various pieces to

avoid injury. For safety, wear a pair of work gloves when assembling or performing any maintenance on your cabinet.

LIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder.
This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by persons
not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified or removed. UNLESS
CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

ARE HEREBY EXCLUDED:

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT

SELLERS OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place
of business or require Buyer to return the goods to Seller for inspection on Sellers premises. Transportation charges covering returned goods will be borne by
Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.

two keys, and a three-point locking system
for extra security.

Tennsco's cabinets are constructed from top
quality 22 to 24 gauge steel, with 22 gauge
steel shelves offering weight capacities of up to
200 lbs. per shelf (evenly distributed). Our
attractive and durable powder-coated paint
finish will provide for years of service.

TENNSCO Corp., P.O. BOX 1888, DICKSON, TN 37056-1888

[phone] or [phone] (toll free)

Website: www.tennsco.com E-mail: [e-mail]

PK-1461108

ASSEMBLY OF 1430 CABINETS

Tools Needed: A free 11/32" nut driver is provided with each Tennsco cabinet (Ref. No. 17). In addition,

you will need a flathead screwdriver. A hammer is required to install the hinge pin and lock bar.

Two people recommended for assembly. Approximate assembly time: 15 to 25 minutes.

1. All reference numbers refer to the illustration on

the back cover. This is to help you to identify the
various parts as they are mentioned.

2. Prepare the header (Ref. No. 5) for

installation by inserting a bolt into
the two outside holes on each end,

as shown in Inset A.

Inset A

The center hole

should remain empty.

Header

Loosely attach nuts to

Sill

each bolt, leaving
enough slack so

that the bolt

heads may

later be

inserted into a slot.

Prepare the sill (Ref. No. 6) in the same way.

3. Place the

cabinet

back (Ref. No. 1) on a protected
surface to prevent scratching the
paint. The

flange on the bottom
of the back should be
facing upward.

Flange faces

upward

4. Attach the left side (Ref. No.2 ) to the back by

placing flange (A) around the
back and bolting the
pieces together with
seven bolts and
nuts (Ref. Nos. 18

Flange goes

A

under back

& 19). Be sure
that the lances on
all shelf adjustment
strips (B) point in the
same direction.

B

All lances point

and side.

UP on both

back

5. Attach the right side (Ref. No. 3) to the back in

the same manner as
you did in step 3.
Make sure
that the
on the right
side are
pointed in the
same direction as
those on the back and
the left side.

lances

6. Locate the

shaped
front of each

two keyhole

slots

on the

end-

-

panel bottom.
Attach the sill
(Ref. No. 6) by
inserting the loose
bolt heads (which you
attached to the sill in step 2) into

Inset B

the large end of the keyhole slots
(Inset B). Position by sliding the bolts
securely into the smaller end of the
slots. Inset C (below right) shows
improper
heads.

and proper

seating of bolt

Tighten the four nuts

securely.

Inset C

7. Insert a shelf (Ref. No. 4) near the

center of the cabinet. Do this by
inserting the

shelf edges into the lances
on all four strips. Be
sure that the channeled
edge of the shelf is
toward the

cabinet front.
If a lance is too
tight, it may be
helpful to use a
screwdriver to
SLIGHTLY
open

pry it

. (NOTE:

The
shelf may be moved
moved to another level
later, if so desired.

Improperly

seated

Shelf inserts

into tab.

Properly

seated

8. Locate the two keyhole-shaped slots on the top front

of each end-panel. Attach the
header (Ref. No. 5) in the
same
the sill,

way you

by inserting
the previously
attached loose
heads into the
large end of the
keyhole slots
Position by sliding the
bolts securely into the smaller
end of the slots. Refer to Inset C
(in step 6 above) for improper and
proper seating of the bolt heads.
Tighten the four nuts securely.

attached

bolt

(Inset D).

Two bolts

and nuts on

each side

Inset D