How it Works
Tennant
Loading...
6080E
User Manual
100 pgs3.2 Mb0
Operator's Manual
52 pgs1.53 Mb0
Table of contents
Loading...

Tennant 6080E User Manual

6080E
Home
Go To..
Parts Manual
330020
Rev. 04
éB!5ßê
This manual is furnished with each new TENNANT Model 6080E.
Home
Go To..
This manual consists of the How To Use This Manual; Standard Parts; Options; Breakdowns; and Cross Reference sections.
MACHINE DATA
Please fill out at time of installation for future reference.
Machine Model Number --6080E Machine Serial Number -­Machine Options -­TENNANT Representative/phone no. -­Customer ID Number -­Date of Installation -­Manual Number -- 330020 Revision: 04 Published: 01--00
Copyright E 1997, 1998, 1999, 2000 TENNANT, Printed in U.S.A.

HOW TO USE THIS MANUAL

Home
Go To..
This section on HOW TO USE THIS MANUAL will tell you how to:
-- Find important machine information for ordering correct repair parts.
-- Find TENNANT part numbers.
-- Order TENNANT parts and supplies.
IMPORTANT INFORMATION
When placingan order for parts, the machine model and machine serial numbe r are important. Refer to the MACHINE DATA box which is filled out during the installation of your machine. The MACHINE DATA box is located on the inside of the front cover of this manual.
HOW TO USE THIS MANUAL
The model number of your machine is on the side of the machine.
The serial number of your machine is printed on the machine data plate located as shown.
350910
6080E 330020(5--97)
350910
1-1
HOW TO USE THIS MANUAL
Home
Go To..
FINDING A TENNANT PART NUMBER
This manual contains the following sections:
-- HOW TO USE THIS MANUAL
-- STANDARD PARTS
-- OPTIONS
-- BREAKDOWNS
-- CROSS REFERENCE
The STANDARD PARTS section lists repair parts for standard machines. They are grouped in this general order:
-- General wear parts.
-- Machine frame and related parts.
-- Machine propelling system.
-- Sweepingcomponents.
-- Electrical parts.
The OPTION section lists repair parts of options. The BREAKDOWN section lists available repair
parts of major components. All sections in this manual consist of parts
illustrations and corresponding parts lists. The parts illustrations are numbered with Ref
numbers whichrefer to corresponding parts lists. The parts lists include a number of columns of
information:
-- Ref -- column refers to the reference number on the parts illustration. Ñ -- indicates the part is an assembly.
Y -- indica tes the part is included in the
assembly listed just before it.
-- TENNANT Part No. -- column lists the TENNANT part number for the part.
-- Serial Number -- column indicates the set of machines the part number is applicable to. Serial numbers change when the machine design has been modified. The most current design of the machineis shown in the main illustration, older designs are boxed in a corner of the illustration.
-- Description -- column is a brief description of the part.
-- Qty. -- column lists the quantity of that part used in that area of the machine.
1-2
6080E 330020
(3--99)
NOTE: If a service kit is installed on your
Home
Go To..
machine, be sure to keep the INSTRUCTION BULLETIN which came with the kit. It contains repair parts numbers needed for ordering future parts.
NOTE: Fasteners used in this machine may be metric or non-metric. Take care when replacing hardware to replace with same thread size.
PLACING AN ORDER
Orders may be placed by phone, fax, or by mail. Phone orders may need written confirmation. Follow the steps below to insure prompt delivery:
HOW TO USE THIS MANUAL
1. Identify t he model number of your machine.
2. Identify t he serial number of your machine.
3. Find the part number of the part you need. Do not order by page number or reference number. If you are not able to find the part number, call your TENNANT representative for help or send the old part as a sample.
4. Determine the quantity of the part you need.
5. Provide the following company information:
-- Company name
-- Customer ID Number
-- Shippingaddress
-- Billing address
-- First and last name of person ordering parts
-- Telephone number
-- Purchase order number
6. Provide definitive shipping instructions.
6080E 330020(5--97)
1-3
HOW TO USE THIS MANUAL
Home
Go To..
Any claim for loss or damage to a shipment in transit should be filed promptly with the transportation company making the delivery. Shipments willbe complete unless the packing list or order acknowledgement indicates items back ordered.
If parts received are suspected to be incorrect or defective, please contact the TENNANT representative from whom you ordered the part. They will give authorization for return and/or handle replacement shipments when required.
1-4
6080E 330020
(5--97)

STANDARD PARTS

Home
Go To..
SECTION 2
CONTENTS PAGE
Fig. 1 -- General Recommended Maintenance Items 2-2. . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . .
Fig. 2 -- Replacement Brushes 2-3. . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . . . .. .. .. . . . . . . . . . .
Fig. 3 -- Main Frame Group 2-4. . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . . . .. .. .. . . . . . . . . . .. ..
Fig. 4 -- Drive System Group 2-6. . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . . . .. .. .. . . . . . . . . . .. .
Fig. 5 -- Main Brush Group 2-8. . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . . . .. .. .. . . . . . . . . . .. ..
Fig. 6 -- Side Brush Group 2-10. . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . . . .. .. .. . . . . . . . . . .. .
Fig. 7 -- Hopper Group 2-12. . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . . . .. .. .. . . . . . . . . . .. .. ..
Fig. 8 -- Vacuum Fan Group 2-14. . . . . . . . . .. .. .. . . . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . .
Fig. 9 -- Vacuum Housing Group 2-16. . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . . . .. .. .. . . . . . . .
Fig. 10 -- Panel Filter Group 2-18. . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . . . .. .. .. . . . . . . . . . .. .
Fig. 11 -- Brush Lift Handles Group 2-20. . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . . . .. .. .. . . . . .
Fig. 12 -- Clutch and Shift Handle Group 2-22. . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . . . .. .. .. .
Fig. 13 -- Electric Motor Group 2-24. . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . . . .. .. .. . . . . . . . . .
Fig. 14 -- Battery Cover Group 2-26. . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . . . .. .. .. . . . . . . . . .
Fig. 15 -- EE Battery Cover And Circuit Breaker Group 2-28. . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . .
Fig. 16 -- Battery Cable Harness Group 2-30. . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . . . .. .. .. . .
Fig. 17 -- Instrument Panel Group 2-31. . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . . . .. .. .. . . . . . . .
Fig. 18 -- Electrical Schematic 2-32. . . . . . . . . .. .. .. . . . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . .
Fig. 19 -- Wire Harness Group 2-33. . . . . . . . . .. .. .. . . . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . .
Fig. 19 -- Wire Harness Group, EE 2-34. . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . . . .. .. .. . . . . . .
Fig. 20 -- Wire Harness Group 2-35. . . . . . . . . .. .. .. . . . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . .
Fig. 21 -- Label Group 2-36. . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . .. .. .. .. . . . . . . . . . .. .. .. . . . . . . . . . .. .. .. . .
6080E 330020(3--99)
2-1
STANDARD PARTS
Home
Go To..
350844 -- E

Fig. 1 -- General Recommended Maintenance Items

Tennant
Ref.
Part No.
Ñ 1 80269 (000000-- ) Replmt Kit, Skirts & Seals6080 1
Y 2 379214 (000000-- ) Skirt, Rear 1 Y 3 378811 (000000-- ) Kit, Side Skirt, Rh 1 Y 4 378812 (000000-- ) Kit, Skirt, Side, Lh 1 Y 5 80373 (000000-- ) Seal 1 Y 6 80315 (000000-- ) Seal 1 Y 7 373142 (000000-- ) Skirt, Hopper 1 Y 8 80392 (000000-- ) Gasket, Cuff 1 Y 9 80096 (000000-- ) Seal, Chamber 1 Y 10 80260 (000000-- ) Gasket, Vac Fan 1 Y 11 72970 (000000-- ) Rivet, Plstc 5 Y 12 80186 (000000-- ) Plate, Skirt, Retainer 5
Machine Serial Number
Description Qty.
13 80432 (000000-- ) Bag, Vacuum, Disposable 10Pk 1 14 80141 (000000-- ) Angle, Lip 1 15 222403 (000000-- ) Wheel, 2.O Dia 1 16 80188 (000000-- ) Filter Pkg, Panel, 94 Pleats 1 17 80117 (000000-- ) Kit, Repl mt Main Br Belt 6080E 1 18 80464 (000000-- ) Hose, Flex 1 19 01739 (000000-- ) Kit, Brush 1 20 01740 (000000-- ) Spring, Brush 1 21 80125 (000000-- ) Brush & Spring Assy 1 22 80152 (000000-- ) Belt, Flat 1 23 80940 (000000-- ) Belt, V 1 24 80481 (000000-- ) Pin, Main 1
2-2
6080E 330020(3--99)

Fig. 2 -- Replacement Brushes

Home
Go To..
STANDARD PARTS
3
2
1
5
4
Tennant
Ref.
Part No.
1 80042 (000000-- ) Brush, Side 1 1 378804 (000000-- ) Brush, Side STFP 1 2 80058 (000000-- ) Brush, Sweep, 24Lg Poly 1 3 80355 (000000-- ) Brush, Carpet 1 4 80351 (000000-- ) Brush, Sweep, Sandwedge 6080 1 5 378802 (000000-- ) Brush, Sweep, P&W 6080 1
6080E 330020(3--98)
Machine Serial Number
Description Qty.
350846 -- ALL
2-3
STANDARD PARTS
Home
Go To..

Fig. 3 -- Main Frame Group

22
31
30
12
26
24
14
25
25
24
15
18
16
17
21
19
20
21
20
23
28
29
35
33
32
27
38
1
2
34
36
13
11
37
7
10
5
4
9
2-4
3
8
6
6080E 330020(3--99)
Fig. 3 -- Main Frame Group
Home
Go To..
STANDARD PARTS
350848 -- ALL
Ref.
Tennant Part No.
Machine Serial Number
Description Qty.
1 80014 (000000-- ) Frame, Main 1 2 379214 (000000-- ) Skirt, Rear 1 3 80186 (000000-- ) Plate, Skirt, Retainer 5 4 80028 (000000-- ) Caster, 5.0D X 1.37 Wheel 2
Ñ 80102 (000000--003060 ) Kit, Side Skirt, Rh 1
Y 5 80333 (000000--003060 ) Skirt, Drive Side 1 Y 6 80975 (000000--003060 ) Plate, Side Skirt, Ph 1 Y 7 80026 (000000--003060 ) Retainer, .25Od 1 Y 8 72968 (000000--003060 ) Rivet, Plastic .250X.898 7
Ñ 80182 (000000--003060 ) Kit, Skirt, Side, Lh 1
Y 9 80332 (000000--003060 ) Skirt, Idler Side 1 Y 10 72968 (000000--003060 ) Rivet, Plastic .250X.898 7
11 80422 (000000-- ) Handle, Main Lh 1 12 80459 (000000-- ) Handle, Main Rh 1 13 80037 (000000-- ) Plate, Retainer 1 14 80945 (000000-- ) Lever, Clutch, Wldt 1 15 80430 (000000-- ) Handle, Steering 1
Ñ 80495 (000000-- ) Kit, Repair, Adj Handle 2
Y 16 80180 (000000-- ) Knob,#10--32,0.81Dia,Plastic 2 Y 17 80445 (000000-- ) Sleeve, Threaded 2 Y 18 80448 (000000-- ) Spring, Comp 0.34Idx.045Wire 2 Y 19 373141 (000000-- ) Pin, Handle Adjustment 2 Y 20 763066 (000000-- ) Nut,Hx Jam M16X2.0 Din 439 4
21 04400 (000000-- ) Washer-- Flt 17 X30X3 Ss M16 2 22 80105 (000000-- ) Shield, Dirt Kit 1 23 80106 (000000-- ) Bracket, Handle Stop 1 24 80288 (000000-- ) Plug, Hole .812 2 25 80061 (000000-- ) Plug, Hole .297 4 26 378770 (000000-- ) Clip 1
Ñ 378811 (003061-- ) Kit, Skirt, Rh 1
Y 27 378806 (003061-- ) Guard 1 Y 28 378809 (003061-- ) Skirt 1 Y 29 80026 (003061-- ) Retainer, .25Od 1 Y 30 41178 (003061-- ) Washer, Flat, .25 Fender 1 Y 31 20394 (003061-- ) Screw, Hex, #10 X 0.62, Fmg Ab 1 Y 32 72968 (003061-- ) Rivet, Plstc 7
Ñ 378812 (003061-- ) Kit, Skirt, Lh 1
Y 33 378807 (003061-- ) Guard 1 Y 34 378810 (003061-- ) Skirt 1 Y 35 80026 (003061-- ) Retainer, .25Od 1 Y 36 41178 (003061-- ) Washer, Flat, .25 Fender 1 Y 37 20394 (003061-- ) Screw, Hex, #10 X 0.62, Fmg Ab 1 Y 38 72968 (003061-- ) Rivet, Plstc 7
6080E 330020(3--99)
2-5
STANDARD PARTS
Home
Go To..
5

Fig. 4 -- Drive System Group

18
10
11
12
9
6
3
6
4
14
17
7
8
1
8
21
2
16
7
15
20
19
13
9
12
11
10
2-6
6080E 330020(3--99)
Fig. 4 -- Drive System Group
Home
Go To..
STANDARD PARTS
350850 -- ALL
Tennant
Ref.
Part No.
Ñ 1 80476 (000000-- ) Kit, Transaxle Assy (see breakdowns) 1
Y 2 80471 (000000-- ) Fitting, Relief 1/8 1
3 80110 (000000-- ) Sheave, Flat, 3.7Od 1 4 00500--4 (000000-- ) Key--Wdruff 0.12 0.50 Asa#0404 1 5 80498 (000000--002410 ) Guard, Belt 1 6 33373 (000000-- ) Ring, Retain,Ex,0.62Od,Heavydt 1 7 378776 (000000--003449 ) Hub, Wheel 2 7 373105 (003450-- ) Hub, Wheel 2 8 18276 (000000-- ) Pin,Dowel,0.2502Dia.X 1.50 Lg 2
9 80148 (000000-- ) Tire & Wheel Assy 2 10 222692 (000000-- ) Screw--Flat 8X1.25 25Nylon Loc 2 11 80922 (000000-- ) Washer, Finish M8 Pltd 2 12 80465 (000000-- ) Hubcap 2 13 80415 (000000-- ) Cable, Shift, Push Pull 1 14 80158 (000000-- ) Balljoint, 1 15 80429 (000000-- ) Support, Cable 1 16 80425 (000000-- ) Bolt, Bent, M6 1 17 80113 (000000-- ) Plate, Support, Cable 1 18 80962 (000000-- ) Plate Wldt, Backstop 1 19 222842 (000000-- ) Chain, Static, Brass 1 20 41139 (000000-- ) Washer--Loc Int--Ext 10 Pltd 1 21 01713 (000000-- ) Nut--Hx Std 10--32 G2 Pltd 1
Machine Serial Number
Description Qty.
6080E 330020(3--99)
2-7
STANDARD PARTS
Home
Go To..
14

Fig. 5 -- Main Brush Group

18
19
20
26
20
25
8
6
5
4
3
10
6
8
2
12
1
11
24
9
13
24
23
7
23
22
21
14
23
2-8
17
24
16
15
6080E 330020(3--98)
Fig. 5 -- Main Brush Group
Home
Go To..
STANDARD PARTS
350852 -- ALL
Tennant
Ref.
Part No.
1 80047 (000000-- ) Arm, Brush 1
2 80053 (000000-- ) Plate, Pivot 1
3 80075 (000000-- ) Pulley, Idler 1
4 80079 (000000-- ) Pulley, Idler 1
5 80159 (000000-- ) Spring, Comp, 1
6 80160 (000000--003787 ) Strip, Spring, Comp 2
6 373140 (003788-- ) Strip, Spring, Comp 2
7 80937 (000000-- ) Sleeve, .025Ob .62D .34Pm 1
8 80491 (000000-- ) Sleeve, .25Ob .38D .156Ss 2
9 80492 (000000-- ) Ring, Retaining, Ex 1 10 80048 (000000-- ) Shaft, Sheave 1 11 378805 (000000-- ) Plug, Brush Drive 1 12 00911 (000000-- ) Key Square 0.18 0.18 00.75 Lg 1 13 11329 (000000-- ) Scr--Hexssm 6X1.0 16 Nylonloc 1 14 80371 (000000-- ) Ring, Wear 2 15 80424 (000000-- ) Arm, Brush, Idler Side 1 16 80481 (000000-- ) Pin, Main Brush 1 17 379202 (000000-- ) Plug, Brush 1 18 80956 (000000-- ) Plate, Support, Cross Shaft 1 19 80379 (000000-- ) Shaft, Wldt, Cross 1 20 80387 (000000-- ) Block, Bearing 0.625Dia 4 21 80384 (000000-- ) Link Wldt, Brush Lift 1 22 80836 (000000-- ) Spring, Extension 1 23 222460 (000000-- ) Sleeve 3 24 80395 (000000-- ) Sleeve, .318B .50D .65Ss 3
Ñ 25 27880 (000000-- ) Yoke Assy. 1
Y 26 01713 (000000-- ) Nut--Hx Std 10--32 G2 Pltd 1
Machine Serial Number
Description Qty.
6080E 330020(3--99)
2-9
STANDARD PARTS
Home
Go To..
8
2

Fig. 6 -- Side Brush Group

12
11
9
10
10
13
4
3
1
6
5
7
2
2-10
6080E 330020(5--97)
Fig. 6 -- Side Brush Group
Home
Go To..
STANDARD PARTS
350854 -- E
Tennant
Ref.
Part No.
1 80045 (000000-- ) Housing, Brush, Side 1
2 80016 (000000-- ) Pivot, Bushing 2
3 80321 (000000-- ) Sleeve, 1.45B 2.1D 1.5 Pltd 1
4 80318 (000000--004308 ) Spring, Tors 2.36Idx 18 Wire 1
4 379207 (004309-- ) Spring, Tors 2.36Idx 18 Wire 1
Ñ 5 80203 (000000-- ) Motor, Side Brush 24V Rh 1
Y 80126 (000000-- ) Brush&Spring Assy Se 1 Y 80127 (000000-- ) Brush Cap Se 2
6 11516 (000000-- ) Pin,Roll,.25Odx1.75L,.250/.256 1
7 02942 (000000-- ) Pin,Hair Cotter .12Wire 2.37Sl 1
8 80155 (000000-- ) Bracket Wldt, Lift 1
9 80483 (000000--004308 ) Strip, Spring 2
9 379216 (004309-- ) Strip, Spring 2 10 76782 (000000-- ) Pin,Clevis,0.19 Dia.X 0.75 Lg 3 11 80484 (000000-- ) Spring, Comp, 0.74Idx.11 Wire 1 12 80974 (000000--004308 ) Strip, Spring 1 12 379215 (004309-- ) Strip, Spring 1 13 80010 (000000-- ) Bracket, Cable 1
Machine Serial Number
Description Qty.
6080E 330020(01--00)
2-11
STANDARD PARTS
Home
Go To..
1

Fig. 7 -- Hopper Group

6
5
7
2
3
4
2
2-12
6080E 330020(9--97)
Fig. 7 -- Hopper Group
Home
Go To..
STANDARD PARTS
350856 -- ALL
Tennant
Ref.
Part No.
1 80081 (000000-- ) Hopper 1
2 80958 (000000-- ) Bracket, Support 2
3 80315 (000000-- ) Seal 1
4 72970 (000000-- ) Rivet, Plstc 5
5 80140 (000000--003605 ) Skirt, Hopper 1
5 373142 (0003606-- ) Skirt, Hopper 1
6 80141 (000000-- ) Angle, Lip 1
7 80266 (000000-- ) Plate, Firewall 1
Machine Serial Number
Description Qty.
6080E 330020(3--99)
2-13
STANDARD PARTS
8
Home
Go To..
7
9
9
15
2
3

Fig. 8 -- Vacuum Fan Group

6
11
5
17
18
12
16
1
4
19
10
13
14
13
11
2-14
6080E 330020(3--98)
Fig. 8 -- Vacuum Fan Group
Home
Go To..
STANDARD PARTS
350858 -- E
Tennant
Ref.
Part No.
1 80314 (000000-- ) Plate, Backing, Vac Fan 1
2 16934 (000000-- ) Shaft,Brg&Flange Assy--Fan 1
3 379203 (000000-- ) Spacer 1
4 80320 (000000-- ) Impeller, 9.06 Dia X 0.375B 1
5 87299 (000000-- ) Nut--Hxflexloc .31--24 Thin Pltd 1
6 00960 (000000-- ) Key Square 0.12 0.12 00.50 Lg 1
7 00500--4 (000000-- ) Key--Wdruff 0.12 0.50 Asa#0404 1
8 01104 (000000-- ) Sheave,3L,1Gr,1.96Pd,0.62Id 1
9 46820 (000000-- ) Scr--Set .31--18X0.38 Nylon Loc 2
10 80088 (000000-- ) Vacuum Fan Housing 1
11 12273 (000000-- ) Scr--Hexssm 8X1.25 20 Nylnloc 3
12 80260 (000000-- ) Gasket, Vac Fan 1 13 80104 (000000-- ) Bar, Transitio nMtg 2 14 80029 (000000-- ) Plate, Vac Fan, Prop Rod 1 15 80940 (000000-- ) V--Belt 3L 230 -- One 1 16 69915 (000000-- ) Bolt--Carrm 8X1.25 40 4.6 2 17 80136 (000000-- ) Transition, Vacfan, Electric 1 18 67767 (000000-- ) Clamp, Cable 1 19 09385 (000000-- ) Clamp, Cable, Poly 1
Machine Serial Number
Description Qty.
6080E 330020(3--99)
2-15
STANDARD PARTS
Home
Go To..

Fig. 9 -- Vacuum Housing Group

11
17
18
15
20
21
18
24
22
28
30
2
25
26
24
29
27
10
8
10
19
9
12
3
5
6
4
4
4
3
1
26
23
4
16
6
1314
7
9
2-16
6080E 330020(01--00)
Fig. 9 -- Vacuum Housing Group
Home
Go To..
STANDARD PARTS
350862 -- ALL
Tennant
Ref.
Part No.
1 373147 (000000-- ) Kit, Replmt, Door, Filter 1
2 80373 (000000-- ) Seal 1
3 23709 (000000-- ) Catch, Draw Pull 2
4 80218 (000000-- ) Rivet, Pop .196Dx.76X38Dhd 8
5 08793 (000000-- ) Washer 8
6 80368 (000000-- ) Clip, Latch 2
7 80971 (000000-- ) Plate 1
8 80021 (000000-- ) Bracket, Sealing, Rh 1
9 80052 (000000-- ) Seal, Cover 2
10 80064 (000000-- ) Seal, Foam .62 .62 8.0 4
11 80366 (000000--004399 ) Bracket, Pivot 1
12 80011 (000000-- ) Bracket, Pivot Lh 1 13 373115 (000000-- ) Housing, Vacuum Hi Flow 1 14 80096 (000000-- ) Seal, Chamber 1 15 373116 (000000-- ) Seal, Tube, Vacuum 1 16 80017 (000000-- ) Screen, Vacuum Inlet 1 17 373123 (000000-- ) Tube, Vacuum 1 18 20394 (000000-- ) Screw, Hex, #10 X 0.62, Fmg Ab 4 19 22297 (000000-- ) Clamp, Wormdrive 1 20 373118 (000000-- ) Hose, Flex 1 21 83285 (000000-- ) Cuff, Hose 1 22 373113 (000000-- ) Coupling, Hose, Elbow 1 23 08709 (000000-- ) Nut, Hex, Lock, M08--1.25,Nl 1 24 80392 (000000-- ) Gasket, Cuff 2 25 76570 (000000-- ) Screw, Hex, M08--1.25 X 30, 8.8 1 26 32492 (000000-- ) Washer, Flat, .38 Hard 2 27 379227 (004400-- ) Bracket, Pivot Rh 1 28 379226 (004400-- ) Pin, Tapped 1 29 06942 (004400-- ) Screw, Hex M06 1 30 32490 (004400-- ) Washer, Flat .25 1
Machine Serial Number
Description Qty.
6080E 330020(01--00)
2-17
STANDARD PARTS
Home
Go To..

Fig. 10 -- Panel Filter Group

12
4
16
3
15
2
8
8
7
1
9
2
4
3
13
6
5
14
9
10
11
9
2-18
6080E 330020(3--99)
Fig. 10 -- Panel Filter Group
Home
Go To..
49309
80328
24V
24V
STANDARD PARTS
352792 -- ALL
Tennant
Ref.
Part No.
1 80436 (000000-- ) Bar, Shaker, Motor 1
2 360930 (000000-- ) Sleeve 2
3 87515 (000000-- ) Grommet, Rubber 2
4 379218 (000000-- ) Bracket, Shaker 2
5 80437 (000000-- ) Strap, Shaker Motor 1
6 44893 (000000-- ) Bar, Flat 1
7 55130 (000000-- ) Weight, Eccentric 1
8 20634 (000000-- ) Screw, Set, #10 2
9 80033 (000000-- ) Bracket, Retainer 2
10 80107 (000000-- ) Strike, Latch 1
11 23709 (000000-- ) Catch, Draw Pull 1
12 80296 (000000-- ) Switch, Rocker 1 13 54121 (000000-- ) Motor, Ele, Shaker 1 14 57804 (000000-- ) Relay, 12V 1 15 80329 (000000-- ) Timer 1 16 80188 (000000-- ) Filter Pkg, Panel, 94 Pleats 1
Machine Serial Number
Description Qty.
6080E 330020(3--99)
2-19
STANDARD PARTS
Home
Go To..

Fig. 11 -- Brush Lift Handles Group

7
12
3
6
2
14
1
5
15
11
13
8
4
3
6
3
10
12
2-20
17
16
9
6080E 330020(9--97)
Fig. 11 -- Brush Lift Handles Group
Home
Go To..
STANDARD PARTS
350866 -- ALL
Tennant
Ref.
Part No.
1 80411 (000000-- ) Plate, Mounting Rh 1
2 44847 (000000-- ) Switch, 15Amp 125/250Vac 1
3 80950 (000000-- ) Bushing, Flanged 3
4 80412 (000000--004308 ) Handle, Lift, Main Brush 1
4 379211 (004309-- ) Handle, Lift, Main Brush 1
5 80365 (000000--004308 ) Handle, Lift, Side Brush 1
5 379210 (004309-- ) Handle, Lift, Side Brush 1
6 80480 (000000-- ) Spring, Detent 2
7 80372 (000000-- ) Grip, Vinyl .18X.75.2.00 1
8 80979 (000000-- ) Grip, Vinyl .18X .75X 5.00 1
9 80190 (000000-- ) Cable Assy, Main Brush 1
Ñ 10 27880 (000000-- ) Yoke Assy. 1
Y 11 01713 (000000-- ) Nut--Hx Std 10--32 G2 Pltd 1
12 80425 (000000-- ) Bolt, Bent, M6 2 13 80429 (000000-- ) Support, Cable 1 14 80302 (000000-- ) Replacement Kit, Sidebrush Cable 1 15 36376 (000000-- ) Pin,Clevis, .19 Dia.X .50 Lg 1 16 80414 (000000-- ) Plate, Access, Rh 1 17 49266 (000000-- ) Tie, Cable 1.75D Max 7.50Lg 2
Machine Serial Number
Description Qty.
6080E 330020(01--00)
2-21
STANDARD PARTS
Home
Go To..

Fig. 12 -- Clutch and Shift Handle Group

6
4
12
11
8
10
3
4
2
7
1
9
5
2-22
6080E 330020(5--97)
Fig. 12 -- Clutch and Shift Handle Group
Home
Go To..
STANDARD PARTS
350864 -- ALL
Tennant
Ref.
Part No.
1 80428 (000000-- ) Plate, Pivot, Lh 1
Ñ 2 80184 (000000-- ) Yoke Assy, 10--32 1
Y 3 01713 (000000-- ) Nut--Hx Std 10--32 G2 Pltd 1
4 80950 (000000-- ) Bushing, Flanged 2
5 80480 (000000-- ) Spring, Detent 1
6 80979 (000000-- ) Grip, Vinyl .18X .75X 5.00 1
7 80927 (000000-- ) Handle, Shift 1
8 80589 (000000-- ) Plate, Access, Lh 1
9 80496 (000000-- ) Spacer, Pivot .62Lg 1
10 80192 (000000-- ) Cable, Pull Cl 1
11 80425 (000000-- ) Bolt, Bent, M6 1
12 36376 (000000-- ) Pin,Clevis, .19 Dia.X .50 Lg 1
Machine Serial Number
Description Qty.
6080E 330020(5--97)
2-23
STANDARD PARTS
Home
Go To..

Fig. 13 -- Electric Motor Group

24
23
3
1,2
25
17
16
6
15
4
20
14
20
5
4
21
11
22
9
10
12
13
7
4
18
19
2-24
8
6080E 330020(3--99)
Loading...
+ 70 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use