Tendercare Mini Tilt, Mini Tilt Wheelchair Workshop Manual
Mini Tilt Wheelchair Workshop Manual
Authority. Quality Controller
Authorised by J Adams November 05
W
W
O
ORRKKSS
H
H
O
OPP
M
MAA
N
NUUAALL
FFoor
r
M
MIINNIITTIILLTT
W
WHHEEEELLCCHHAAIIRR
Please read these instructions carefully
before attempting to maintain the wheelchair
Warning
The cartons are heavy
Moving and unpacking must be performed with care
Tendercare Ltd
Mini Tilt Wheelchair Workshop Manual
Mini Tilt Wheelchair Workshop Manual
Authority. Quality Controller
Authorised by J Adams
Page 2 of 17
November 05
Headrest
Push
Handle
Tipping
Lever
Brake
Lever
Armrest
TTEENNDDEERRCCAARRE
E
MINI TILT WHEELCHAIR
Backrest
Lock
Gas Strut
Operating Lever
Tendercare Ltd
Mini Tilt Wheelchair Workshop Manual
Mini Tilt Wheelchair Workshop Manual
Authority. Quality Controller
Authorised by J Adams
Page 3 of 17
November 05
CONTENTS
ITEM DESCRIPTION PAGE
1 Your Mini Tilt Wheelchair Manual……………………….……... 4
2 Transit Packaging…………………………………………………... 4
3 Tools and Torque Settings………………………………………….. 5
4 Preparing for Use……………………………………………….…... 5
4.1 Unfolding the Wheelchair……………………………………… 5
4.2 Fitting and Removing Headrest………………………………… 8
4.3 Tilt in Space Mechanism……………………………………….. 8
4.4 Tyres and Brakes……………………………………………….. 8
4.5 Rear Wheel Position…………………………………………….. 9
5 Cleaning…………………………………………………………….. 10
6 Maintenance………………………………………………………… 10
6.1 Routine Maintenance…………………………………………… 10
6.2 Six Monthly Maintenance Procedure……………………….…. 11
7 Repairs………………………………………………………….…… 11
7.1 Front Castors …………………………………………………... 11
7.2 Rear Wheels……………………………………………………. 12
7.3 Brake Adjustment………………………………………….…… 12
7.4 Replacing Armpads…………………………………………….. 12
7.5 Replacing Seat Upholstery……………………………………... 13
7.6 Replacing Backrest Upholstery………………………….……... 13
7.7 Replacing Gas Struts…………………………………………… 13
8 Important Points…………………………………………………….. 15
9 Dimensions and Weights……………………………………….…… 15
10 Parts List…………………………………………………………….. 16
Tendercare Ltd
Mini Tilt Wheelchair Workshop Manual
Mini Tilt Wheelchair Workshop Manual
Authority. Quality Controller
Authorised by J Adams
Page 4 of 17
November 05
1. Your Mini Tilt Wheelchair Manual
The purpose of this manual is to help you get the best from your wheelchair. It does this by
telling you how to complete those maintenance tasks that can be carried out by a competent
person. The manual also tells you when you should contact the manufacturer who is: -
Tendercare Ltd
PO Box 3091, Littlehampton, BN16 2WF
Tel (01903) 726161
Fax (01903) 734083
Email info@tendercareltd.com
2. Transit Packaging
Warning the transit carton is heavy, moving and unpacking must be done with care.
Observe all lifting and handling regulations.
1) The wheelchair is supplied in a cardboard carton of approximate size and weight 700 mm
wide x 570 mm deep x 950 mm high. Weight of carton 23 kg.
2) Stand the Carton upright making sure it is supported and cannot fall over. Open the
carton and remove any packages or packing, which could obstruct the removal of the
frame.
3) When you have removed the contents and checked you have all the items listed below you
should dispose of the packaging at your local recycling centre.
4) Check that you have the following items: -
Item Component Number Yes No
1 Mini Tilt wheelchair 1
2 Armrests 2
3 Push handles 2
4 Thumb Screws (for push handles) 4
5 Footrests 2
9 User Manual 1
Check all items for damage to paintwork, alignment, welds etc.
If any items are damaged or missing please contact Tendercare,
preferably by fax 01903-734083 within 36 hours of delivery.
The general assembly of the Mini Tilt wheelchair is illustrated on page 2.
A parts list is given on page 16.
Tendercare Ltd
Mini Tilt Wheelchair Workshop Manual
Mini Tilt Wheelchair Workshop Manual
Authority. Quality Controller
Authorised by J Adams
Page 5 of 17
November 05
3. Tools and Torque Settings
The following tools are required to dismantle and reassemble the wheelchair: -
Spanners and sockets: - 8mm, 10mm, 13mm, 19mm and 24mm.
Hexagon Keys: - 3mm 4mm and 5mm.
Torque Wrench: - range 0 to 60 Nm.
Screwdriver: - Crosshead.
Torque settings: -
Spanner Size Torque Nm
8mm 10
10mm 15
13mm 25
19mm 45
24mm 54
4. Preparing for use
The wheelchair is supplied ready for use. The following pre-delivery procedures should be
carried to check that the wheelchair has not suffered damage during transit and that all
features operate satisfactorily.
Warning: - When raising or lowering the backrest, ensure that you hold the frame so
that you avoid any danger of catching your fingers in moving parts.
4.1 Unfolding and folding: - make sure all items below are working properly
With the wheelchair standing upright.
4.1.1 Backrest supports: - Make sure the locks operate positively and freely
Standing behind the wheelchair lift the backrest locking pins using the
ball shaped handgrips at the bottom of the backrest tubes. Turn them
so that they lock into the groove arrowed opposite
Lift backrest supports vertical.
Lock the supports in position by moving the finger grips out of the
arrowed groove (see photo) and making sure they have moved to the
bottom of the slot in the backrest tube.
Tendercare Ltd
Mini Tilt Wheelchair Workshop Manual
Mini Tilt Wheelchair Workshop Manual
Authority. Quality Controller
Authorised by J Adams
Page 6 of 17
November 05
4.1.2 Push handles: - Check adjustment and security.
The push handles are fitted to the wheelchair prior to delivery. Make sure that they are in
place and that two thumbscrews are fitted to each push handle.
To adjust the height of the push handles unscrew (turn anti clockwise) the two thumbscrews
at either side and near the top of the backrest. Lift or lower the push handles to the height
required then retighten (turn clockwise) the thumbscrews.
To prevent the push handles moving in use these screws must be tight. Check tightness daily.
4.1.3 Armrests: - Check fitting
Standing at the side of the wheelchair place each armrest into the holes in the armrest bracket
(See photo above). To fit the armrest loosen thumbscrew “A” (turn anti clockwise) and turn
catch “B” a quarter turn then push the armrest into the socket. Make sure that the longer part
of the tube supporting the armpad points to the backrest.
To lock the armrest turn catch “B” upright and tighten the thumbscrew “A”. (See photo
opposite
To adjust the height of the armrest loosen the thumbscrew, turn the catch and move the
armrest to the desired height. Turn the catch making sure it is one of the holes in the armrest
vertical tube and retighten the thumbscrew.
CATCH
“B”
THUMBSCREW
Loading...