RF Exposure Statement
To maintain compliance with FCC’s RF Exposure
guidelines, This equipment should be installed and
operated with minimum distance between 20cm the
radiator your body: Use only the supplied antenna.
1
11N Wireless Broadband Router User Guide
Copyright Statement
is the registered trademark of Shenzhen
Tenda Technology Co., Ltd. All the products and product
names men tioned herei n are the trademarks or
registered t rademarks of thei r respecti ve holders.
Copyright of the whole product as integration, including
its accessories and software, belongs to Shenzhen Tenda
Technology Co., Ltd. Without the permission of Shenzhen
Tenda Technology Co., Ltd, any individual or party is not
allowed to copy, plagiarize, reproduce or translate it into
other languages.
All the photos and product specifications mentioned in
this manual are for references only. Upgrades of software
and hardware may occur, and if there are changes, Tenda
is not responsible for notifying in advance. If you would
like to know more about our product information, please
configuration interface which enables you to configure it
with ease. It i s based on the latest IEEE802. 11n
standard, and i s backwar d compatible with devices of
IEEE802.11b/g standards.
The W316R,including router, wireless AP, four-port
switch and fi rewall in on e,provides powerful online
monitor function and supports URL filter and MAC filter.
With WDS function, it can repeat and amplify wireless
signals so as to enlarge network coverage area. It truly
supports UPnP and WMM to make your audio and video
smoother. With QoS function, it can efficiently distribute
the downloading rate for the clients. Additionally, wi th
super compa tibility, the r outer can break the access
limits i n so me areas so that mul tiple computers can
share the Internet access.
1
11N Wireless Broadband RouterUser Guide
1.1 Package Contents
Please veri fy the fol lowing i tems afte r you open the
package:
¾ One W316R Wireless Broadband Router
¾ One Quick Installation Guide
¾ One Power Adapter
¾ One Software CD
If any of the listed i tems are mi ssing or damag ed,
please contact the Tenda resel ler for immediate
replacement.
1.2 LED Indicators and Port Description
Panel and LED indicators show:
2
11N Wireless Broadband RouterUser Guide
LED indicator description on the front panel
Back panel port show
3
11N Wireless Broadband RouterUser Guide
Back panel port description
4
11N Wireless Broadband RouterUser Guide
Chapter 2 Product Installation
1. Please use only the included power adapter to
power y our router. ( NOTE: Use of an unmatched
power adapter could cause damage to this product).
2. Pl ease connect the router’s LA N port to your
computer with an Ethernet cable as shown below.
5
11N Wireless Broadband RouterUser Guide
3. Please connect your broadband line provided by your
ISP to the router’s WAN port.
4. Insert the included software CD into the CD drive of
your computer . After the software automatically
initiates, d ouble c lick the “Setup” icon and follow t he
instructions to compl ete the i nstallation. You can a lso
enter the router ’s W eb-based Uti lity to compl ete the
configuration.
6
11N Wireless Broadband RouterUser Guide
Chapter 3 How to configure to access
the Internet
3.1 How to Set the Network Configurations
Network Configurations under windows XP
1. Right click “My Network Places” on your computer
desktop and select “Properties”.
2. Right cli ck “ Local Area Connection ” and sel ect
“Properties”.
7
11N Wireless Broadband RouterUser Guide
3. S elect “ Internet Pro tocol (TCP/IP) ” and click
“Properties”.
4. Select “Obtain an IP address automatically” and
8
11N Wireless Broadband RouterUser Guide
“Obtain D NS ser ver addr ess automatically ”.
Click “OK” to save the configurations.
Or select “Use the following IP address ” and enter
the IP addr ess, Subnet mask, Default gatewa y a s
follows:
¾IP Address: 192.168.0.XXX: (XXX i s a number
from 2~254)
¾ Subnet Mask: 255.255.255.0
¾ Gateway: 192.168.0.1
¾ DNS se rver: You s hould in put t he DNS s erver
address provided by your IS P. Otherwise, you can
enter 1 92.168.0.1. Cli ck “OK” to save the
configurations.
9
11N Wireless Broadband RouterUser Guide
Network Configurations under windows 7
1. Click the network i con on the l ower right corner of
your computer desktop, and then cli ck” Open Network
and Sharing Center”.
10
11N Wireless Broadband RouterUser Guide
2. Click “Change adapter settings” o n the left s ide of th e
window.
3. Ri ght click “Local Area Connecti on” and sel ect
“Properties”.
11
11N Wireless Broadband RouterUser Guide
4. Double click” Internet Protocol Version 4(TCP/IPv4)".
12
11N Wireless Broadband RouterUser Guide
5. Select “Obtain an IP address automatically” and
“Obtain D NS ser ver addr ess automatically ”.
Click “OK” to save the configurations.
Or select “Use the following IP address ” and enter
the IP addr ess, S ubnet mask, D efault gatewa y as
follows:
13
11N Wireless Broadband RouterUser Guide
¾IP Address: 192.168.0.XXX: (XXX i s a number
from 2~254)
¾ Subnet Mask: 255.255.255.0
¾ Gateway: 192.168.0.1
¾ DNS se rver: You s hould in put t he DNS s erver
address provided by your IS P. Otherwise, you can
enter 1 92.168.0.1. Cli ck “OK” to save the
configurations.
3.2 Log in to the Router
1. To access the R outer’s Web-based Utility, launch a
web browser such as Internet Explorer or Firefox and
enter http://192.168.0.1. Press “Enter”.
14
11N Wireless Broadband RouterUser Guide
2. Type “admin” in the “Password” field. Click “OK”.
3. If you enter the correc t password, you will come to
the router’sweb-based utility as is shown below.
15
11N Wireless Broadband RouterUser Guide
3.3 Fast Internet Access
Two kinds of fast access methods are provided on the
router’s web-based utility: ADSL dial-up and DHCP.
If you select ADSL dial-up, you only need to enter the
access accou nt and access password as well as the
wireless password, and then click “Ok” to complete the
settings.
If you select DHCP, you only need to enter the wireless
password and click “Ok” to complete the settings.
16
11N Wireless Broadband RouterUser Guide
The defaul t access meth od i s A DSL dial-up and the
access account and access password are the same as
the ADSL dial-up account and password, which you can
inquire your broadband ISP. For other access methods,
please refer t o WAN settings in chapter 4.The wi reless
password can only consist of 8 characters, the default is
12345678 and you can modify it when necessary.
17
11N Wireless Broadband RouterUser Guide
3.4 Fast Encryption
The router provi des two encryption s etting screens,
one i s si mple and easy , the other i s adv anced (For
advanced setting, please refer to chapter 5.2).
Simple and easy screen:
Log on to the router’s web-based utility and you may
set encrypti on for the router. The defaul t adopts
WPA-PSK mode and AES Al gorithm. The default
password is 12345678, as shown below.
NOTE: The wi reless password can only be 8
characters in length and t he default is 12345678, you
can modify it when necessary.
18
11N Wireless Broadband RouterUser Guide
Chapter 4 Advanced Settings
4.1 System Status
System status screen al lows you to view the route r’s
WAN port status and system status.
Connection status: It di splays the router ’s WAN
connection status.
Disconnected: It i ndicates the router ’s WAN por t
hasn’t been connected with the network cable.
Connecting: It i ndicates the router ’s WAN port i s
obtaining IP address.
Connected: It indicates the Router i s well
connected with the ISP.
WAN IP:IP address obtained from ISP.
Subnet mask: Obtained from ISP.
Gateway: Obtained from ISP.
DNS server: Obtained from ISP.
Alternate DNS server: Obtained from ISP.
19
11N Wireless Broadband RouterUser Guide
Connection type: It displays your current access
method.
LAN MAC address :It di splays the R outer’s LA N
MAC address.
WAN MAC address:It displays the Router’s WAN
MAC Address.
System t ime:It di splays the syste m’s updat ed
time
Connected client :It displays the number of the
connected c omputers(normally it displ ays the
number of clients whose IP addresses obtained via
DHCP server)
Software v ersion : It di splays t he R outer’s
software version;
Hardware v ersion : It di splays the R outer’s
hardware version.
20
11N Wireless Broadband RouterUser Guide
4.2 WAN Settings
Virtual Dial-up (PPPoE)
¾ Mode: Show your current connection mode.
¾ Access Ac count: Enter the account provided by
your ISP.
¾Access Pas sword: Enter the passwo rd provided
by your ISP.
¾MTU: Maximum Transmission Unit. It is the size of
the largest data packet that can be sent o ver the
21
11N Wireless Broadband RouterUser Guide
network. The default value is 1492. Do NOT modify
it unless necessary, but if a specific website or web
application s oftware c annot o pen o r b e e nabled,
you can try to change the MTU value to 1450, 1400,
etc.
¾Service Name: The connection name for current
PPPOE, enter i t if necessary ,otherwise, l eave it
blank.
¾AC Name: The service name, enter it if necessary,
otherwise, leave it blank.
¾Connect Automatica lly: Connect automati cally
to the Inter net after rebooti ng the system or
connection failure.
¾Connect on Demand:Re-establish your
connection to the Internet after the speci fic time
(Max Idle Time). Zero means you are connected to
the Internet al l ti mes. Otherwi se, enter the
minutes to be elapsed before you are disconnected
from the Internet.
¾Connect Manually: Connect to the Internet by
users manually.
¾Connect on Fixed Time: Connect to the Internet
during the time you fix automatically.
NOTE:
The “ Connect on Fixed Time ” goes i nto effect
only when you have set the current time in “Time
22
11N Wireless Broadband RouterUser Guide
settings” from “System tools”.
Static IP
If your ISP provides you the stati c IP, pl ease cho ose
static IP, and you need to enter the IP address, subnet
mask, gateway, DNS serv er and al ternate DNS server
provided by your ISP or network administrator。
¾ Mode: Show your current connection mode.
¾ IP address: Enter the WAN IP address provided by
your ISP. If you are not c lear, please inquire your
local ISP.
¾Subnet ma sk: Enter the WAN S ubnet Mask
provided by your ISP. Generally it is 255.255.255.0。
¾Gateway: Enter the Gateway provided by your ISP.
If you are not clear, please inquire your local ISP.
23
11N Wireless Broadband RouterUser Guide
¾DNS serv er: Enter th e necessary DNS server
provided by your ISP.
¾Alternate DNS serv er: Enter the second DNS
address if your ISP provides, which is optional.
Dynamic IP (Via DHCP)
If your connection mode is Dynamic IP, it means every
time you access the Internet, you will get a different IP.
You don’ t need to en ter any parameters in this mode,
just Click “Ok” to finish the settings.
PPTP
24
11N Wireless Broadband RouterUser Guide
¾ Mode: Show your current connection mode.
¾ PPTP server address: The IP address or domain
name o f t he d estination server a nd it is u sed t o
specify the desti nation addres s whi ch needs fo r
PPTP connection.
¾Username/Password: Used to v alidate i dentity
when connecting to the PPTP server.
¾Address mode: Set the router’s IP address mode,
you can select either “Dynamic” or “Static”. If your
ISP doesn’ t provide the IP addre ss, pl ease select
“Dynamic”.
¾IP address: Please enter the IP address provided
by your ISP, inquire your local I SP if you a re not
clear.
25
Loading...
+ 70 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.