TENDA TECHNOLOGY AC7 User Manual

1 2

 Install the router

Connect devices

Quick Installation Guide

For pr oduct o r func tion de tails, p lease g o to www. tenda cn.com
to do wnloa d user gu ide.

AC1 200 Sma rt Dua l-Ban d WiFi R outer

Mod el: AC 7

Package contents

Wirele ss router * 1
Power adapter * 1
Eth ernet cable * 1
Quick installat ion gui de * 1

If an y item is i ncorrect , missi ng, or dam aged, p lease k eep the o rigin al pack age and
con tact th e local r esell er or dis tribu tor imm ediately.

Scan t o downl oad the
Tenda WiFi a pp, or get
it on Go ogle Pl ay/Ap p
Stor e.

If you want to replace your original router connected to the internet with a PPPoE user name and password, start from Step 1. Otherwise, start from Step 2.

Step 1: Migrate your PPPoE user name and password from

Step 2: Connect to the internet

your original router

1. Power on your original and new ro uters.

2. Connect the WAN port of the original router to port 1, 2 or 3 /I PTV of th e n ew router using an
Eth ernet cable.

3. Wait about 6 seconds (When the WAN, LAN indicators of the new router turn solid on after
blink ing fas t, your migration is successf ul).

4. Remove the original router.

Powe r

Powe r

3/IPTV WAN

2 1

RST/WPS

WIFI

POWER

New router

WAN

Original Router

Ethernet Cable

1. Power off your modem, and remove its b atter y (if any ).

2. Connect t he WAN port of the new ro uter to the LAN p or t of your modem using an Ethernet cable.

3. Reinstall your m odem's battery, then power on your m odem and the new rout er.

Tip: I f you acc ess the i ntern et thro ugh Ethe rnet j ack, co nnect WA N port o f the rou ter to the E thern et jack u sing an E thern et cabl e.

Powe r

WAN

RST/WPS

WIFI

2 1

3/IPTV WAN

POWER

Ethernet cable

Mod em

Or

Ethernet jac k

Internet

Connect yo ur wireless devic es to the router using the SSID and WiFi
password labeled on th e bottom/front of t he router.

AC7

AC7

Tenda_ XXXXXX

WiFi
Password

Tenda_ XXXXXX

Set ting

Tenda _XX XXXX

Connect yo ur wired devices to ports 1, 2 or 3/IPTV of the router using
Eth ernet cables. The LAN indicator fast blinks twice.

WAN

Ether net cab le

3/IPTV WAN

2 1

RST/WPS

WIFI

POWER

 Set up you router

3

1. Star t a web browser on a device that has connected to the
router. Enter tendawifi.com in the address bar, and press
Enter.

2. Click Start. (If the following page does not appear, refer
to Q1 in the FAQ. )

3. Confirm or set the related parameters. Then click Next.
( PP PoE is used as an example here.)

.

PPP oE

Con necti on Type:

IS P User Na me:

IS P Passwo rd:

Ente r the use r name fr om your I SP.

Ente r the pas sword f rom your I SP.

Imp ort PP PoE use r name an d passw ord from
the or igina l route r

Skip

4. Set your WiFi name (SS ID), WiFi password and login password.
Then click Nex t.

Note: The WiFi password is used to connect to the WiFi network

of the router, and the login password is used to log in to
the web UI to manage the router.

WiFi Settings

WiFi N ame

WiFi pa sswor d of 8-32 c harac ters

Set the WiFi pa ssword as the log in password of th e admin account .

Logi n passw ord of 5-3 2 chara cters

Not R equir ed

Not R equir ed

Reconnect your wireless devices to the router's WiFi network
using the WiFi names and the WiFi password you set. The wired
devices can access the internet directly if they have connected to
port 1, 2 or 3/IPTV.

You'r e all set ! You can n ow connect t o

To chan ge sett ings of o ther fea tures , click t he "Mor e" butto n below.

Tenda _xxxx xx

or Tend a_xxx xxx_5 G

Mor e

Tip: If the internet is still inaccessible af ter the configuration,

please refer to Q2 in the FAQ.

LE D indicator

SYS

WAN

LA N

WiFi

Status

Solid on

Slow blinking

Solid on

Fast blink ing

Off

Solid on

Fast blink ing
twice

Off

Solid on

Fast blink ing

Slow blinking

Off

Description

The router is star ting.

If the indicator is still solid on after your router
completes startup, it indicates that the system
is faulty.

The router is work ing properly.

The WAN port is connected properly.

Data is being transmitted over the WAN port.

The WAN port is disconnected or connected
improperly.

Por t 1, 2 or 3/ IPT V is connected properly.

A new device is connec ted to port 1, 2 or 3/IP T V.

None of por ts 1, 2 and 3/IPT V is connected or
connected proper ly.

At least the 2.4 GH z or 5 GH z WiFi net work is
enabled.

Data is being transmitted wirelessly.

The router is performing WPS negotiation.

The WiFi network is disabled.

Por t/Button

PO WER

WI FI

Used to connect to the power adapter included in the package.

Press the button once to enable/disable the WiFi network of the
router.

Description

Used to start the WPS negotiation process, or to reset the router.

WPS: Press the button of the router, and enable the WPS function

RS T/WPS

of another device within 2 minutes to establish a WPS connection.

Reset: When the SYS indicator blinks, hold the button down for
about 8 seconds. The router is reset successfully when all the
LE D indicators blink once.

WAN

1/2

Used to connect the router to the internet.

They are LAN por ts used to connec t to wired devices such as
computers or switches.

It is a default LAN port.

3/IP T V

But if the IPTV function of the router is enabled, it serves only as
an IPTV port used to connect to a set-top box.

FAQ

Q1:IcannotlogintothewebUIoftherouterafterenteringtendawifi.com,what
shouldIdo?

A1: Try the following solutions and l og in aga in:
Ensure that you r Ether net cab le with i nternet connectivity is pl ugged i nto the WAN port of the
router rather t han a LA N port.
Ensure that you r wireless device i s connected to the router' s SSID.
Ensure that you r wired device is con necte d properly to port 1, 2 or 3/IPT V of the router by
Eth ernet cable. The device is al so set to Obtain an IP address automatically an d Obtain

DN S server address automatically.

Ensure that ten dawifi.com is entered cor rectly, or try logging by 192.168.0. 1.
Replace th e web browser.
Reset the ro uter and log in again.

Q2:Icannotaccesstheinternetaftertheconfiguration,what
shouldIdo?

A2: Log in to the web UI of the router, and check your router 's connectio n
status on th e Internet Stat us page.
If your router is connec ted to th e internet succes sfull y as the fi gure
shown below, tr y the following solutions:

Internet Rou ter

Connect your wireless devices to the WiFi network of the router using the
new WiFi name and password you set.
If Connection failed appears on the page:
— Click Internet Settings on the web UI to check whether the connection type
and parameters you entered are correct.

Connec tion ty pe

PP PoE

Dynamic IP
add ress

Sta tic IP a ddress

Inf ormation provided by you r ISP

IS P user na me and I SP password

Non e

IP address, sub net m ask, gateway, D NS ser ver and o ther
par ameters

— Connect the Ethernet cable with internet connectivity to your computer.

If your computer cannot access the internet, consult your ISP.
Otherwise, reconnect the Ethernet cable with internet connectivity to your

router, reset your router and configure it again.

Q3: How to reset the router?

A3: When the SYS indicator blinks, hold down the RST/WPS button for about 8
seconds. The router is reset successfully when all the LED indicators blink once.

CE Mark Warning

Thi s is a Clas s B product. In a domesti c environm ent, this product may caus e
rad io interference, in which case the user may be required to ta ke adeq uate
measures.
Operations in the 5.15-5.25GHz band a re re stric ted to in door us e only.
Thi s equip ment should be installed and operated with minimum distance
20cm betwe en the ra diator & your body.
The m ains pl ug is used as disconnec t device, th e disconnect device s hall
remain readily opera ble.
NOTE: (1) The manufacturer is not resp onsib le for any radio or TV
inter ference caused by unauthorized mod ifications to this equipment. ( 2)
To avoi d unnecessar y radiation interference, it is recommended to use a
shielded RJ45 ca ble.

Dec laration of Conformity

Hereby, SH EN ZHEN TENDA TECH NOLO GY CO., LTD. decl ares that the radio
equipment type AC7 is in compl iance w ith Directive 2014/53/EU.
The f ull tex t of the EU declaration of co nformity is available at t he followi ng
internet a ddress:
htt p://w ww.tenda cn.com/en/service/downloa d-cata-101.html
Operate Frequenc y:

2.4G: E U / 2400-24 83.5 MHz (CH1-CH 13)
5G: EU / 5150 -5250 MHz (CH36-CH48)
EI RP Power (Max.):

2.4 GHz: 19.86 dBm
5 GH z: 22.96 dBm
Software Version: V15.03.06.X X

Caution:
Adapter Model: BN052-A09 009E/ BN05 2-A09009B
Manufacture: S HE NZHEN HEWE ISHUN NE TWO RK TECHNO LOGY C O., LTD.
Input: 100 - 240 V AC, 50 /60 Hz, 0.3 A
Output: 9 V 1.0 A
: DC Volta ge

FCC Statement

Thi s equip ment has been teste d and found to comply with the limits for a Cl ass B digital
device, pursuant to Part 15 of the FC C Rules. These limits are des igned to provide
reasonable protection against harmful interference in a residential in stall ation. This
equipment generates, uses and can radiate radio fre quenc y energy and, if n ot installed
and used in ac cordance with the instruction s, may cause harmful inter feren ce to radio
com munic ations. However, there is no guarantee t hat interference will no t occur in a
particular installatio n. If this equipment do es caus e harmf ul interfere nce to radio o r
tel evisi on recepti on, whi ch can be d etermined by turning the equipment off a nd on, th e
user is enco uraged to try to c orrec t the inter ference by one or m ore of the fol lowing
measures:
— Reorient or reloc ate the receiving ante nna.
— Increase the sepa ration between the equipment an d receiver.
— Connect the equipment into an outlet on a circu it different from that to which the
receiver is connecte d.
— Consult the dealer or an experienced radio/ TV technician for help.
The d evice is for i ndoor u sage only.
Thi s device complies with Par t 15 of the FCC Rules. O peration is subject t o the follow ing
two condit ions: (1) this device may no t cause h armfu l inter feren ce, a nd (2) th is device
must accept any i nterference received, including inter ference th at may cause undesired
operation.

Radiation Exposure Stateme nt

Thi s device complies with FCC radiation exposure limits set forth for an uncontrolled
enviro nment a nd it als o complies with Par t 15 of the FCC RF R ules.
Thi s equip ment should be installed and operated with minimum distance 20cm
between th e radiator & your body.

Operating frequency: 2412-2462MHz, 5150-5250MHz, 5725-5850MHz

Operating frequency: 2412-2462MHz, 5150-5250MHz, 5725-5850MHz

Caution:

Any changes or modification s not exp ressly approved by the party responsible fo r compliance
cou ld void the user's authority to operate this equipment.
Thi s transmitter must not be co -located or op erating in conjunction with any o ther an tenna or
tra nsmit ter.

NOTE: (1) The manufacturer is not resp onsib le for any radio or TV interfere nce caused by
unauthor ized mo dific ations to this equipment . (2) To avoid unnecessary radiat ion
inter ference, it is recommended to use a sh ielde d RJ45 cable.

Operating Temperature: 0 °C - 40 °C
Operating Humidity: (10% - 90%) RH, non-condensing

REC YCLING

This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE). This means that this product must be handled
pur suant to European directive 201 2/19/ EU in ord er to be recycled or
dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization
or to the retailer when he buys new electrical or electronic equipment.

Copyright © 2 018 Shenzhen Tenda Techn ology Co., Ltd. All rights reserved.

Tenda is a regis tered trad emark l egall y held by Shenzhen Tenda Technolo gy
Co., Ltd. Other bran d and product na mes men tioned herein are trademarks
or registered trademarks of their respe ctive h older s.
Specification s are subject to change without notice.

Technical Support

Shenzhen Tenda Technology Co., Ltd.
6-8 Floor, Tower E3, NO.1001 , Zhong shanyuan Road, Na nshan D istri ct,
Shenzhen , China . 51805 2
US A hotline: [phone]
Can ada hot line: 1-888-998-8966
Website: ht tp:// ww w.tend aus.com
Email: support.us [e-mail]
Hong Kong Hotline : [phone]
Website: ht tp:// ww w.tend acn.com
E-mail: support@tenda. com.cn