Tenda W322P 11N User Manual

11N Wireless PCI Adapter User Guide

-- 1 --

11N Wireless PCI Adapter User Guide

Copyright Statement

is the registered trademark of
Shenzhen Tenda Technology Co., Ltd. All the products
and product names mentioned herein are the
trademarks or registered trademarks of their
respective holders. Copyright of the whole product as
integration, including its accessories and software,
belongs to Shenzhen Tenda Technology Co., Ltd.
Without the permission of Shenzhen T enda T echnology
Co., Ltd, any individual or party is not allowed to copy ,
plagiarize, imit ate or tra nslate it into o ther la nguag es.

All the photos and product specifica tions mentione d in
this guide are for references only. As the upgrade of
software and hardware, there will be changes. And if
there are changes, Tenda is not responsible for
informing in adv ance. If y ou want to kn ow more abou t
our product information, please visit our website at
www.tenda.cn

.

-- 1 --

11N Wireless PCI Adapter User Guide

Table of Content

Chapter 1 Introduction........................................1

1.1 Product Feature .......................................2

1.2 Product Deployment .................................3

1.3 Indicator Description ................................4

1.4 Package Contents.....................................4

Chapter 2 Installation Guide.................................5

Chapter 3 Client Utility Interface......................... 10

3.1 Station Mode .........................................11

3.1.1 Station Mode Topology ......................11

3.1.2 Status ............................................12

3.1.3 Site Survey .....................................13

3.1.4 Profile Management ..........................14

3.1.5 Statistics.........................................16

3.1.6 WPS Setting ....................................16

3.2 AP Mode ...............................................18

3.2.1 AP Mode Topology ............................ 18

3.2.2 Basic Setting ...................................19

3.2.3 Security Setting ...............................20

3.2.4 Access Control .................................21

3.2.5 About ............................................. 23

Appendix One: Acronyms and Terms ...................24

Appendix Two: Product Specification....................27

Appendix Three: How to connect with PSP............27

-- 2 --

11N Wireless PCI Adapter User Guide

Chapter 1 Introduction

W322P/P+ utilizes the most advanced wireless
networking technology, IEEE802.11n (Draft 2.0), and
well backwards complies with 802.11b/802.11g
standards. It can effectivly reduce “dead spots” and
multiplies times of wireless signals in coverage area.

W322P/P+ supports WPS (Wi-Fi Protected Setup)
encryption method which can free you from
remembering long passwords. Soft Ap feature can help
you establish wireless LAN networking as quickly as
possible. Besides, it supports PSP, NDS and WII
connecting with Internet and Xlink Kai to enjoy on-line
gaming, and WMM function makes your voice and
video more smooth.

Note:

The only difference between W322P and

W322P+ is that W322P+’s antenna can be
detachable.

-1-

11N Wireless PCI Adapter User Guide

1.1 Product Feature

 Complies with IEEE 802.11n (Draft 2.0), IEEE

802.11g, IEEE 802.11b standards

 Provides 32-bit PCI interface
 Provides 300Mbps receiving rate and 300Mbps

sending rate

 Supports 20MHz/40MHz frequency width
 Auto-detects and changes the network

transmission rate

 Provides two work modes: Infrastructure and

Ad-Hoc

 Supports Soft AP to establish your wireless

LAN networking quickly

 Supports 64/128-bit WEP, WPA, WPA2

encryption methods and 802.1x security
authentication standard

 Supports WPS (Wi-Fi Protected Setup)

encryption method to free you from
remembering long passwords

 Supports WMM to make your voice and video

more smooth

-2-

11N Wireless PCI Adapter User Guide

1.2 Product Deployment

W322P/P+ Wireless PCI Adapter offers fast,
reliable and cost- effective solution for
wireless access. Deployment as follows;

 For staff who requires higher mobility in the

office, they want to have access to traditional
wired or wireless network in any place of the
company;

 Enterprise or individual who requires often

changes in lay out of network cables;

 Companies or places which are not suitable for

LAN cable laying out because of budget or
objective building, including places of great
interests, rent places or places for short-term
usage;

 Company or individual who avoids using

expensive cables, renting cables or renting
rights for access.

-3-

11N Wireless PCI Adapter User Guide

1.3 Indicator Description

In the front panel of W322P/P+, there is a LED
indicator blinking when data communication is going
on.

1.4 Package Contents

Unpack the packets, and please find the following
items:

 One W322P/P+ 11N Wireless PCI Adapter
 One CD-ROM

-4-

11N Wireless PCI Adapter User Guide

Chapter 2 Installation Guide

This chapter is to assist you how to use the included
CD-ROM which comprises the Setup Wizard and the
Client Utility Interface.

The following steps on Setup Wizard are taken the
Windows XP as example.

1. Please insert the Wireless PCI Adapter into the

PCI port of your computer.

2. “Found New Hardware” system dialogue appears,

and selects “Cancel” to use the included Setup
Wizard for fast installation; of course, you also can
select “Next” to install by manual.

-5-

11N Wireless PCI Adapter User Guide

3. Inert the included CD-ROM into the CD-ROM
drive of your computer, and the Welcome screen
appears. (If not appear, double click the “Setup”
icon.)

-6-

11N Wireless PCI Adapter User Guide

4. Click “Enter”.

5. Click “Next” to start installing.

-7-

11N Wireless PCI Adapter User Guide

6. Click “Change…” to select the directory path, or
click “Next”.

7. Select “OK” and “Next” in the following window.

-8-

11N Wireless PCI Adapter User Guide

8. During the installation, the following dialogue

maybe appears. Click the “Continue Anyway” to
continue. There is no security threat to your
computer.

9. Click “Finish” to complete the installation.

-9-

11N Wireless PCI Adapter User Guide

Chapter 3 Client Utility Interface

This software is for the W322P/P+ Wireless PCI
Adapter management. If it does not appear, select
“Start”—“All Programs” —“Tenda”—“W322P”, or click
the shortcut on your PC’s desktop.

Note:

In the Windows XP, you can select the included
W322P/P+ Client Utility Interface or the Windows
XP internal wireless application to configure the
device.

There are two client utility applications in W322P/P +:
Station mode and AP mode.

Note:

In this utility interfac e, Station M ode (Clie nt Mode)
is the default access way.

-10-

11N Wireless PCI Adapter User Guide

3.1 Station Mode

3.1.1 Station Mode Topology

In this mode, W322P/P+ serves as a client to
receive the wireless signals to access the Internet .

-11-

3.1.2 Status

11N Wireless PCI Adapter User Guide

In the Network Status window, it displays something
on wireless adapter and wireless network status,
including SSID, Authentication type, Encryption Type,
IP address, subnet mask and gateway and so on.

-12-

3.1.3 Site Survey

The Site Survey is used to scan the available wireless
network around, showing the wireless network’s signal
strength and other information which provides basis
for you to access which wireless network.

11N Wireless PCI Adapter User Guide

Connect: select one entry in the wireless network
list and click the button to connect the device with
the selected network.
Refresh: rescan the wireless network around.

-13-

3.1.4 Profile Management

This window saves the general wireless parameters for
different profiles, which is used to fast connect the
wireless network you need.

UP/DOWN: To change the profile’s sequence in
the list.

Connect: To activate one profile.
New: To create a new profile and configure the

site status and security setting.

Modify: To modify one existing profile.
Delete: To delete one existing profile.

11N Wireless PCI Adapter User Guide

-14-

11N Wireless PCI Adapter User Guide

(Site Status)

(Security Setting)

-15-

11N Wireless PCI Adapter User Guide

3.1.5 Statistics

Statistics is used to summarize Rx and Tx data packets,
including the success and error packet amount.

Clear: click this button to renew the statistics.

3.1.6 WPS Setting

WPS setting is enabled only on WPS-compliant
devices.

-16-

11N Wireless PCI Adapter User Guide

PIN： Enter the Pin code and click the “PIN” to
automatically connect the wireless adapter with
wireless devices around.
PBC： Click the “PBC” to complete auto-check and
connections between wireless adapter and other
wireless device.

Refresh: to update the Pin code.
Rescan: to rescan the WPS-compliant wireless

network around.
Disconnect: to disconnect the connected wireless
network.

-17-

11N Wireless PCI Adapter User Guide

3.2 AP Mode

3.2.1 AP Mode Topology

The device also can serve as an access point to
transmit wireless signals and create wireless network,
allowing other wireless clients to access the network.

Click the AP Mode icon to enter the AP Mode interface.

-18-

11N Wireless PCI Adapter User Guide

3.2.2 Basic Setting

This window is used to configure the AP’s basic para­meters, including SSID, Wireless Mode and Channel.

SSID: Wireless network’s ID name scanned by
wireless adapter.
Wireless Mode: 802.11b/802.11g/802.11b/g
mixed.

Channel: 1~11 channels provided.
Restore Default: to restore the set parameters to

default factory default settings.
Apply: to make the changes made take effect.

-19-

11N Wireless PCI Adapter User Guide

3.2.3 Security Setting

This window is used to configure the wireless
network’s security authentication, providing WEP,
WPA-PSK, WPA2-PSK, and WPA-PSK/WPA2-PSK
encryption methods.

WEP：10/26 bits Hex or 5/13 ASCII support.
WPA-PSK：8~32 bits ASCII support.
WPA2-PSK：8~32 bits ASCII support.
WPA-PSK/WPA2-PSK：8~32 bits ASCII support.

-20-

11N Wireless PCI Adapter User Guide

Note:

1. The Hex characters include 0~9 numbers and

a~f letters.

2. ASCII characters include any numbers/letters

and characters.

3.2.4 Access Control

Access Control is based on the MAC address to decide
that the specified client connects to the wireless
network, or disables it to access the wireless network.

-21-

11N Wireless PCI Adapter User Guide

Filter Policy:

Disabled: to disable the filter function.
All Permitted: to permit all cl ients in th e list to

access the wireless network.
All Blocked: to refuse all clients in the list to

access the wireless network.
MAC Address：to input the client’s MAC address to
implement the corresponding filter policy. For
example: b0000a8cd702.

Add: to add the entered MAC address into the list.
Delete: to delete one existing MAC address in the

list.
Remove All: to delete all clients’ MAC address in
the list.
Apply: to make the changes made take effect.

-22-

11N Wireless PCI Adapter User Guide

3.2.5 About

This window displays something about software
version and wireless adapter.

-23-

11N Wireless PCI Adapter User Guide

Appendix One: Acronyms and Terms

WLAN Wireless Local Area Network

802.11 A family of specifications developed by

the IEEE for WLAN technology.

802.11a An extension to 802.11 WLAN standard
that provides up to 54 Mbps transmis­sion in the 5 GHz UNI radio band.

802.11b An extension to 802.11 WLAN standard
that provides up to 11 Mbps
transmission in the 2.4 GHz ISM radio
band. 802.11b uses DSSS modulation.

802.11g An extension to 802.11 WLAN standard
that provides up to 54 Mbps
transmission in the 2.4 GHz ISM radio
band. 802.11b uses OFDM modulation
and is backwards compatible with

802.11b.

Ad-Hoc A group of computers each with wireless

adapters, connected as an independent
WLAN.

AES Advanced Encryption Standard

-24-

11N Wireless PCI Adapter User Guide

BSSID Basic Service Set ID
DHCP Dynamic Host Configuration Protocol
DSSS Direct Sequence Spread Spectrum.

DSSS is one of two types of spread
spectrum radio. The other is
frequency-hopping spread spectrum
(FHSS).

QoS Quality of Service
OFDM Orthogonal Frequency Division

Multiplexing

RADIUS Remote Authentication Dial In User

Service

RTS Request to Send
SSID Service Set Identifier. A 32-character

unique identifier attached to the header
of packets sent over a WLAN that acts as
a password when a mobile device tries
to connect to the BSS.

TCP/IP Transmission Control Protocol/Internet

Protocol

TKIP Temporal Key Integrity Protocol
WDS Wireless Distribution System

-25-

WEP Wired Equivalent Privacy. A security

protocol for

WLANs defined in the IEEE 802.11

standard.

WPA Wi-Fi Protected Access
WPA2 Wi-Fi Protected Access 2. The next

generation of

Wi-Fi security, based on the 802.11i

standard.

WPA2-PSK Wi-Fi Protected Access 2-Pre-shared

Keys

WPA-PSK Wi-Fi Protected Access-Pre-shared Keys

11N Wireless PCI Adapter User Guide

-26-

11N Wireless PCI Adapter User Guide

Appendix Two: Product Specification

Standard

Port 32-bit PCI 2.2 interface
Frequency Range 2.4～2.4835GHz

IEEE802.11g, IEEE802.11b,
IEEE802.11n

Transmission Rate

Antenna Gain

Transmission
Power

Modulation Method
Working Temper. 0℃～40℃
Storage Temper. -40℃～70℃
Working Humidity 10％～90％RH non-condensing

Provides 300Mbps receiving rate
and 300Mbps sending rate

2T2R 2.2dBi antennax 2

Max. 19dbm

OFDM, CCK

-27-

11N Wireless PCI Adapter User Guide

Appendix Three: How to connect with PSP

Topology of PSP connecting with W322P/P+

1.

2. To configure PSP with Ad-Hoc mode

Select Network Settings

-28-

11N Wireless PCI Adapter User Guide

Select Ad-Hoc mode

Select Channel

-29-

11N Wireless PCI Adapter User Guide

3. In W322P/P+ Utility Interface scan PSP and

double-click to connect the wireless
network.

4. In Site Survey check “enable PSP connection

mode” box.

-30-

11N Wireless PCI Adapter User Guide

5. To configure Xlink Kai

Select “Start”→ “All programmers” → “Xlink Kai
Evolution VII” → “Start Kai Config” to configure the
user name, password and other parameters as
follows.

6. Login Xlink Kai

Select “Start”→ “All programmers” → “Xlink Kai
Evolution VII” → “Start Kai”. PSP will connect with
Xlink Kai automatically. The following window will
indicate the connection is established well now.

-31-

11N Wireless PCI Adapter User Guide

-32-