Tenda TEI480T, TEI490T, TEI4000 User Guide
TEI480T/490T/4000TEI480T/490T/4000
Enterprise & Net-bar Level Router
User's ManualUser's Manual
WWW.TENDA.CN
Copyright Statement
is the registered trademark of Shenzhen Tenda
Technology Co., Ltd. Other trademark or trade name mentioned herein
are the trademark or registered trademark of the company. Copyright
of the whole product as integration, including its accessories and
software, belongs to Shenzhen Tenda Technology Co., Ltd. Without
the permission of Shenzhen Tenda Technology Co., Ltd, individual or
party is not allowed to copy, plagiarize, imitate or translate it into other
languages.
All the photos and product specifications mentioned in this manual
are for references only, as the upgrading of software and hardware,
there will be changes. And if there are changes, Tenda is not
responsible for informing in advance. If you want to know more about
our products information, please visit our website at www.tenda.cn
TEI480T/490T/4000 Enterprise & Net-bar Level Router
Table of Contents
Chapter One Introduction………………………………………………...…...3
1.1 Function……………………………………………………….……………...3
1.2 Unpacking……………………………………………………………….…...5
Chapter Two Hardware Installation………………………………………….6
2.1 Front Panel………………………………………………………………..…6
2.2 Rear Panel…………………………………………………………….……..7
2.3 Physical Environment………………………………………………….……7
2.4 Steps………………………………………………………………….…..…..7
Chapter Three Connect to the Broadband Router……………….……….8
3.1 Set up LAN Connection……………………………………………….……8
3.2 Set up WAN Connection……………………………………………………8
Chapter Four Configuration on the Router………………………...………9
4.1 Set up proper Network Configuration…………………………………..…9
4.2 ISP Configuration………………………………………………...……...…10
4.2.1 Wizard………………………………………………………….………….10
4.2.1.1 PPPoE (ADSL)……………………………………….…………………11
4.2.1.2 Dynamic IP……………………………………………….……………..11
4.2.1.3 Static IP……………………………………………………….…………11
4.3 Configuration…………………………………………………..……………12
4.3.1 Start and Log In…………………………………………………………..12
4.3.2 Running Status…………………………………………………………...12
4.3.3 General Setting……………………………………………..……………13
4.3.3.1 LAN Setting……………………………………………….…………….13
4.3.3.2 WAN Setting…………………………………………….…………...…14
4.3.3.3 MAC Clone……………………………………………………………..15
4.3.3.4 DNS Server……………………………………………………..……...16
4.3.3.5 Access Limit…………………………………………………………….16
4.3.4 DHCP Server……………………………………………………………..17
4.3.4.1 LAN DHCP Server………………………………………..……………17
4.3.4.2 DHCP Client List…………………………………………………… .. 18
2
TEI480T/490T/4000 Enterprise & Net-bar Level Router
4.3.5 Advance Setting…………………………………………….....…………19
4.3.5.1 Statistic……………………………………………………………….…19
4.3.5.2 Port Monitor…………………………………………………………….20
4.3.5.3 VLAN……………………………………………………………...…….20
4.3.5.4 Bandwidth Control……………………………………………..………21
4.3.5.5 LAN IP Control…………………………………………………..……..22
4.3.5.6 ARP Bind………………………………………………………..………22
4.3.6 Virtual Server………………………………………………………….….23
4.3.6.1 Virtual Server…………………………………………….………….….23
4.3.6.2 UPnP Setting………………………………………..………….……....25
4.3.6.3 DMZ…………………………………………………………….….……25
4.3.7 Security Setting…………………………………………….…………….26
4.3.7.1 Client Filter………………………………………………..……………26
4.3.7.2 URL Filter……………………………………………………………….27
4.3.7.3 MAC Filter………………………………………………………………28
4.3.7.4 Defense Network Attack……………………………..………………..29
4.3.7.5 Remote Control………………………………………………….……..30
4.3.7.6 Special Application Filter………………………………………………31
4.3.8 Route Setting………………………………………………….……….…31
4.3.8.1 System Routing Table………………………………………………….31
4.3.8.2 Static Routing Table……………………………………………………32
4.3.9 System Tool………………………………………………..….………….32
4.3.9.1 Time Setting…………………………………………………………….33
4.3.9.2 DDNS………………………………………………………….…..…….33
4.3.9.3 Backup/ Resume settings…………………………………..…...…….34
4.3.9.4 Software Upgrade ………………………………………….….…...….35
4.3.9.5 Restore to Factory Setting………………………………….……....…36
4.3.9.6 Restart……………………………………………………………...…...36
4.3.9.7 Change Password……………………………………….….……..…..37
4.3.9.8 System Log………………………………………………….………….37
4.3.9.10 Log out……………………………………………………………...…37
3
TEI480T/490T/4000 Enterprise & Net-bar Level Router
Chapter One Introduction
Thanks for purchasing TEI480T/490T/4000 Enterprise/Net-bar level router.
TEI480T/490T/4000 is Tenda’s latest multifunctional broadband access
products specially designed for Net-bar, community, enterprise and school.
TEI480T/490T/4000 are adopting the world level high quality, high stability
Intel IXP high level network processor, main Frequency is up to 266/533
MHz, adopting six-layers PCB professional design, fully ensuring the
powerful function and super stability of the machine. Full duplex data
transferring up to 200Mbps, supports up to 60,000 Link counts, data packing
is fast and stable. Powerful Firewall is able to prevent various hacker
attacks, ARP attacks and cheating and ARP virus etc.
TEI480T/490T/4000 are equipped with all the common function of other
broadband routers, besides, TEI480T/490T/4000 also supports Statistic
monitoring on clients, Bandwidth control based on IP address, Link Count
Controlling on a certain computer, IP and MAC address binding, Port
Mirroring, VLAN, UPnP, DDNS, VPN Pass-through and Firewall etc. Please
read this user’s manual carefully before using.
1.1 Function
Compliant with IEEE802.3, IEEE802.3u, IEEE802.3x
Supports CSMA/CD, PPPoE, PPP, IP, ARP, DHCP, TCP, UDP, HTTP,
FTP, DNS protocol
Supports 1 10/100Mbps Auto-Negotiation WAN port, connectable to
xDSL/Ethernet/Cable
4
TEI480T/490T/4000 Enterprise & Net-bar Level Router
Supports 4 10/100Mbps Auto-Negotiation LAN ports, connectable to
LAN
Supports port bandwidth control, port VLAN dividing and port mirroring
Supports Statistic function, enables administrator to analyses the
whole network usages status
Support Web-Management function including IP client filtering, URL
Filtering, MAC Address filtering etc.
Support VPN Pass-through
Supports QoS configuration based on IP or Port, enables you to
control the bandwidth of a certain client
Supports IP and MAC address binding, prevent from ARP attacks
Support virtual server, special software, DMZ and static routing
Supports Link count configuration and limit the Link count of a certain
computer
Built-in firewall, supports IP address Filtering, URL Filtering，MAC
Address Filtering
Prevent from DoS attack, ARP attack, able to separate the computer
which is infected by virus
Support remote Web Management, English configuration Interface,
supports simple and easy configuration guide
TEI4000 supports one SFP expansion slot, supports optical fiber
connection
5
TEI480T/490T/4000 Enterprise & Net-bar Level Router
1.2 Unpacking
ITEM Quantity
TEI480T/490T/4000 Enterprise and Net-bar Level router 1 Unit
Power cord 1
User’s Manual 1 copy
Quality Warranty Card 1 copy
Quality Passed Certificate 1 copy
Fast installation guide 1 pcs
Mounting Brackets 4 pcs
Rubber feet used for shock cushioning 4 pcs
6
TEI480T/490T/4000 Enterprise & Net-bar Level Router
Chapter Two Hardware Installation
2.1 Front Panel
a. Reset: Button for Resetting the router. Please press the Reset Button for
5 seconds and the SYS LED Indicator would be blinking. After 5 seconds,
please un-press the button, the router would restore to factory default
setting and restart automatically.
b. LED Indicators:
LED
Indicator
POWER Indicating the
SYS Indicating the
Link/Act Indicating the
100Mbps Indicating the When the LED for 100M lights ON, the
Description Function
When the power LED lights on, the
Status of the Power
Status of the
System
Status of WAN and
LAN
Switch is receiving power
When the SYS LED is blinking, the
system is working normally.
When the SYS LED lights ON or OFF,
the system is working abnormally.
When the LED lights ON, the
respective port is successfully
connected to the Ethernet network.
When the LED is blinking, the
respective port is transmitting or
receiving data.
7
TEI480T/490T/4000 Enterprise & Net-bar Level Router
Speed of WAN and
LAN
c. WAN Port: Wide Area Network (RJ-45). Please connect the xDSL Modem
or the Ethernet access cable to the WAN port of the router.
d. LAN Port: Local Area Network (RJ-45). Please connect the LAN port to
computer, Hub or Switch.
2.2 Rear Panel
Power: Please use the power attached in the package.
2.3 Physical Environment
Required Physical Environment for Installation:
Please place the router on a sturdy level surface and install the router
in a site free from high heat.
Please place the router in wet or dirty places.
respective port is working at the speed
of 100M;
When the LED for 100M lights OFF, the
respective port is working at the speed
of 10M
Please do not wipe the router with wet cloth.
Recommend operating environment:
Temperature:0℃~38℃(32℉~100℉)
Humidity: 5%~90% RH (Non-condensing)
2.4 Steps
a. Set up LAN Hardware connection
8
TEI480T/490T/4000 Enterprise & Net-bar Level Router
Please connect the LAN port with the switches or Hubs in the LAN. Or you
can also connect the LAN port of your router directly to the LAN adapter of
your computer.
b. Set up WAN Hardware connection
Please connect your xDSL or Ethernet to the WAN port of the router with
Cat. 5 cable.
c. Connect the power cord
Please connect the power cord correctly and the router would start
automatically.
Note: TEI4000 supports one SFP expansion slot, supports optical fiber
connection
9
TEI480T/490T/4000 Enterprise & Net-bar Level Router
Chapter Three Connect to the Broadband Router
3.1 Set up LAN Connection
Please connect the LAN port with the switches or Hubs in the LAN. Or you
can also connect the LAN port of your router directly to the LAN adapter of
your computer.
3.2 Set up WAN Connection
Please connect your xDSL or Ethernet to the WAN port of the router with
Cat. 5 cable.
Dynamic IP: To distribute IP Address through DHCP service
Static IP: To connect to the Internet through fixed IP Address provided by
your ISP
Chapter Four Configuration on the Router
Before using the router, please have proper network configuration on your
computer, this would enables you to have normal communication with the
router.
4.1 Set up proper Network Configuration
Please set the IP address of your computer as auto-obtain or Fix IP
Address. The router has its factory default IP address which is
“192.168.0.1”, please open IE and enter “192.168.0.1” in the address
bar. The system would require the user to enter User Name and
Password as the figure below. Please enter the User Name and
10
TEI480T/490T/4000 Enterprise & Net-bar Level Router
Password in the dialogue box (the default value for User name and
Password are “admin”). It is recommended to change the User Name
and Password when you enter into the system for the first time.
Enter the configuration Interface and on the left hand side of the page, you
could see 10 function menus including: Running Status, Wizard, General
Setting, DHCP Server, Advance Setting， Virtual Server, Security Setting,
Route Setting, System Tool, Logout. When you select the respective button,
more options would appear.
4.2 ISP Configuration
This router supports 3 types of common used access modes to the
Internet (the default access mode is dynamic IP access):
PPPoE (ADSL): Using PPPoE dialing up to have Internet connection
Dynamic IP: Broadband network etc use DHCP services to appoint IP
addresses
11
Loading...