User’s ManualUser’s Manual
8/16/24 Port Giga Switch
TEG1008S/1016S/1024S
Manufacturer：shenzhen Tenda Technology Co.,ltd
Address:
Xixing lndustrial Zone,Nanshan
District,Shenzhen,P.R.CHINA
+86-755-27657180
FAE:
Postcode: 518108
Website: http:// www.tenda.cn
Copyright Statement
is the registered trademark of
Shenzhen Tenda Technology Co., Ltd. Other
trademark or trade name mentioned herein are the
trademark or registered trademark of the company.
Copyright of the whole product as integration,
including its accessories and software, belongs to
Shenzhen Tenda Technology Co., Ltd. Without the
permission of Shenzhen Tenda Technology Co.,
Ltd, individual or party is not allowed to copy,
plagiarize, imitate or translate it into other
languages.
All the photos and product specifications mentioned
in this manual are for references only, as the
upgrading of software and hardware, there will be
changes. And if there are changes, Tenda is not
responsible for informing in advance. If you want to
know more about our products information, please
visit our website at www.tenda.cn
Content
1、Product Specification ………………… 1
1.1 Article list .…………………………… 1
1.2 Switch Front panel and back panel
specification…………………………
1.3 LED Indicator specification………… 1
1.4 Features …………………………… 2
1.5 Technology parameter …………… 3
2、Installation ……………………………… 5
2.1 Switch to PC……………………… 5
2.2 Switch to HUB ……………………… 5
2.3 Switch to Switch …………………… 6
3、Appendix ……………………………… 6
1
1. Product Specification..
TEG1008S/1016S/1024S Giga Switch is designed
to resolve the Enterprise and Internet Coffee Data
transferring Bottle-Neck,it has 8/16/24
10/100/1000Mbps Auto-Negotiation Ethernet
ports, supports Auto MDI/MDI-X function. These
Giga ports can be used as normal port, as were as
Uplink port to connect
Customer can replace the 100Mbps switch by
a TEG1008S/1016S/1024S to resolve the server
terminal connectivity bottleneck issue. Customer
can access the Giga switch into the Enterprise and
Internet Coffee as a prime switch to improve the
speed between different departments or Servers.
It’s a excellent function and reasonable price
Giga switch .
1.1 Article list
Check the articles carefully after you open the
packing as below:
9 1 piece 8/16/24 Giga Port Fast Ethernet
switch.
9 1 piece Power Cable.
9 1 pair “L” nog , 8 pieces screw, 4 pieces
rubber pads.
9 1 piece User’s manual .
1.2 Switch front panel and back panel specification
8/16/24 Giga Port Fast Ethernet switch front panel
includes RJ45 area in the right side and situation
LED Indicator in the left side area.
8/16/24 10/100/1000Mbps RJ45 port.
Each 10/100/1000 port has 1 LINK/ACT indicator,
1 100M indicator, 1 Power indicator in the front
panel.
Back plane has a 1AC power port, used for AC
power input.
1.3 LED Indicators Specification:
The LED indicators of the Switch include Power、
Link/ACT and 100M. You can know the switch’s
work situation through these LED Indicators.
The following shows the LED indicators for the
backbone network.
1
Switch along with explanation of each indicator.
LED
Indicator
POWER
LINK/
ACT
100M Green Light
1000M Green Light
Remark: 1.100Mbps indicator described above is
optional.
2.100/1000M port may blinking together with
Link/Act when it transfer data.
1.4 Features
TEG1008S/1016S/1024S Giga switch has High
speed dynamic memory, support packet store and
forward function. TEG1008S/1016S/1024S Giga
switch combined store and forward function and
dynamic memory to make sure sending the packet
to each port from the memory effectively. Support
IEEE802.3x Full Duplex and Half Duplex
backpressure flow control. Control the data flow
Color Status Description
This indication
Green Light
— Off
Green Light
Green Blinking
on when the
Switch is turned
on
If this indicator is
not lighting, check
the AC power
connector to
ensure proper
connectivity of the
power cable and
the switch.
The other device
connects to the
port of the Switch.
The port is
transmitting or
receiving data
The switch
connects the
other device at
100Mbps speed.
The switch
connects the
other device at
1000Mbps
Speed.
2
between the sending and receiving nodes to
prevent any possible packet loss. It Supports
auto-negotiation function, detect the network
connectivity such as 10M/100M half duplex, full
duplex ,1000M full duplex work model. No need
manual set, plug and play. The speed at each Port
can up to 2000M. It’ s the best choice for
upgrading from the normal 10/100M LAN to 1000M
powerful function network , makes reality the
compatibility and no slot connection among the
10M,100M,
1000M.
1.5 Technology parameter
Features
Sstandard
Protocol CSMA/CD
Topological
structure
Network
Cable
Port Quantity 8/16/24
Forwarding
Model
MAC
Address
Table
IEEE802.3 10BASE-T
Ethernet
IEEE802.3u
100BASE-TX/FX Fast
Ethernet
IEEE802.3 ab Giga byte
Ethernet standard.
Star
10BASE-T:
Cat3 UTP or above
100BASE-TX:
Cat5 UTP /STP
1000Base-T: Cat5 ,
Cat5e or Cat6
UTP/STP
10/100/1000Mbps
ports ,
Performance
Fast store and
forwarding
8K
3
Packet
Filtering/
Forwarding
Rate
MAC
Address
Learning
Physical and Environment function
POWER
Temperature
Humidity 5%~95% no coagulation
AC INPUT
POWER
Physics and
Environment
features
Humidity 5%~95% no coagulation
Performance Function
z Compliance to the IEEE802.3、IEEE802.3u、
IEEE802.3ab Ethernet Protocol , support
10/100/1000Mbps 3 kinds transfer model
together.
z Supports NWAY auto-negotiation function,
detect speed, duplex, flow control automatically,
can choose the best network connectivity model
automatically, Avoid the complex setting
procedure. Support the PNP.
z Auto MDI/MDIX functions; predigest the
network span and maintenance.
z Support IEEE802.3x duplex control, half duplex
Backpressure control.
z As high as16/32/48Gbps backboard bandwidth,
support Non-blocking wire-speed forwarding.
14880pps（10Mbps）per
port
148800pps（100Mbps）
per port
1488000pps
（1000Mbps）per port
Auto-learning,
auto-aging.
External Powerful Work
power adapter
Operation: 0°C ~50°C
Storage: -30°C ~60°C
AC100~240V
50/60Hz
5W-20W Watts
maximum
Operation: 0°C ~45°C
Storage: -30°C ~60°C
4
z Use the store-transfer frastructure, support
MAC address auto-learning function, integrated
8K MAC address table.
z Internal Powerful function Power supplier, the
16/24 ports Switch’s are 19 inches standard steel
bracket structure.( TEG1008S is 9 inches
standard steel case)
2. Installation
TEG1008S/1016S/1024S Support the desktop
and mount installation, please fix the rubber pads
on the case bottom to prevent the case from being
scraped. Please be careful the following during the
installation:
¾ Don’t put heavy article in the switch.
¾ Convenience receptacle and equipment
should be within 1.5 meters.
¾ Check power supply is confirmed the safe
Connection.
¾ Make sure there ’ s enough ventilation
through whom can dissipate heat well.
16/24 giga switch can fixed into 19 inches bracket ,
please use the 2 pieces screws to fix the “L” nog
into the two sides of the front panel of the switch,
then fix the switch in the proper position in the
bracket by the “L” nog, Please also tie all the
other screws attached for safety consideration.
2.1 Switch to PC
A PC can be connected to the
TEG1008S/1016S/1024S switch via Category
5/Cat5E UTP/STP cable, because the switch has
the MDI/ MDI-X function. PC can connect any port
of the TEG1005/1008 via Parallel or crossing
cable without necessity of distinguishes of Parallel
and Crossing cable.
2.2 Switch to HUB
A 10Base-T/100Base-TX HUB can be connected
to the TEG1008S/1016S/1024S Giga
Switch via Cat5/Cat5E UTP/STP cable, because
the Giga switch has the MDI/ MDI-X function, you
can connect any port of the Giga switch from the
Uplink port (MDI-II) of the HUB or the other ports
5
via parallel/crossing cable.
2.3 Switch to Switch
Similar to the connectivity between the HUB and
Switch, you can uplink from any port of the
TEG1008S/1016S/1024S to any port of the other
switch via Cat5/Cat5E STP/UTP cable.
Notice: The TEG1008S/1016S/1024S Port
Giga Switch has auto-negotiation function, the
port indicator situation dependents on the work
model negotiation result, the indicator situation
specification is as the indicator specification
described above.
after the connected , then you need to check if the
other Network device and network cable are
connected normally.
3. Appendix
◆RJ-45 PIN SPECIFICATION
When the TEG1008S/1016S/1024S work as
1000Mbps work mode, you will need to use all the
4 Pairs pin of the Cat5/Cat5e cable. Please
match the Pin Pairs correctly; the following are the
definition of the standard RJ-45 socket and
connector:
Figure 3.1 the standard RJ-45 Socket/connector
RJ-45 Connector pin definition
Pin S/N.
1
2
3 B_RX + (receiver)
4
5
6
7
If the LED Indicators don’t light
1 2 3 4 5 6 7
Signature
A_TX + (sender )
A_TX - (sender )
C_TX + (sender )
C_TX - (sender )
B_RX - (receiver)
D_RX + (receiver)
6
8
◆Parallel and crossing cable
TEG1008S/1016S/1024S has auto MDI/MDI-X
function, it can distinguishes the parallel and
crossing cable automatically when you connect
the switch to other device ; Meantime
TEG1008S/1016S/1024S transfer automatically to
make sure the fast connectivity and
communication ( From TD sending change to RD
receiving , or From RD receiving to TD sending )
1 TD
2 TD
3 RD
6 RD
Figure 3.2 Connect to other switch/HUB via
Parallel cable.
1 RD
2 RD
3 TD
6 TD
Figure 3.3 Connect to other switch/HUB via
crossing cable
D_RX - (receiver)
+
-
+
-
+
-
+
-
+
RD
1
+
TD
3
-
6
TD
+
RD
1
-
RD
2
+
TD
3
-
TD
6
7
Loading...