Page 1
PoE30G-AT
IEEE 802.3at Gigabit PoE Injector
www.tendacn.com/en/
Page 2
PoE30G-AT
IEEE 802.3at Gigabit PoE Injector
Products Description
PoE30G-AT PoE injector is compliant with IEEE 802.3af and
IEEE802.3at standard, with auto-detects PD equipment. Provide
DC power to PoE devices, plug and play, easy for networking
deployment and the output power consumption up to 30W.
PSE30G-AT can auto-start short-circuit function to cut o power
supply when meet too high current or electricity interruption, to
prevent equipment burnout and avoid networking failure caused
by electricity interruption or installing error. This function make
PSE30G-AT can be widely applied to wireless network devices,
bluetooth, IP Phone which compliant with IEEE802.3af/at.
Matched with Ethernet/ Power separator to change the current
networking into source LAN, easy management, strengthen
controlling and decrease the maintenance cost.
01
PoE30G-AT
Accessory Products
Page 3
Key Feature
Product Features
•
Delivers power and data through one Ethernet cable for easy network extension.
•
Compatible with IEEE 802.3af/at compliant powered devices.
•
PoE Port Delivers power up to 100 meters.
•
Plug and Play, no configuration required.
Power over Ethernet
Support IEEE802.3af/at standard, automatically detect and identify
powered devices compliant with the standard and provide power
supply, single-port power supply up to 15.4 / 30W.
Power Supply Distance Extension
The power supply distance of standard CAT 5E and CAT 6E cable is up
100m
to 100m. It can supply power for the PD remotely, which expands the
range of PoE applications, improves wiring eciency, and better for
project installation works.
Extreme Speed Transmission
10/100/1000Mbps self-adaptive RJ45 port, extreme speed and high
ecient data transmission, support link-speed forwarding and MDI /
MDIX auto-flip function, plug and play.
02
PoE30G-AT
Accessory Products
Page 4
Application
Connect to IP camera
PoE&Data
Data
TEG1024G
Connect to power suooly
03
PoE30G-AT
Accessory Products
Page 5
Product Model
PoE30G-AT
Hardware Features
IEEE802.3、 IEEE802.3u 、IEEE802.3ab、IEEE802.3af、 IEEE802.3atStandards&Protocols
Indicators Link/Act , PoE Status
Interfaces
Input Voltage
Ouput Voltage
Power consumption Power Supply：30W (max)
PoE Supply
1 10/100/1000Mbps RJ45 Port(Data/PoE)
1 10/100/1000Mbps RJ45 Port(Data)
AC：100－240V～ 50/60Hz
DC：51V/0.8A(max)
PoE Port supports standard IEEE802.3at/af power( maximum
power for PoE port is 30W)，PoE power type is mid-span( 45+, 78- line pair)
Dimensions (W × D × H)
Environment
Certification
132.3mm*60mm*33mm
Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
FCC、CE 、RoHS、UL
04
PoE30G-AT
Accessory Products
Page 6
www.tendacn.com/en/
Tenda Technology Bldg.Int’ IE-City,
#1001 Zhong Shan Yuan Rd.,Nanshan District,Shenzhen China.
E-mail:support@tenda.com.cn
Tel:+86-755-2765 7098
Fax:+86-755-2765 7178
PC:518055
Specifications are subject to change without notice.Copyright ©2017 SHENZHEN TENDA TECHNOLOGY CO.,LTD. All rights reserved. Tenda is the trademark of SHENZHEN TENDA TECHNOLOGY CO.,LTD.
All other brand names mentioned herein are the trademark or registered trademarks of their respective holders.
Loading...