Tenda O2 User Manual

O2
2km Point to Point Outdoor CPE
http://www.tendacn.com
O2
2km Point to Point Outdoor CPE
Products Description
O2 5GHz Long Range Outdoor CPE is designed to WISP CPE solutions and long distance wireless network solutions for video surveillance and data transmission. It features with 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network. Adopt of auto-bridging technology,two CPE can connect to each other automatically to make it easy to setup.
Key Features
* 5GHz 11n 300Mbps * 12dbi directional antenna * IP65 waterproof enclosure
01
* 6000V Lightning Protection * AP, Station, WISP operating mode supported * Up to 60 meters of flexible deployment with included PoE Injector
O2 / 2km Point to Point Outdoor CPE
Product Features
2km+ transmission Range
O2 adopts of independent power amplifier and 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 2km.
Auto-bridge For Two Device
O2 adopts of auto-bridge technology,two cpe can connect to each other when you power on them face to face. It is very easy to setup for CCTV surveillance and data.
Smart Signal Indicator LED
3 signal LED Lights represent the currently signal strength that O2 receives from peer device.It is helpful to find the right location to deploy the device and achieve a better performance.
Multiple Application Scenarios
Long-Distance Wireless Connection
One work as AP mode and another work as Station mode to create a long distance wrieless connecton for video surveillance and data transmission.
WISP(Client+Router) Mode
Wirelessly connect to WISP station/hotspot to share Internet to local wireless and wired network.
Professional Outdoor Design
Equipped with IP64 waterproof enclouse and high quality hardware design, O2 can work in various weather conditions, such as sunshine, rainfall or extremely low/high temperature environment
Easy to Setup and Manage
O2 comes with a centralized management software that helps users easily to manage all the devices in the network from a single PC-CPE Assistant.
02
O2 / 2km Point to Point Outdoor CPE
Specifications
Product Information
Model O2
Dimensions 193.5*80*67.5mm
Deployment Pole Mount
Application Scenarios WISP CPE, Data transmission and Long range video surveillance
Hardware Features
Frequency Range 5GHz
Compliant Standards IEEE 802.11a/n
Private TDMA Protocol TD-MAX
Maximum Wireless Rate 300Mbps
Interfaces 1*10/100Mbps Ethernet Port
Antennas Gain 12dbi
Antenna Beamwidth Horizontal: 30° Vertical: 30°
Reset Button 1
DC Jack 1
Power Consumption 6.3W
Waterproof Level IP65
LED indicator PoE/LAN, WiFi LED1, LED2, LED3
Power Method 12V1A Passive PoE or DC Adapter
Lightning Protection 6000V
Passive PoE
Lightning Protection
Passive power over ethenet via PoE/LAN (+4,5pins; -7,8pins) Voltage range: 11-13.8V DC
MCS0: -96dbm
MCS7: -72dbm
Software Features
Operating mode AP/Station/WISP/P2MP/WDS Repeater/Router
Enable/Disable Wireless Radio Support
SSID Hidden Support
Wireless Client isolation Support
SSID Isolation Support
Channel Bandwidth 10/20/30/40MHz
Client Limitation For SSID 10/20/30/40MHz
Wireless Access Control 10/20/30/40MHz
Transmission Power Adjustable power by 1dBm
03
O2 / 2km Point to Point Outdoor CPE
WMM Capable Support
APSD Capable Support
Wireless Security 64/128 WEP, WPA-PSK, WPA2-PSK, WPA&WPA2-PSK, WPA, WPA2
Transparent Bridge Support
VLAN Tagging for SSID Support
DHCP Server Support
VPN Pass-Through PPTP, L2TP
Remote Web access Support
Schedule Reboot Support
Page Timeout Support
Ping Watchdog Support
Dyndns Support
Dyndns noip, dyndns.org
Network Diagnoses Ping, Traceroute, Signal Scan
Time&Date Setting Support
Firmware upgrade Support
Backup/Restore Conguration Support
Username Managerment Support
System Log Support
Managed By Controller PC Software -CPE Assistant
Others
1*2km Point to Point Outdoor CPE 1*Power Adapter
Managed By Controller
Operating Temperature -30 ~ 60
Storage Temperature -40 ~ 70
Operating Humidity 10%~90% non-condensing
Storage Humidity 10%~90% non-condensing
1*PoE Injector 2*Plastic Staps 1*Quick Installation Guide
Default login IP 192.168.2.1
Default Login Username admin
Default Login Password admin
Certications FCC/CE/RoHS
04
O2 / 2km Point to Point Outdoor CPE
Tenda Technology Bldg.Int’ IE-City,
#1001 Zhong Shan Yuan Rd.,Nanshan District,Shenzhen China.
E-mail:support@tenda.com.cn Tel:+86-755-2765 7098 Fax:+86-755-2765 7178 PC:518055
Specifications are subject to change without notice.Copyright ©2017 SHENZHEN TENDA TECHNOLOGY CO.,LTD. All rights reserved. Tenda is the trademark of SHENZHEN TENDA TECHNOLOGY CO.,LTD. All other brand names mentioned herein are the trademark or registered trademarks of their respective holders.
Loading...