Tenda Multifunctional Broadband Router User Manual
Multifunctional Broadband Router User Guide
Copyright Statement
is the registered trademark of Shenzhen Tenda
Technology Co., Ltd. Other trademark or trade name
mentioned herein are the trademark or registered trademark
of above company. Copyright of the whole product as
integration, including its accessories and software, belongs to
Shenzhen Tenda Technology Co., Ltd. Without the permission
of Shenzhen Tenda Technology Co., Ltd, individual or party is
not allowed to copy, plagiarize, imitate or translate it into other
languages.
All the photos and product specifications mentioned in this
manual are for references only, as the upgrading of software
and hardware, there will be changes. And if there are changes,
Tenda is not responsible for informing in advance. If you want
to know more about our products information, please access
our website at www.tenda.cn
Multifunctional Broadband Router User Guide
Contents
Contents................................................................................1
1.1 Hardware Installation ............................................................ 1
1.2 LED Indicators on Rear Panel .............................................. 2
1.3 Topology................................................................................. 2
Chapter Two Configuration Guide ......................................3
2.1 To configure the network on your PC correctly.................. 3
2.2 To check the connection....................................................... 5
2.3 Log in the Router................................................................... 6
2.4 Get to Know the Management Interface .............................. 7
2.5 Quick Installation Guide........................................................ 8
2.6 Status.................................................................................... 11
2.7 Wizard................................................................................... 11
2.8 Advanced Config ................................................................. 12
2.9 DHCP Server ........................................................................ 16
2.10 Virtual Server ..................................................................... 17
2.11 Security Setting ................................................................. 21
2.12 Routing Setting.................................................................. 28
2.13 System Tool ....................................................................... 29
Package Contents ..................................................................... 34
Physical Environment ............................................................... 34
Multifunctional Broadband Router User Guide
Chapter One Hardware Installation
Rear Panel Port Details
4 10/100M LAN
Ports
Connect to 10/100Base-T Ethernet LAN Cards
or Uplink to Switch/Hub
RESET
Warning! When you press “RESET” up to 7
seconds, your configuration will be lost and the
router restores to factory default settings.
WAN Connect to XDSL/Cable Modem/Ethernet
AC9V AC 9V power Interface
1.1 Hardware Installation
1、Pleases use cable to connect LAN port of router with LAN adapter
of your PC or you can also connect the LAN port with switches or
Hubs in LAN
2、Please connect WAN port of router to internet with Cat. 5 cable
3、Please power on the router with specified adapter
1
Multifunctional Broadband Router User Guide
1.2 LED Indicators on Rear Panel
LED Indicators Details
POWER Indicates the status of the Power
SYS Blinking Indicates the device’s system goes well.
WAN Blinking
Indicates the WAN port is transmitting or
receiving data.
Always
ON
Indicates corresponding LAN port is connected
correctly.
LAN
(1/2/3
/4)
Blinking
Indicates the corresponding LAN port is
transmitting or receiving data.
1.3 Topology
Take 4-port broadband router as example. If you purchased 7/16-port
router, the LAN network can be established as the following topology.
2
Multifunctional Broadband Router User Guide
Chapter Two Configuration Guide
2.1 To configure the network on your PC correctly
1. Please click “My Network
Places” on your desktop and
select “Properties”.
2. Please right-click “Local
Area Connection” and select
“Properties”.
3. Please select “ Internet
Protocol(TCP/IP)” and click
“Properties”.
3
Multifunctional Broadband Router User Guide
4. On this page, there are two
options for IP settings : “Obtain
an IP address
automatically(O)” and “Use the
following IP address(S)”
A： If you select “Obtain an IP
address automatically(O)”,
please refer to the figure on the
right.
B：If you select “Use the
following IP address(S)”, you
have to input below
parameters respectively:
IP address:192.168.0.XXX
(XXX is among 2~254)
Subnet Mask: 255.255.255.0
Default gateway: 192.168.0.1
Also there are two ways for
DNS settings, Please select
“Use the following DNS server
addresses”.
Preferred DNS Server: Please
input the DNS server address
provided by ISP. Please
contact your ISP for this
information if you are not clear.
Alternate DNS Server: If you
have a secondary DNS Server
4
Multifunctional Broadband Router User Guide
address, please fill in this
blank.
After finishing above settings,
please click “OK” to submit
configuration, and click “OK” in
“Local Area connection” to
save configuration.
2.2 To check the connection
1.Click”Start------Program-----
Accessories----Command
Prompt”, you will see below
dialogue box.
2、Please input command
“Ping 192.168.0.1” and then
press “Enter”, If the screen
displays as the right Figure, it
shows your PC and router
have been connected
normally. Otherwise, please
check whether your router is
powered on or whether the
cable between your PC and
router is normally connected.
5
Multifunctional Broadband Router User Guide
2.3 Log in the Router
1. Please open IE and enter
“
http://192.168.0.1” in the
address bar, then press “Enter”
2. Then right Figure will appear to
require User name and
Password, please enter as per
below factory default:
User Name: admin
Password: admin
Then click “OK”.
In order to have a faster access
to your router’s management
interface, please select
“Remember my password”
3. If the User name and
Password are correct, IE will
enter into administrator’s
interface as right Figure.
6
Multifunctional Broadband Router User Guide
2.4 Get to Know the Management Interface
1、After entering into the
configuration Interface, you will
see 9 function menus on the
left ,including: Status, Wizard,
Advanced Config, DHCP
Server, Virtual Server, Security
Setting, Routing Setting,
System Tool, Logout. Press the
separate button, you can
configure the function settings
respectively.
2、When selecting each Menu,
there will be a detailed setting
Figure appearing on the right
where you can configure in
details for each Menu.
7
Multifunctional Broadband Router User Guide
2.5 Quick Installation Guide
1、Click “Next” when you enter in
the “Welcome” interface.
2、Please select your Access
mode when you enter into
Wizard interface.
This Router supports 4 kinds of
Access modes:
Factory default Access mode is
“Dynamic IP”
A. If you select “ADSL Virtual
Dial-up(PPPoE)”, just enter the
User Name and Password,
provided by the ISP, into the
“Wizard ADSL” dialogue box.
For example, your ISP provided
you below User name and
password:
User name snake27653
089@163.gd
Password 123snake
Then you have to fill in above
parameters as the figure on the
right.
8
Multifunctional Broadband Router User Guide
B. If you select “Ethernet
Broadband, automatically obtain
an IP from ISP (dynamic IP)”.
Please click “Save”.
C. If you select “Ethernet
Broadband, fixed IP provided by
ISP (fixed IP)”，figure on the right
will appear, you have to enter IP
address, Subnet-mask,
Gateway, DNS Server address
and Secondary DNS if available.
For example, your ISP provided
you below information:
IP
Address:
192.168.111.73
Subnet
-mask:
255.255.255.0
Gateway: 192.168.111.1
DNS
Server:
202.96.134.133
Secondary
DNS:
192.168.111.1
Then you have to fill in above
parameters as right Figure.
D. If you select “PPP Tunneling
Protocol (Can support
multi-protocol Virtual Private
Networks)(VPN)(PPTP).
PPTP Server: Including Domain
name and IP Address. You only
9
Loading...