Page 1
TEG1118P-16-250W
16GE+2SFP Ethernet Switch With 16-Port PoE
www.tendacn.com
Page 2
TEG1118P-16-250W
16GE+2SFP Ethernet Switch With 16-Port PoE
Products Description
TEG1118P-16-250W is a unmanaged PoE switch independently designed by Tenda. Compliant with IEEE 802.3af and
IEEE 802.3at standards, it can identify PoE-powered devices intelligently. With a maximum PoE power output of 230W, and
30W for a single port, it can supply power when transmitting data with APs, IP cameras, and IP phones. The switch
supports 4 working modes, including standard, priority, extend and VLAN modes, is an ideal choice for SMBs, hotels,
schools, factories with video surveillance and wireless networking requirements.
01 16GE+2SFP Ethernet Switch With 16-Port PoE
Page 3
Key Feature
Product Features
Compliant with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x and
IEEE802.3af/at standards.
16 * 100/1000 Mbps Base-T RJ45 ports for data transmission and power supply,
2* 1000 Mbps Base-X SFP slot.
8 K MAC address table and MAC address auto-learning.
IEEE 802.3x-compliant full-duplex flow control and half-duplex backpressure flow control.
36 Gbps backplane bandwidth.
Maximum power consumption of a single port: 30W; Maximum power consumption of the
switch: 250W.
4 modes: standard, priority, extend and VLAN.
6KV
AF / AT
6 kV lightning protection
The switch offers various safety and protection types, including 6 kV lightening protection,
PSE short-circuit protection, PoE overload protection, surge current protection etc.
Gigabit uplink port
With two 1000 Mbps SFP slot, the switch can meet the current demand for uplink
bandwidth of Gigabit WLAN and HD digital surveillance.
230 W PoE power supply
The switch features 16 IEEE 802.3at/af-compliant RJ45 ports. The entire switch offers a
maximum PoE power output of 230 W, and 30 W for a single port, to supply power to and
data transmission with 16 PoE-powered devices such as APs and IP cameras.
One-Key to switch 4 modes
It supports 4 working modes, including standard, priority, extend and VLAN modes. The
hardware DIP mode switch makes networking straightforward and effortless.
02 16GE+2SFP Ethernet Switch With 16-Port PoE
Page 4
Application
TEG3328F
M3
TEG1118P-16-250W
Conference Room
I21 I21
Restaurant Restaurant
Conference Room
Conference Room
Restaurant
Core switch
TEG1024F TEG1024F TEG1024F
TEG1118P-16-250W TEG1118P-16-250W TEG1118P-16-250W TEG1118P-16-250W TEG1118P-16-250W TEG1118P-16-250W
AC/NVR
03 16GE+2SFP Ethernet Switch With 16-Port PoE
Page 5
Product specifications
Product Model TEG1118P-16-250W
Specifications
Standards IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af/at
16 * Link/Act LEDs
2 * SFP LED
LEDs indicator
1 * PoE-MAX LED
1 * Power LED
Interfaces
Forwarding Rates
Switching capacity
MAC Address Table
Lightning protection
Input voltage
PoE supply
Power consumption 250W output the whole device
Dimensions 440*178.8*44mm
Four Modes
16 * 100/1000 Mbps Base-T RJ45 ports (Data/Power)
2* 1000 Mbps Base-X SFP port
26.8 Mpps
36 Gbps
8K
≥6KV
AC: 100-240V~50/60Hz
Ports 1-16 support standard IEEE802.3af/at
30W output per PoE port
230W output of the total PoE Power
Standard: Default mode of the switch. In this mode, it works as an unmanaged switch;
all ports can communicate with each other separately.
Priority: In this mode, port15,16,SFP1,SFP2 serve as uplink ports, ports 1 – 8 serve as
high priority port. All ports can communicate with each other separately.
Extend: In this mode, data rate of ports 9 - 14 reduces to 10 Mbps, the maximum
transmission distance can be 250 meters, and all ports can communicate with each other.
VLAN: In this mode, ports 1 - 14 of the switch can communicate with port 14,15,SFP1,SFP2
separately, but cannot communicate with each other.
You can enable this mode to reduce broadcast storm and isolate DHCP broadcast.
Operating Temperature: 0℃~45℃ (32℉~113℉)
Environment
Certifications FCC、CE、RoHS
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
04 16GE+2SFP Ethernet Switch With 16-Port PoE
Page 6
Tenda Technology Bldg.Int’ IE-City,
#1001 Zhong Shan Yuan Rd.,Nanshan District,Shenzhen China.
E-mail:support@tenda.com.cn
Tel:+86-755-2765 7098
Fax:+86-755-2765 7178
PC:518055
16GE+2SFP Ethernet Switch With 16-Port PoE
05
Specifications are subject to change without notice.Copyright ©2020 SHENZHEN TENDA TECHNOLOGY CO.,LTD. All rights reserved. Tenda is the trademark of SHENZHEN TENDA TECHNOLOGY CO.,LTD.
All other brand names mentioned herein are the trademark or registered trademarks of their respective holders.
Loading...