Page 1
TEF1118P-16-150W
16 10/100Mbps +1 Gigabit/SFP Slots Switch With 16-Port PoE
www.tenda.com.cn
Page 2
TEF1118P-16-150W
16 10/100Mbps +1 Gigabit/SFP Slots Switch With 16-Port PoE
Products Description
TEF1118P-16-150W is a Tenda PoE switch that offers 16 10/100 Mbps Base-TX RJ45 ports, 1 10/100/1000 Mbps Base-T RJ45 ports, and 1
1000 Mbps Base-X SFP port. Ports 1-16 comply with the IEEE 802.3af standard (maximum PoE power output: 15.4 W) and 802.3at
standard (maximum PoE power output: 30 W). The switch offers a maximum PoE power output of 135 W and can supply power to and
exchange data with APs, IP cameras, and IP phones through CAT5 cables. It also provides simple management modes such as CCTV,
VLAN, and Extend to help reduce cabling costs of IP terminals like APs and IP cameras.
Key Feature
16 10/100 Mbps Base-TX RJ45 port; 1 10/100/1000 Mbps Base-T RJ45 port; 1 100/1000Base-X SFP port.
Ports 1-16: IEEE 802.3af/at PoE ports; maximum power output of each PoE port: 30 W; maximum power output of the
switch: 135 W.
13-inch desktop size, 1U height, rack mountable.
Hardware DIP switch for selection among the CCTV, Standard, VLAN, and Extend modes. The Extend mode features 1-8
port transmission distance of up to 250m at 10 Mbps.Hardware DIP switch to isolate ports to prevent broadcast storm
and defend against DHCP spoofing.
01
Gigabit Uplink Unmanaged PoE Switch
Page 3
Lightning Protection 6kV
The ports and embedded power can provide lightning protection of up to 6kV. It also provides PSE shortcircuiting
protection, PoE overloading, power over temperature, over voltage and surge current protection.
135 W PoE power supply
Ports 1-16 comply with the IEEE802.3af and IEEE802.3at power supply standards. The entire switch offers a maximum
PoE power output of 135 W, whereas each port offers a maximum PoE power output of 30 W. The ports can be used to
supply power to and exchange data with APs and IP cameras.
CCTV、Standard, VLAN and Extend Operation Modes Offered
CCTV: 1-8 ports support QoS，If multiple IP cameras are connected to the switch, you are recommended to
enable this mode and connect the G1 or SFP1 port of this switch to the upstream device to which the monitoring
computer connects. This ensures smoother monitoring video playback.
Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communi-
cate with each other.
VLAN: In this mode,1-16 portsof the switch cannot communicate with each other, but can communicate with the
G1 and SFP1 ports.Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing。
Extend: In this mode, the data rate of 1-8 port of the switch is limited to 10 Mbps, whereas the maximum trans-
mission distance of the port is increased to 250 meters. All the ports of the switch can communicate with each
other.
02
Gigabit Uplink Unmanaged PoE Switch
Page 4
Application
TEG5228T
TEF1118P-16-150W
AC2000
Conference Room
AP355 AP355
restaurant restaurant restaurant
Conference Room Conference Room
Gateway
TEG3224T TEG3224T TEG3224T
TEF1118P-16-150W TEF1118P-16-150W TEF1118P-16-150W TEF1118P-16-150W TEF1118P-16-150W TEF1118P-16-150W
Management Server
03
Gigabit Uplink Unmanaged PoE Switch
Page 5
Product Model
TEF1118P-16-150W v1.0
Hardware Features
Standards&Protocols
Switching capacity
Throughput
Dimensions (W × D × H)
RAM Data Buffer
Interfaces
Port lightning protection
Wire-speed forwarding
Capacity
PoE Supply
Input Voltage AC：100-240V～ 50/60Hz
Power consumption
Forwarding mode
Mac Address Table
IEEE 802.3、IEEE 802.3u、IEEE 802.3ab、IEEE 802.3x、
IEEE 802.3af、IEEE 802.3at
7.2 Gbps
5.36Mpps
294*178*44mm
2.75Mb
16 10/100Mbps RJ45 Ports(Data/PoE)
1 10/100/1000Mbps RJ45 Ports(Data)
1 100/1000Mbps SFP Slot(Data)
(Auto Negotiation/Auto MDI/MDIX)
≥6KV
Support
Store-forward and cut-through
4K
Port 1 to Port 16 support standard IEEE802.3at/af
power( maximum power for each port is 30W)，
PoE power type is end-span(12+, 36- and 45+, 78- line pair)
in full configuration：<135W
Power Supply：150W
Operating Temperature: 0℃~40℃ (32℉~104℉)
Environment
CCTV、Standard, VLAN
and Extend Operation
Modes Offered
Certification FCC、CE、RoHS
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
CCTV: 1-8 ports support QoS，If multiple IP cameras are connected to the switch, you are recommended to enable this mode
and connect the G1 or SFP1 port of this switch to the upstream device to which the monitoring computer connects. This
ensures smoother monitoring video playback.
Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each
other.
VLAN: In this mode,1-16 portsof the switch cannot communicate with each other, but can communicate with the G1 and SFP1
ports.Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing。
Extend: In this mode, the data rate of 1-8 port of the switch is limited to 10 Mbps, whereas the maximum transmission distance
of the port is increased to 250 meters. All the ports of the switch can communicate with each other.
Tenda Technology Bldg.Int’ IE-City,
#1001 Zhong Shan Yuan Rd.,Nanshan District,Shenzhen China.
E-mail:tenda@tenda.com.cn
Tel:0755-2765 7098
Fax:0755-2765 7178
PC:518055
04
Specifications are subject to change without notice.Copyright ©2015 SHENZHEN TENDA TECHNOLOGY CO.,LTD. All rights reserved. Tenda is the trademark of SHENZHEN TENDA TECHNOLOGY CO.,LTD. All other brand
names mentioned herein are the trademark or registered trademarks of their respective holders.
Gigabit Uplink Unmanaged PoE Switch
Loading...