Tenda G1008D operation manual
Copyright Statement
is the registered trademark of Shenzhen
Tenda Technology Co., Ltd. All the products and product names
mentioned herein are the trademarks or registered trademarks
of their respective holders. Copyright of the whole product as
integration, including its accessories and software, belongs to
Shenzhen Tenda Technology Co., Ltd. Without the permission of
Shenzhen Tenda Technology Co., Ltd, any individual or party is
not allowed to copy, plagiarize, imitate or translate it into other
languages.
All the photos and product specifications mentioned in this guide
are for references only. As the upgrade of software and
hardware, there will be changes. And if there are changes,
Tenda is not responsible for informing in advance. If you want to
know more about our product information, please visit our
website at www.tenda.cn.
Content
1. Introduction------------------------------------------------1
1.1 Switch Features --------------------------------------------1
1.2 Package Contents -----------------------------------------2
1.3 Front Panel and Rear Panel Specifications--------------2
1.4 LED Indicator Specifications------------------------------3
2. Installation ------------------------------------------------- 5
2.1 Before Connecting to the Network ----------------------5
2.2 Connecting to End Nodes--------------------------------5
2.3 Switch to Router or Switch --------------------------------6
3. Product Specification --------------------------------------7
1. Introduction
The G1005D/G1008D 5/8-Port Desktop Gigabit Ethernet Switch,
mini and exquisite, is especially suitable for small-sized
networking. It provides 5/8 10/100/1000Mbps Auto-negotiation
ports and supports Auto MDI/MDIX. These Gigabit ports can be
used not only as ordinary ports, but as Uplink ports connected to
other networking devices. You can replace the 10/100Mbps
switch with the G1005D/G1008D to resolve the bottleneck
issues of server terminal connectivity, because the speed at each
port can be up to 2000Mbps in full-duplex mode. It’s the best
choice for you to upgrade from the normal 10/100Mbps to
1000Mbps. Moreover, its easy setup and no network
management will benefit you a lot. So you can select this Gigabit
Switch as a prime switch to improve the speed between different
departments and servers.
1.1 Switch Features
Complies with IEEE802.3, IEEE802.3u and
IEEE802.3ab Ethernet standards
Supports Auto MDI/MDIX on each port
Supports NWAY Auto-Negotiation function
Provides 5/8 10/100/1000Mbps Auto-Negotiation
RJ-45 ports
1
Loading...