Tenda F357 User Manual
Wireless N301 Easy Setup Router
Wireless N301 Easy Setup Router
Copyright Statement
is the registered trademark of Shenzhen Tenda
Technology Co., Ltd. All the products and product names mentioned
herein are the trademarks or registered trademarks of their
respective holders. Copyright of the whole product as integration,
including its accessories and software, belongs to Shenzhen Tenda
Technology Co., Ltd. Without prior expressed written permission
from Shenzhen Tenda Technology Co., Ltd, any individual or party is
not allowed to copy, plagiarize, reproduce, or translate it into other
languages.
All photos and product specifications mentioned in this manual are
for references only. Upgrades of software and hardware may occur;
Tenda reserves the right to revise this publication and to make
changes in the content hereof without obligation to notify any
person or organization of such revisions or changes. If you would
like to know more about our product information, please visit our
website at http://www.tendacn.com.
Wireless N301 Easy Setup Router
Contents
COPYRIGHT STATEMENT .......................................................................................................... 1
CONTENTS ............................................................................................................................... 3
CHAPTER 1 PRODUCT OVERVIEW ............................................................................................ 1
1 PACKAGE CONTENTS ..................................................................................................................1
2 LEDS AND PORTS ......................................................................................................................1
CHAPTER 2 QUICK INTERNET SETUP ........................................................................................ 3
1 PREPARATION ...........................................................................................................................3
2 PHYSICAL INSTALLATION ..............................................................................................................4
3 INTERNET CONNECTION SETUP .....................................................................................................5
3.1 Log in to Web Manager ......................................................... 5
3.2 Internet Connection Setup ..................................................... 7
4 VERIFY INTERNET CONNECTION SETTINGS .......................................................................................9
5 CONNECT TO DEVICE WIRELESSLY ...............................................................................................12
WIN7 Operation ................................................................... 12
Windows XP Operation ............................................................. 18
CHAPTER 3 ADVANCED SETTINGS .......................................................................................... 21
1 ADVANCED ............................................................................................................................21
1.1 Status ....................................................................... 21
1.2 Internet Connection Setup .................................................... 21
1.3 MAC Clone .................................................................... 28
1.4 WAN Speed .................................................................... 29
1.5 LAN Settings ................................................................. 29
1.6 DNS Settings ................................................................. 30
1.7 DHCP Server .................................................................. 30
1.8 DHCP Client List ............................................................. 31
2 WIRELESS SETTINGS .................................................................................................................33
2.1 Wireless Basic Settings ...................................................... 33
2.2 Wireless Security ............................................................ 33
2.3 Wireless Extender ............................................................ 37
2.4 Wireless Access Control ...................................................... 49
2.5 Wireless Client .............................................................. 50
3 BANDWIDTH CONTROL ............................................................................................................. 51
3.1 Bandwidth Control ............................................................ 51
3.2 Traffic Statistics ........................................................... 52
4 SPECIAL APPLICATIONS .............................................................................................................54
4.1 Port Range Forwarding ........................................................ 54
4.2 DMZ Host ..................................................................... 56
4.3 DDNS ......................................................................... 57
4.4 UPNP ......................................................................... 59
4.5 Static Routing ............................................................... 59
4.6 Routing Table ................................................................ 60
Wireless N301 Easy Setup Router
5 SECURITY ............................................................................................................................... 62
5.1 URL Filter ................................................................... 62
5.2 MAC Filter ................................................................... 63
5.3 Client Filter ............................................................... 65
6 TOOLS ...................................................................................................................................68
6.1 Reboot ....................................................................... 68
6.2 Restore to Factory Default Settings .......................................... 68
6.3 Backup/Restore ............................................................... 68
6.4 Syslog ....................................................................... 70
6.5 Remote Web Management ........................................................ 70
6.6 Time ......................................................................... 71
6.7 Login Password ............................................................... 72
6.8 Firmware Upgrade ............................................................. 73
APPENDIX 1 GLOSSARY .......................................................................................................... 74
APPENDIX 2 VERIFY THE WDS CONNECTION .......................................................................... 79
APPENDIX 3 FAQS .................................................................................................................. 83
APPENDIX 4 REMOVE WIRELESS NETWORK FROM YOUR PC ............................................... 86
APPENDIX 5 SAFETY AND EMISSION STATEMENT ................................................................... 89
Wireless N301 Easy Setup Router
.
1
Chapter 1 Product Overview
1 Package Contents
Unpack the box and verify that the package contains the following:
Wireless Broadband Router
Power Adapter
Quick Install Guide
If any of the above items is incorrect, missing, or damaged, please contact
your Tenda reseller for immediate replacement.
2 LEDs and Ports
This part describes this device’s hardware features. The topics include:
1) Wireless Router’s front and back panels 2) LED designations
Front Panel
Front LED Overview:
LED
Status
Description
SYS
Blinking
Indicates system is functioning properly
WLAN
Solid
Wireless is enabled
Blinking
Transferring data
1/2/3
Solid
LAN port connected correctly
Blinking
LAN port is transferring data
Wireless N301 Easy Setup Router
.
2
WAN
Solid
WAN port connected correctly
Blinking
WAN port is transferring data
Back Panel
Back Overview:
Port
Function Description
WAN
Usually for connecting DSL MODEM、CABLE MODEM、ISP
to the Internet.
1/2/3
Usually for connecting computers, switches .etc.
WPS/ RST
When you press this button for 7 seconds, files set by the
router will be deleted and restored to default factory; for 1
second, WPS will be enabled and the WPS LED will be
blinking accordingly.
PWR
The power adapter is connected and you can use the
provided adapter to supply power.
Wireless N301 Easy Setup Router
.
3
Chapter 2 Quick Internet Setup
1 Preparation
Before connecting network lines, please verify the following items:
Item
Description
Wireless Router
Used with the provided power supply
PC
Installed with IE8 or other better web browsers.
Ethenet Cable
Used for linking the PC to the router
Broadband
Service
Provided by ISP
Internet
Connection
Setup
If you connect to the Internet using a broadband
connection that requires a username and a password
provided by your ISP, please select PPPoE;
If your ISP provides all the needed information: IP
address, subnet mask, gateway address, and DNS
address(es), please select Static IP;
If you can access Internet as soon as your computer
directly connects to an Internet-enabled ADSL/Cable
modem, please select DHCP;
If your ISP uses a PPTP connection, please select PPTP;
If your ISP uses an L2TP connection, please select L2TP;
PPPoE Dual Access (only supported in special Area
e.g.Russia.).
Wireless N301 Easy Setup Router
.
4
2 Physical installation
1. Connect one end of the included power adapter to the device and plug the
other end into a wall outlet nearby.(Using a power adapter with a different
voltage rating than the one included with the device will cause damage to
the device)
2. Connect one of the LAN ports on the Device to the NIC port on your PC
using an Ethernet cable.
3. Connect the Ethernet cable from Internet side to the WAN port on the
device. If it is connected to the telephone line, please link the telephone
line to the MODEM and connect the MODEM to the WAN port on the
device.
Wireless N301 Easy Setup Router
.
5
4. When connected, log in to Web manager to set up Internet connection.
3 Internet Connection Setup
3.1 Log in to Web Manager
1. Launch a web browser, such as IE Web browser;
2. In the address bar, input 192.168.0.1 and press Enter;
3. Enter admin in the password field on the appearing login window and then
click OK.
Wireless N301 Easy Setup Router
.
6
4. Now you may access the device’s home page for quickly setting up Internet
connection and wireless security.
5. If you fail to log in to it, please refer to Appendix 3 FAQs.
Wireless N301 Easy Setup Router
.
7
3.2 Internet Connection Setup
Common Internet connection types are available on the home page:
PPPoE and DHCP.
DHCP
Select DHCP (Dynamic IP) if you can access Internet as soon as your
computer directly connects to an Internet-enabled ADSL/Cable
modem; configure a security key (8-63 characters) to secure your
wireless network and then click OK.
PPPoE
Select PPPoE (Point to Point Protocol over Ethernet) if you used to
connect to the Internet using a broadband connection that requires
a username and a password. Enter the user name and password
provided by your ISP; configure a security key to secure your
wireless network and then click OK.
Wireless N301 Easy Setup Router
.
8
Note:
1. DHCP is the default Internet connection type;
2. If you are not sure about your PPPoE username and password,
contact your Internet service provider (ISP) for help. For other
Internet connection types, please go to section 1.2: Internet
Connection Setup.
Wireless N301 Easy Setup Router
.
9
4 Verify Internet Connection Settings
System automatically skips to the status page when you finish all
needed settings on the home page. Here you can see the system
status and WAN connection status of the device.
1. If you find "Connected" and a WAN IP address displayed there (as
shown below), you have got a wired internet access now.
2. If connection status displays "Disconnected" and there is no WAN
IP address displayed (as seen below), connection between the
Internet-enabled modem and your device may have failed. Please
double check or re-connect all involved devices and cables
properly and then refresh the page. If nothing is wrong,
"Connecting" or "Connected" will be displayed.
Wireless N301 Easy Setup Router
.
10
3. If "Connecting" is displayed and no WAN IP address is seen, try
refreshing the page five times. And if it still displays "Connecting"
try steps below:
1). Contact your ISP for assistance if you are using the DHCP
connection type.
2). Read the connection diagnostic info on WAN status.
Note:
Below diagnostic info will be displayed on particular occasions for
your reference:
Wireless N301 Easy Setup Router
.
11
1). You have connected to Internet successfully.
2). You might have entered a wrong user name and/or a wrong
password. Please contact your ISP for the correct user name and
password and enter them again.
3). Ethernet cable is not connected or not properly connected to the
WAN port on the device. Please reconnect it properly.
4). No response is received from your ISP. Please verify that you can
access Internet when you directly connect your PC to an
Internet-enabled modem. If not, contact your local ISP for help.
Wireless N301 Easy Setup Router
.
12
5 Connect to Device Wirelessly
Having finished above settings, you can search the device's wireless
network (SSID) from your wireless devices (notebook, iPad, iPhone,
etc) and enter a security key to connect to it wirelessly.
WIN7 Operation
1. If you are using Windows 7 OS, do as follows:
1) Click Start and select Control Panel.
2) Click Network and Internet.
Wireless N301 Easy Setup Router
.
13
3) Click Network and Sharing Center.
4) Click Change adapter settings.
Wireless N301 Easy Setup Router
.
14
Wireless N301 Easy Setup Router
.
15
5) Select a desired wireless connection and click
Connect/Disconnect.
6) Select the wireless network you wish to connect and click
Connect.
Wireless N301 Easy Setup Router
.
16
7) Enter the security key and click OK.
8) You can access Internet via the device when "Connected" appears
next to the wireless network name you selected.
Wireless N301 Easy Setup Router
.
17
Wireless N301 Easy Setup Router
.
18
Windows XP Operation
2. If you are using Windows XP OS, do as follows:
1) Click Start and select Control Panel.
2) Click Network Connections.
Wireless N301 Easy Setup Router
.
19
3) Right click Wireless Network Connection and then select View
Available Wireless Networks.
4) Select the desired wireless network, click Connect, enter the
security key and then click OK.
Wireless N301 Easy Setup Router
.
20
5) You can access Internet via the device when "Connected" appears
next to the wireless network name you selected.
Wireless N301 Easy Setup Router
.
21
Chapter 3 Advanced Settings
1 Advanced
1.1 Status
Here you can see at a glance the operating status of the device. If
WAN port displays Disconnected, please refer to 3 Verify Internet
Connection Settings.
1.2 Internet Connection Setup
PPPoE
Select PPPoE (Point to Point Protocol over Ethernet) if you used to
connect to the Internet using a broadband connection that requires
Wireless N301 Easy Setup Router
.
22
a username and a password and enter the user name and password
provided by your ISP.
Static IP
Select Static IP if your ISP provides all the needed info. You will need
to enter the provided IP address, subnet mask, gateway address, and
DNS address(es) in corresponding fields.
Wireless N301 Easy Setup Router
.
23
1. Click Advanced.
2. Click Internet Connection Setup.
3. Internet connection Type: Select Static IP.
4. IP Address: Enter the IP address provided by your ISP. Consult
your ISP if you are not clear.Consult your ISP if you are not clear.
5. Subnet mask: Enter the subnet mask provided by your ISP.
6. Gateway: Enter the WAN Gateway provided by your ISP.
7. DNS Server: Enter the DNS address provided by your ISP.
8. OK: Click it to save all your settings.
DHCP
Select DHCP (Dynamic IP) if you can access Internet as soon as your
computer directly connects to an Internet-enabled ADSL/Cable
modem.
Wireless N301 Easy Setup Router
.
24
1. Internet connection Type: Select DHCP.
2. MTU: Maximum Transmission Unit. DO NOT change it from the
factory default of 1500 unless instructed by your ISP. You may
need to change it for optimal performance with some specific
websites or application software that cannot be opened or
enabled; in this case, try 1450, 1400, etc.
3. OK: Click it to save your settings.
PPTP
Select PPTP (Point-to-Point-Tunneling Protocol) if your ISP uses a
PPTP connection. The PPTP allows you to connect a router to a VPN
server.
For example：
A corporate branch and headquarter can use this connection type to
implement mutual and secure access to each other’s resources.
Wireless N301 Easy Setup Router
.
25
1. Internet connection Type: Displays the current Internet
connection type.
2. PPTP Server Address: Enter the IP address of a PPTP server.
3. User Name: Enter your PPTP User Name.
4. Password: Enter the password.
5. MTU: Maximum Transmission Unit. DO NOT change it from the
factory default of 1492 unless instructed by your ISP. You may
need to change it for optimal performance with some specific
websites or application software that cannot be opened or
enabled; in this case, try 1450, 1400, etc.
6. Address Mode: Select "Dynamic" if you don’t get any IP info from
your ISP, otherwise select "Static". Consult your ISP if you are not
clear.
7. IP Address: Enter the IP address provided by your ISP. Consult
your ISP if you are not clear.
8. Subnet mask: Enter the subnet mask provided by your ISP.
9. Gateway: Enter the WAN Gateway provided by your ISP. Consult
your ISP if you are not clear.
Loading...