Wine Coolers
USER MANUAL
This manual contains important information including safety and
installation instructions of the appliances. Please read it carefully before
use and follow all safety information & instructions. It is recommended
to keep this manual for easy reference so that you can be familiar with the
operation of the appliance.
V1/2021
--CONTENTS--
01 ENERGY SAVING AND ECOLOGICAL PROTECTION
03 IMPORTANT SAFETY INFORMATION
06 Conformity
06 Energy Saving
06 Service
06 DESCRIPTION OF APPLIANCE AND INSTALLATION
06 PRESX30SB
07 PRESX38DB
08 PRESX60DB / PRESPROX60SRB
08 PRES180DB
09 ACCESSORY INSTALLATION BEFORE OPERATING
09 UNPACKING AND CLEANING THE WINE COOLER
09 Adjusting the height and levelling off your wine cabinet
10 Installing The Handle
10 LOCK & UNLOCK THE DOOR (FOR OPTION)
10 OPERATING THE WINE COOLER
10 WORKING CLIMATE
11 WINE STORAGE
12 CONTROL PANEL (Control In Cabinet)
12 POWER ON/OFF CONTROL
13 UNLOCKING THE CONTROL PANEL
13 INTERIOR LIGHTING ON/OFF CONTROL
13 TEMPERATURE DISPLAY WINDOW
13 TEMPERATURE SETTING
14 SELECTING FAHRENHEIT(ºF) & CELSIUS (ºC) DISPLAY
14 FUNCTION INDICATING LIGHT
14 CARE AND MAINTENANCE
14 CLEANING THE WINE COOLER
15 REMOVING THE SHELVES
15 Carbon Filter Change (Option)
16 Defrosting
16 Moving Your Wine Cooler
16 Power Failure
17 Vacation Time
17 Disconnecting From Power
18 TROUBLESHOOTING
19 REVERSE THE DOOR SWING
19 Undercounter Wine Cooler
24 PRES180DB
28 INSTALL REMOVABLE FRONT GRILLE
28 PRESX30SB / PREX60DB / PRESPROX60SRB
29 HOW TO FIND OTHER LANGUAGE USER MANUAL
INSTRUCTION MANUAL
Please removed all packaging, stickers and films from the products surface and clean the
product’s surfaces with a damp cloth and mild deturgent before using for the first time.
Let the appliance stand upright for approximately 24 hours before connecting it to the
•
power source, which helps to reduce the possibility of a cooling-system malfunction from
handling during transportation.
Before using your Wine Coolers, please carefully read this instruction manual
in order to maximize its performance. Store all documentation for subsequent
use or for other owners.This product is intended solely for household use or similar
applications such as:
--the kitchen area for personnel in shops, offices and other working environments
--on farms, by clientele of hotels, motels and other environments of a residential type
--at bed and breakfasts (B & B)
--for catering services and similar applications not for retail sale.
This appliance is intended to be used exclusively for the storage of wine or beverage,
any other use is considered dangerous and the manufacturer will not be responsible for
any omissions. Also, it is recommended that you take note of the warranty conditions.
ENERGY SAVING AND ECOLOGICAL PROTECTION
Please pay attention to the following special instructions for saving energy
and ecological protection:
(a) The most energy-saving configuration requires shelves to be
positioned in the appliance, please refer to the corresponding pictures in
the manual.
(b) Please follow all the instructions in this manual on where and how
to store wines in a the appliance for best preservation over the longest
period, to avoid food waste;
(c) Please follow all the instructions in this manual on the recommended
setting of temperatures in each compartment for optimum food
preservation.
(d) An estimation of the impact of temperature settings on food waste: for
the best storage time of wines, please consult your wine labels; the best
storage time may reduce under other un-recommended temperature
settings.
(e) The appliance has no special modes and features that can affect
temperatures.
(f) This appliance is intended to be used exclusively for the storage of
.01.
INSTRUCTION MANUAL
wine
(g) Please follow all the instructions in this manual for the correct
installation and end-user maintenance, including cleaning, of the
refrigerating appliance;
(h) FOR a free standing appliance: this refrigerating appliance is not
intended to be used as a built-in appliance.
(i) This refrigerating appliance is not suitable for freezing foodstuffs.
(j) Access to professional repair: https://service.temptech.no/
(k) Ordering spare parts: Please send emails to Service@temptech.no
(l) The minimum period during which spare parts, necessary for the repair
of the appliance, are available:
Thermostats, temperature sensors, printed circuit boards and light sources
are available for a minimum period of seven years after placing the last
unit of the model on the market.
Door handles, door hinges, trays and baskets for a minimum period of
seven years and door gaskets for a minimum period of 10 year, after
placing the last unit of the model on the market
(m) The minimum duration of the guarantee of the refrigerating appliance
offered by the manufacturer, importer or authorised representative:
Minimum guarantee is: 5 years for Norway, Sweden, Finland and Denmark.
(n) For appliances with climate class :
- Extended temperate: ‘this refrigerating appliance is intended to be used
at ambient temperatures ranging from 10 °C to 32 °C’;
- Temperate: ‘this refrigerating appliance is intended to be used at
ambient temperatures ranging from 16 °C to 32 °C’;
- Subtropical: ‘this refrigerating appliance is intended to be used at
ambient temperatures ranging from 16 °C to 38 °C’;
- Tropical: ‘this refrigerating appliance is intended to be used at ambient
temperatures ranging from 16 °C to 43 °C’;
(o) How to find the model information in the product database: Please
visit our website https://temptech.no/ to nd the instruction about how to
nd production information in EU database.
.02.
INSTRUCTION MANUAL
IMPORTANT SAFETY INFORMATION
This appliance uses ammable refrigerants and ammable insulation
blowing gases. Before using the appliance, please properly position
and install it as described in this manual. To avoid the risk of fire,
electrical shock, or injury when using the appliance, follow these basic
precautions:
● This appliance is for domestic purposes and is intended to be used
exclusively for the storage of sealed bottled wines.
● The appliance must be positioned so that the plug is accessible.
●Make sure the voltage/current marked on the rating label corresponds
with your supply voltage. Plug into a grounded 3-pin outlet, do not
remove grounding pin, do not use an adapter, and do not use an
extension cord.
● Do not connect or disconnect the electric plug with wet hands.
● To disconnect the appliance, grip the plug and pull it from the wall
outlet.
● Never pull out by the cord.
● It is recommended that a separate circuit, serving only your appliance
be provided.
● Unplug the appliance or disconnect power before cleaning,
maintenance or servicing. Failure to do so can result in electrical shock
or death.
● If the supply cord is damaged, it must be replaced by the manufacturer
or its service agent or a similarly qualified person in order to avoid a
hazard.
● The fuse (or circuit breaker) size should be 10 amps or higher.
● To ensure proper ventilation for the appliance, the front of the unit must
be completely unobstructed. Locate the unit away from direct sunlight
and sources of heat (stove, heater, radiator, etc.).
● Do not attempt to repair or replace any part of the appliance unless it
is specially recommended in this manual. All other servicing should be
referred to a qualied technician.
● Ensure enough peoples to move and install the appliance to avoid any
damage to the appliance or injury to the peoples.
● It is important for the appliance to be leveled in order to work properly.
You may adjust the appliance’s feet to level it.
● Never clean the appliance parts with flammable fluids which may
.03.
INSTRUCTION MANUAL
create a hazard or explosion. And do not store or use gasoline or other
ammable sprays and liquids in the vicinity of the appliance.
● Do not use solvent-based cleaning agents of abrasives on the interior.
These cleaners may damage or discolor the interior.
● Do not use this appliance for other than its intended purpose.
● Do not store explosive substances such as aerosol cans with a ammable
propellant in this appliance.
● The use of attachments not recommended by the manufacturer may be
hazardous.
● Please keep the products away from the re or similar glowing substance
before you dispose the appliance.
● GWP (Global Warming Potential): R600a=3
● When you dispose the appliance, take off the door and leave the shelves
in place so that children may not easily climb inside. And make sure the
coolant circuit, particularly the heat exchanger at the back/bottom of the
unit is not be damaged.
● The recycle symbol on the product or its packaging indicates that this
product is not to be handled as normal household waste and it is to be
taken to a recycling collection point for electrical and electronic goods.
● This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without supervision.
● This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
● Children aged from 3 to 8 years are allowed to load and unload
refrigerating appliances. They must have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
● This appliance is intended to be used in household and similar
applications such as:
1.staff kitchen areas in shops, ofces and other working environments;
2. farmhouses and by clients in hotels, motels and other residential type
environments;
.04.
INSTRUCTION MANUAL
3.bed and breakfast type environments;
4.catering and similar non-retail applications
– WARNING: Keep ventilation openings, in the appliance enclosure or in
the built-in structure, clear of obstruction.
– WARNING: Do not use mechanical devices or other means to
accelerate the defrosting process, other than those recommended by the
manufacturer.
– WARNING: Do not damage the refrigerant circuit.
– WARNING: Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type recommended
by the manufacturer.
- WARNING: When positioning the appliance, ensure the supply cord is not
trapped or damaged.
- WARNING: Do not locate multiple portable socket- outlets or portable
power suppliers at the rear of the appliance.
- WARNING: To avoid a hazard due to instability of the appliance, it must
be xed in accordance with the instructions
SCRAPPING OLD APPLIANCES
This appliance is marked according to the European directive 2012/19/EU
on Waste Electrical and Electronic Equipment (WEEE).
WEEE contains both polluting substances (which can cause negative
consequences for the environment) and basic components (which can
be re-used). It is important to have WEEE subjected to specic treatments,
in order to remove and dispose properly all pollutants, and recover and
recycle all materials.
Individuals can play an important role in ensuring that WEEE does not
become an environmental issue; it is essential to follow some basic rules:
--WEEE should not be treated as household waste;
--WEEE should be handed over to the relevant collection points managed
by the municipality or by registered companies. In many countries, for
large WEEE, home collection could be present.
.05.
INSTRUCTION MANUAL
In many countries, when you buy a new appliance, the old one may be
returned to the retailer who has to collect it free of charge on a one-to-one
basis, as long as the equipment is of equivalent type and has the same
functions as the supplied equipment.
Conformity
By placing the marking on this product, we declare, on our own responsibility,
compliance to all of European safety ,health and environmental requirements stated in
the legislation for this product.
Energy Saving
--Always ensure good ventilation. Do not cover ventilation opening or grille.
--Always keep fan louvers clear.
--Do not place appliance in areas of direct sunlight or close to a stove,
heather or similar object.
--Open or keep the doors open as little as possible
--Remove dust present on the rear of the appliance
Service
● You should not attempt to repair the appliance
yourself, as this could cause injury or a more serious
malfunction. If you require a service call then please
contact the Customer Care Department
DESCRIPTION OF APPLIANCE AND INSTALLATION
The following pictures only show description of appliance. The dimension and shelf
quantity may differ among the models of the same series.
PRESX30SB
.06.
INSTRUCTION MANUAL
570
853
840
380
Min 40mm
385
>570
>853
294
70
Height Adjustable:
•
813-833mm
Min 40mm
PRESX38DB
>813
>570
305
813
295
800
570
520
Height Adjustable:
•
853-873mm
75
.07.
PRESX60DB / PRESPROX60SRB
1770mm
>570
>813
INSTRUCTION MANUAL
Height Adjustable:
•
813-833mm
Min 40mm
PRES180DB
≥1770mm
(69 ¾”)
≥
730mm
(28 ¾”)
>600
A
595mm
(23 ½”)
680mm
(26 ¾”)
(69 ¾”)
635mm
≥
(25”)
.08.
INSTRUCTION MANUAL
ACCESSORY INSTALLATION BEFORE OPERATING
UNPACKING AND CLEANING THE WINE COOLER
Remove the exterior and interior packing materials.
•
Let the appliance stand upright for approximately
•
it to the power source, which helps to reduce the possibility of a cooling-system
malfunction from handling during transportation.
Use a soft cloth to clean the interior surface with lukewarm water.
•
IMPORTANT: The front louver at the base of the appliance is for ventilation. Nothing
should be placed in front of this front louver; otherwise your Wine Cooler may not
operate properly.
o A decorative plinth can be tted to the front of the base vent, a cut-out
should be made in the plinth with bigger size than the front louver. The
cut out is required whether the front louver is removed or not.
24 hours
Adjusting the height and levelling off your wine cabinet
o The appliance is equipped with adjustable feet, so that the height may
be adjusted to level the cabinet on uneven oor surfaces.
o We recommend that two people carry out this procedure.
o The height must be adjusted prior to building the appliance into the
housing unit and it should be set at such a height that the top panel of
the appliance ts exactly below the kitchen worktop.
o Tilt the appliance approximately 60° to allow access
to the adjustable feet.
o Take care to ensure the cabinet is supported at all
times.
before connecting
o Twist the foot into a suitable position to level the
cabinet.
o Repeat these steps for the other adjustable feet.
IMPORTANT: If the appliance is not level, then the door and door seal may be
affected.
.09.
INSTRUCTION MANUAL
Gasket
Washer
Handle Screws
Handle
IMPORTANT: Do not move the appliance when the feet are adjusted high.
Installing The Handle
● Remove the door Gasket slightly to expose the two screw holes.
●Fix the Handle by screwing the two Handle Screws tightly, the Handle Screws with
Washers are pre-installed inside the screw holes, pls.do not unscrew the Handle
Screws too much in case the Washers fell off.
● Replace the Gasket.
LOCK & UNLOCK THE DOOR (FOR OPTION)
●Lock is an optional function. If your Wine Cooler has such function, a key should be
attached inside the packing of this Manual.
●Insert the key into the lock and turn it counter-clockwise to unlock the door. To lock
it, please turn clockwise. Please save the key well.
OPERATING THE WINE COOLER
WORKING CLIMATE
The appliance is designed for operating from SN to T climate (see below climate class
•
chart). It is recommended to maintain the ambient around 22-25°C which helps the
appliance working with low power consumption.
Klimaklasse Romtemperatur
SN 10 - 32 °C (50
N 16 - 32 °C (61
ST 16 - 38 °C (61
T 16 - 43 °C (61
.10.
ºF-90ºF)
ºF-90ºF)
ºF-100ºF)
ºF-109ºF)
INSTRUCTION MANUAL
If the ambient temperature is above or below the designed climate range, the
•
performance of the unit may be affected. For example, the appliance operating in
extreme cold or hot conditions may cause interior temperatures to fluctuate, and the
temperature set 5-22°C may not be reached sometimes.
WINE STORAGE
The standard shelves are designed perfectly for Bordeaux bottle storage. The
•
maximum loaded bottles may vary subject to the different size or dimension wine
bottles you store.
The shelves is allowed to be pulled out by about 1/3 length of it for easy access to the
•
wine storage.
Stopper
Stopper
To prevent damaging the door gasket, make sure to have the door opened fully all
•
the way before pulling the shelves out.
Please store wine in sealed bottles.
•
Do not cover the shelves with aluminum foil or any other shelf material which may
•
prevent air circulation.
If the wine cooler is left empty for long periods, switch off, defrost, clean, dry, and
•
leave the door open to prevent mould developing within the appliance.
Pay attention to the recommended/preferable storage time of the wines you bought.
•
Opening the door for long periods can cause a significant increase of the temperature
•
in the compartments of the appliance. The recommended temperature for chilling/
storing wines is as below, please choose zones and temperatures accordingly.
Wine Type Recommender Temp.
Red Wines 15 - 18ºC (59ºF-64ºF)
Dry/White Wines 9 - 14ºC (48ºF-57ºF)
Rose Wines 10 - 11ºC (50ºF-52ºF)
Sparkling Wines 5 - 8ºC (41ºF-46ºF)
.11.
CONTROL PANEL (Control In Cabinet)
A B DC E
For Single Zone
•
A B
C E
INSTRUCTION MANUAL
D
F
A. Power B. Lighting C. Display Window D. Temp. Plus E. Temp.Minus
F. Lock / Unlock G. Function Indicator H.
For Dual Zone
•
F
A. Power B. Lighting C.
Lock/
F.
Unlock
POWER ON/OFF CONTROL
When the appliance is plugged in to a power outlet, it powers on automatically.
•
Touch the power mark and hold for 10 seconds to turn off (or turn on) the
•
ºC/ºF
G.
Switch
H.
G H I J K
Upper Zone
Display Window
Function
Indicator 1
G H
Switch
ºC/ºF
D. Temp. Plus E. Temp.Minus
Lower Zone
I.
Display Window
Function
J.
Indicator 2
K. Zone Select
appliance.
No matter it is under a locked or unlocked condition, you can turn off the appliance
•
by touching the power mark and holding for 10 seconds.
Warning: To avoid damaging the compressor, please do not turn on the
appliance again within 5 minutes after you turn it off.
.12.
INSTRUCTION MANUAL
UNLOCKING THE CONTROL PANEL
To unlock the control panel, touch the power mark and lighting mark
•
with 2 fingers at the same time and hold for 3 seconds . When unlocked a buzz sound
will be heard.
The control panel will be automatically locked with a buzz sound heard after 10
•
seconds without being touched.
Under the locked condition, the control panel will not react to any touching order for
•
Lighting On/Off and Temperature Setting.
INTERIOR LIGHTING ON/OFF CONTROL
Under the unlocked condition, touch the lighting mark to turn on (or turn off) the
•
interior cool LED lighting.
The lighting will stay on unstil it is manually turned off.
•
TEMPERATURE DISPLAY WINDOW
The temperature is displayed in digital which is the best way to be read out. The
•
digital is shown as the set temperature when you are setting the temperature.
When the temperature probe is out of order, the display window will show with “HH”
•
or “LL” instead of a digital figure while continuous buzz sound will be heard. In case
of this happens, this appliance is considerately designed to keep periodical running
of compressor and fans which helps to keep the coldness of the inside cabinet to
protect your stored wines.
Warning: To avoid destroying your stored wines, it is strongly recommended
to have the appliance repaired immediately, as the spare periodical running
can not ensure the appliance to achieve the temperature you have set.
TEMPERATURE SETTING
For Single Zone
The default temperature setting range is 5-20 ºC (41-68 ºF).
•
Touch the mark to increase the set temperature by 1
•
contrary, touch the mark to decrease the set temperature by 1
For Dual Zone
The default temperature setting ranges are 5-12 ºC (41-54 ºF) for the upper zone and
•
12-20 ºC (54-68 ºF) for the bottom zone.
Touch the mark to increase the set temperature by 1
•
contrary, touch the mark to decrease the set temperature by 1ºC
.13.
ºC (or by 1ºF)
ºC (or by 1ºF)
ºC (or by 1ºF)
(or by 1ºF).
. On the
. On the
.
INSTRUCTION MANUAL
Function
Indicator
2
SELECTING FAHRENHEIT(ºF) & CELSIUS (ºC) DISPLAY
For Single Zone
Touch the marks with 2 fingers at the same time and hold for 5 seconds, you
can interchange the Fahrenheit and Celsius display.
For Dual Zone
Directly touch the mark , you can interchange the Fahrenheit and Celsius display
for both zones at the same time.
FUNCTION INDICATING LIGHT
For Single Zone
o When the compressor starts to work, the Indicator will stay
on;
o In other conditions, the Indicator will be off.
For Dual Zone
o The Indicator 1 will ash every 2 seconds when
the unit is plugged in;
o The Indicator 1 will stay on when the compressor
starts to work;
o The Indicator 2 will ash every 3 seconds when
the heating function of lower zone starts to work;
Function
Indicator
1
Function
Indicator
o The Indicator 2 will stay on when the cooling
function of lower zone starts to work.
CARE AND MAINTENANCE
CLEANING THE WINE COOLER
Clean regularly surfaces of the wine coolerto avoid contamination of wines.
•
Turn off the power, unplug the appliance, and remove all items including shelves.
•
Wipe the inside surfaces with a sponge and baking soda solution. The solution should
•
be about 2 tablespoons of baking soda to 1 quart (approx. 1 litre) of warm water.
Wash the shelves with a mild detergent solution. Allow wooden shelves to dry before
•
placing back into the wine cooler.
Wring excess water out of the sponge or cloth when cleaning area of the controls, or
•
.14.
INSTRUCTION MANUAL
any electrical parts.
Wipe the outside cabinet with warm water and mild liquid detergent. Wipe dry with
•
a clean soft cloth.
Do not use steel wool or steel brush on the stainless steel. These will scratch the
•
stainless steel with steel particles and rusting may occur.
REMOVING THE SHELVES
Before removing a Shelf from the appliance, it is necessary to remove all the bottles
•
on the Shelf ;
For a model without Telescopic Rail, move the shelf to the position where the cut
•
of the wooden shelf is directly under the plastic stopper and lift the wooden shelf.
Please ensure these are replaced when the shelf is put back.
Make sure the shelves are fully engaged before loading any bottle into the
•
cabinet. Pull the shelves out all the way to the STOPPER position and push
them back in several times to make sure the shelves are properly engaged.
A. Cut B. Plastic Stopper
BA
• For a model with Telescopic Rail, pls. lift the whole Shelf upwards horizontally
to get it off from the 4 Locating Pins of Telescopic Rail.
Stopper
Cut
Locating Pin
Carbon Filter Change (Option)
.15.
INSTRUCTION MANUAL
A good ambient air quality is important for wine maturing. The Carbon Filter
is very helpful to absorb odor and improve air quality.For the models with
Carbon Filter, we suggest to replace it once a year.Pls.contact your dealer
to get the lter.
Removing the Carbon Filter:
o Hold the Carbon Filter and turn it 90° to the left or
right to Remove it;
Reinstalling the Carbon Filter:
o Hold the Carbon Filter and turn it 90° to the left or
right until it clicks into place.
Defrosting
o Defrosting occurs automatically inside of the Wine Cooler during operation. The
defrost water is collected by the evaporating tray and evaporates automatically.
o The evaporating tray and defrost water drain hole should be cleaned
periodically. This will prevent water from collecting in the bottom of the
Wine Cooler, instead of owing down the defrost drainage channel and
drain hole.
o You can also pour a small amount of water down the drain hole to clean
inside of it.
o You should be careful to make sure that wine bottles do not touch the
rear wall of the appliance, as this can interrupt the automatic defrosting
process and deect water into the base of your Wine Cooler.
Moving Your Wine Cooler
If you need to move your Wine Cooler to another location you should
follow the steps outlined below.
o Remove all items from the Wine Cooler.
o Securely tape down all loose items such as the shelves inside of the
appliance.
o Turn the adjustable foot up to the base to avoid damage.
o Tape the door closed.
o Ensure the appliance stays secure in the upright position during
transportation. Also protect the outside of the appliance with a blanket
or similar item.
Power Failure
.16.
INSTRUCTION MANUAL
o If power is cut to the appliance, for a few hours it will be able to maintain
the temperature inside the cabinet. Providing that the number of times
that the door is opened is kept to a minimum.
o If the power cut is for longer than a few hours, then you will need to store
the contents in an alternate location to prevent them being affected by
temperature rise.
IMPORTANT: If the appliance is unplugged, the power is lost or turned off you must
wait 5 minutes before restarting the Wine Cooler. If you attempt to restart before this
time delay, the compressor could be damaged.
Vacation Time
Short vacations: Leave the Wine Cooler in operation for holidays of less than 3 weeks.
Long vacations:
o If your appliance is not going to be in use for a period of time, you should
remove the bottles of wine and switch off the appliance
o The interior should be cleaned with a solution of bicarbonate of soda
and lukewarm water.
o The interior should then be thoroughly dried.
o To prevent mould growth, the door should be left slightly ajar.
Disconnecting From Power
o If the unit is unplugged, or there is a power cut, you must wait for 5
minutes before restarting. Attempting to restart the Wine Cooler before 5
minutes has elapsed, may cause it not to function.
.17.
INSTRUCTION MANUAL
TROUBLESHOOTING
If you feel the appliance is not working properly, follow these instructions to try to see
if you can solve the problem simply by yourself before calling for service.
No. PROBLEM PROBLEM POSSIBLE CAUSE / MEASURE
Not plugged in.
1 The wine cooler does not operate
2 The wine cooler is not cold enough
Automatically turn-on and
3
turn-off frequently
4 The lighting does not work
5 Too much vibration
The wine cooler seems to make
6
too much noise
The appliance is turned off.
The circuit breaker tripped or a blown fuse.
Check the temperature control setting.
External environment may require a higher setting.
The door is opened too frequently.
The door is not closed completely.
The door gasket does not seal properly.
The room temperature is hotter than normal.
A large amount of contents has been added to the wine
cooler.
The door is opened too frequently.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
Not plugged in.
The circuit breaker tripped or a blown fuse.
The lighting is turned off.
Check to assure that the appliance is level.
Check to assure no parts inside the cabinet or in the
compressor chamber are loose.
The rattling noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds
caused by the flow of refrigerant.
Contraction and expansion of the inside walls may
cause popping and crackling noises.
The appliance is not level.
7 The door will not close properly.
The display window is shown with “HH”
8
or “LL” instead of a digital figure,
and/or with continuous buzz sound.
The wine cooler is not level.
The door was reversed and not properly installed.
The gasket is dirty.
The shelves are out of position.
The temperature probe is out of order.
.18.
INSTRUCTION MANUAL
REVERSE THE DOOR SWING
Remarks:
●The following operations are available for a model with control in cabinet only and
with Right Door Hinge installed.
●All removed parts must be saved in order to do the door reinstallation.
Undercounter Wine Cooler
Include models: PRESX30SB, PRESX38DB, PRESX60DB and PRESPROX60SRB
Remarks:
To reverse the door from right hinge to left hinge, you need to get ready 2 new spare
•
parts: an Upper Left Hinge, and a Bottom Left Hinge.
All removed parts is suggested to be saved in case of door re-reversal.
•
1.Open the door, and loosen the 2 screws from Pivot Hinge of the Bottom Right Hinge.
Bottom Right Hinge
Pivot Hinge
o
60
Min.
Screw
2.Carefully remove the door from the Upper Right Hinge and prevent it from scratching. Take out
the Pivot Hinge from the door hinge hole.
Upper Right Hinge
Door
o
60
Min.
Bottom Right Hinge
.19.
Pivot Hinge
INSTRUCTION MANUAL
3.Unscrew the Upper Right Hinge and Bottom Right Hinge from the cabinet. Keep them well for
door re-installation.
Upper Right Hinge
Bottom Right Hinge
4.Pull out the 6 Plastic Caps at the front left corner of the cabinet. And move them all to the
right side.
Plastic Caps (6pcs)
5.Install the Upper Left Hinge and Bottom Left Hinge to the left side of the cabinet. Make sure
the screws are tightened.
Upper Left Hinge
Bottom Left Hinge
.20.
INSTRUCTION MANUAL
6.Move the Hinge Hole Cap (at the top of the door) from the left side to the right side.
Hinge Hole Cap
7.Remove the Handle Hole Cap (2pcs) on the right side of Door by prying it out gently with small
at screwdriver.
Handle Hole Cap
.21.
INSTRUCTION MANUAL
8.Gently pull the door gasket to one side to reveal the Handle Screws (2pcs) on the left side of
the Door.Unscrew it with a cross screwdriver and Remove the Handle (Leave the Washers as
where it is).
Handle Screw
Washer
Handle
9.Install the Handle to the right side of the door by screwing tightly the Handle Screws (2PCS).
Handle Screw
Washer
Handle
.22.
INSTRUCTION MANUAL
10.Push the Handle Hole Cap (2pcs) into the Handle Holes on the left side of the Door.
Handle Hole Cap
11.Insert the Pivot Hinge into the bottom hinge hole of the door.
Pivot Hinge
.23.
INSTRUCTION MANUAL
12.Install the door to the left hinge side by tightening the Pivot Hinge with the 2 screws.
Bottom Left Hinge
Pivot Hinge
Screws (2pcs)
PRES180DB
IMPORTANT İNFORMATİON
We recommend that you secure the racks in place using adhesive tape to prevent causing damage when
handling the appliance and store all removed parts carefully.
1. Remove the Hole Cover and Upper Hinge Cover on top side using a at-head screwdriver.
Remove the Upper Hinge by unscrewing the Hex Head Srews (4pcs). Now carefully lift the Door
o the Bottom Hinge with your assistant and gently set it aside. It is important to keep the
Hinge Washer on the top of Bottom Hinge for re-installation.
Hole Cover
Upper Hinge Cover
Hex Head Screw (4pcs)
Upper Hinge
Door
2.Move the Hinge Hole Cap (at the top of the door) from the left side to the right side. Move the
Pivot Hinge (at the bottom of the door) from the right to the left side.
.24.
INSTRUCTION MANUAL
Hinge Hole Cap
Pivot Hinge
3.Remove the Bottom Hinge Cover by prying it o gently with small at screwdriver. Remove the
Bottom Hinge by unscrewing the Hex Head Screw (4pcs). Unscrew the Pan Head Screw (4pcs)
from bottom left side. Now move the Bottom Hinge to the bottom left side and screw it tightly
with the Hex Head Screws (4pcs). Move the Pan Head Screw (4pcs) to the bottom right side and
screw it.
Hinge Washer
Hinge
Washer
Pan Head
Screw(4pcs)
Bottom
Hinge Cover
Hex Head
Screw(4pcs)
Bottom
Hinge
Hex Head
Screw(4pcs)
Bottom
Hinge Cover
Bottom
Hinge
Pan Head
Screw(4pcs)
4.Hold the Door carefully with your assistant and place it on the top of Bottom Hinge , make sure
the Pivot Hinge is at correct place through the Hinge Washer. Insert the pin of the Upper Hinge
into the Bushing on the top right and fix it with Hex Head Screw (4pcs). Cover the Upper Hinge
and Bottom Hinge with Upper Hinge Cover and Bottom Hinge Cover. Cover hinge screw holes
on the top right with the Hole Cover.
.25.
Hex Head
Screw(4pcs)
Upper Hinge
Bushing
Door
Hinge Washer
INSTRUCTION MANUAL
Upper
Hinge Cover
Upper Hinge
Hole Cover
Bottom Hinge
Bottom
Hinge Cover
5.Remove the Handle Hole Cap (2pcs) on the right side of Door by prying it out gently with small
at screwdriver.
Handle Hole Cap
.26.
INSTRUCTION MANUAL
6.Gently pull the door gasket to one side to reveal the Handle Screws (2pcs) on the left side of
the Door.Unscrew it with a cross screwdriver and Remove the Handle (Leave the Washers as
where it is).
Handle Screw
Washer
Handle
7Install the Handle to the right side of the door by screwing tightly the Handle Screws (2PCS).
Handle Screw
Washer
Handle
.27.
INSTRUCTION MANUAL
INSTRUCTION MANUAL
INSTRUCTION MANUAL
Front Grille
8.Push the Handle Hole Cap (2pcs) into the Handle Holes on the left side of the Door.
INSTALL REMOVABLE FRONT GRILLE
Handle Hole Cap
PRESX30SB / PREX60DB / PRESPROX60SRB
The Front Grille is packed as accessary, pls.unpack and remove it from cabinet
1.
inside. Place the unit on a soft and flat floor, lay it down to a suitable angle;
Front Grille
2. Install the Front Grille by screwing the 4 Tapping Screws (ST4.2x10) tightly with a
phillips screwdriver;
Tapping Screws
(4pcs, ST4.2x10)
.28.
INSTRUCTION MANUAL
INSTRUCTION MANUAL
Front Grille
Tapping Screws
(4pcs, ST4.2x10)
INSTRUCTION MANUAL
Front Grille
Tapping Screws
(4pcs, ST4.2x10)
3. The unit with the Front Grille installed.
Warning: The Front Grille is not a supporter, to avoid it twisted, pls.never
try to lay the unit down on the foot of the Front Grille.
HOW TO FIND OTHER L ANGUAGE USER MANUAL
You can find Norwegian, Swedish, Finnish and Danish user manual from below website.
You can download Norwegian user manual at https://temptech.no/manualer-og-
1.
installasjon/
You can download Swedish user manual at https://temptech.se/manualar-och-
2.
installation
You can download Finnish user manua at https://temptech.fi/kayttoohjeet-ja-
3.
asennus/
You can download Danish user manual at https://temptech.dk/brugervejledning-
4.
og-installation/
We take reservations about typing faults and if any problems occure, please contact
us at service@temptech.no.
.29.
Loading...