Temprel Inc THERMOCOUPLE CONNECTORS & ADAPTERS Catalog Page

(M)

(M)

(M)

(M)

(S3)

(S3)

(S3)

(S)

(S)

(S)

(S)

MINIATURE JACK & PLUG

LT610-T/1.5

(MJ)

LT600-T/1.5

(MP)

LT600-E/1.5

(MP)

LT610-J/1.5

(MJ)

LT600-J/1.5

(MP)

LT610-K/1.5

(MJ)

LT600-K/1.5

(MP)

LT610-E/1.5

(MJ)

LTP500-T/2.5

(P)

LTJ500-E/2.5

(J)

LTP500-E/2.5

(P)

LTJ500-J/2.5

(J)

LTP500-J/2.5

(P)

LTJ500-K/2.5

(J)

LTP500-J/2.5

(P)

LTJ500-T/2.5

(J

(MJSR)

(MPSR)

(JSR)

(PSR)

Dual cap screw design with dual hold-down screws. ANSI approved. Glass-lled thermoplastic nylon. Rated to

392 °F / 204 °C. Polarized, polished pin design. Accepts wire sizes 30 to 20 AWG solid or stranded. Choice of wire

strain relief grommet sizes: 0.5 mm, 1.5 mm, and 3.0 mm. (1.5 mm most common.)

STANDARD SERIES JACK & PLUG

ANSI approved. Glass-lled thermoplastic nylon construction. Rated to 394 °F / 204 °C. Polarized, polished pin

design. Single combo cap screw design. Accepts wire sizes up to 30 to 14 AWG solid or stranded. (Maximum wire

diameter 5/16”) Choice of wire strain relief grommet sizes: 1.5 mm, 2.5 mm, and 4.5 mm. (2.5mm most common.)

MOLDED ON ROUND PIN PLUG

ANSI approved. Glass-lled thermoplastic polyester nylon construction Rated to 525 °F / 274 °C.

Polarized, solid-alloy pin design. Molded component option (S, S3) only available on manufactured thermocouple.

MINIATURE MOLDED ON PLUG

ANSI approved. Glass-lled thermoplastic polyester nylon construction.

Rated to 525 °F / 274 °C. Polarized, polished pin design. Molded

component option (M) only available on manufactured thermocouple.

STRAIN RELIEF OPTIONS

Not available with molded on jack & plug options.

29

500 SERIES MINIATURE JACK & PLUG

MJ500

MP500

LTP/J500

LTMP/J500

LTMJ/J500

LTMP/J500

Single cap captive screw design. No internal wire hold-down screws required. ANSI approved. Glass-lled

thermoplastic polyester nylon construction. Rated to 525 °F / 274 °C. Polarized, polished pin design. Accepts wire sizes

30 to 20 AWG solid or stranded. Durable xed elastomer built-in wire strain relief. Phillips #1 screw.

Available Calibrations

T JE K

CONVERSION ADAPTERS

Thermocouple conversion adapters allow quick and easy connections between standard and mini connector systems.

Any combination of adapter is available to transition between male / female and mini / standard connections. ANSI approved.

Glass-lled thermoplastic polyester nylon construction. Rated to 392 °F / 204 °C. No assembly required.

Available Calibrations

T JE K

THERMOCOUPLE CONNECTORS & ADAPTERS

30