FOR MODEL :
910E
920E
ELLIPTICAL U S E R ’ S GUIDE
IN TRODUCTION
CONGRATULATIONS and THANK YOU for your purchase of this Tempo Fitness elliptical!
Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, an Tempo Fitness elliptical
can help you attain it – adding club-quality performance to your at-home workouts, with the ergonomics
and innovative features you need to get stronger and healthier, faster. Because we're committed to
designing fitness equipment from the inside out, we use only the highest quality components. It's a
commitment we back with one of the strongest frame-to-brake warranty packages in the industry.
You want exercise equipment that offers the most comfort, the best reliability and the highest quality
in its class.
Tempo Fitness delivers.
TA B L E OF CO N T E NT S
INTRODUCTION
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLYASSEMBLY
BEFORE
YOU BEGIN
Important Precautions
Assembly
Before You Begin
Elliptical Operation
Conditioning Guidelines
Troubleshooting & Maintenance
Limited Warranty
CONTACT INFORMATION
15
16
20
26
30
Back Panel
4
5
ELLIPTICAL
OPERATION
GUIDELINES
CONDITIONING
& MAINTENANCE
TROUBLESHOOTING
LIMITED
WARRANTY
3
INTRODUCTION ASSEMBLY
IM PORTA NT PR EC AU TIONS
PRECAUTIONS
IMPORTANT
ASSEMBLY
YOU BEGIN
YOU BEGIN
BEFORE
BEFORE
OPERATION
ELLIPTICAL
CONDITIONING
GUIDELINES
SAVE THESE INSTRUCTIONS
Read all instructions before using this elliptical. When using an electrical product, basic precautions
should always be followed, including the following: Read all instructions before using this elliptical. It is the
responsibility of the owner to ensure that all users of this elliptical are adequately informed of all warnings
and precautions. If you have any questions after reading this manual, contact Customer Tech Support at the
number listed on the back panel of this manual.
To reduce the risk of burns, fire, electrical shock or injury to persons:
• If you experience chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and
consult your physician before continuing.
• Maintain a comfortable pace. Do not sprint above 80 rpms on this machine.
• To maintain balance, it is recommended to keep a grip on the handlebars while exercising, mounting or
dismounting the machine.
• Do not wear clothes that might catch on any part of the elliptical.
• Do not turn pedal arms by hand.
• Make sure handlebars are secure before each use.
• Do not insert or drop any object into any opening.
• Unplug elliptical before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp
cloth only; never use solvents. (See MAINTENANCE)
• This elliptical should not be used by persons weighing more than 275 pounds. Failure to comply will void
the warranty.
• This elliptical is intended for in-home use only. Do not use this elliptical in any commercial, rental, school
or institutional setting. Failure to comply will void the warranty.
• Do not use elliptical in garages, porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply
may void the warranty.
• Use the elliptical only as described in this manual.
TROUBLESHOOTING
& MAINTENANCE
WARRANTY
LIMITED
It is essential that your elliptical is used only indoors, in a climate controlled room. If your elliptical has been
exposed to colder temperatures or high moisture climates, it is strongly recommended that the elliptical is
warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.
At NO time should pets or children under the age of 12 be closer to the elliptical than 10 feet.
At NO time should children under the age of 12 use the elliptical.
Children over the age of 12 should not use the elliptical without adult supervision.
4
AS SEMBLY
IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!
There are several areas during the assembly process of a elliptical that special attention must be paid. It is
very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened.
If the assembly instructions are not followed correctly, the elliptical could have frame parts that are not
tightened and will seem loose and may cause irritating noises. To prevent damage to the elliptical, the
assembly instructions must be reviewed and corrective actions should be taken.
UNPACKING
Unpack the product where you will be using it. Place the product on a level flat surface. It is recommended
that you place a protective covering on your floor. Note: It is recommended that you apply grease to the
threads of each bolt as you assemble the product, to prevent loosening and noise. Also, during each
assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely
tightening any ONE bolt.
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
Before proceeding, find your elliptical’s serial number
located on the console mast bracket and enter it in
the space provided below. Also locate the model name
which is located on the console mast.
ENTER YOUR SERIAL NUMBER AND
MODEL NAME IN THE BOxES BELOW:
SERIAL NUMBER :
MODEL NAME:
* Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
* Also enter this serial number on your Warranty Card.
ELLIPTICAL
OPERATION
GUIDELINES
CONDITIONING
& MAINTENANCE
TROUBLESHOOTING
LIMITED
WARRANTY
5
INTRODUCTION
TOOLS INCLUDED PARTS INCLUDED
c 5mm Allen Wrench
c 5mm T-Wrench
c Screwdriver
c 13/17mm Flat Wrench
c 1 Console
c 1 Console Mast
c 1 Front Stabilizer Tube
c 2 Upper Handlebars
c 2 Lower Handlebars
c 2 Pivoting Foot Pads
c 1 Top Side Cover
c 2 AA Batteries (910E Only)
CONSOLE (910E SHOWN)
UPPER HANDLEBAR
MAIN FRAME
LOWER HANDLEBAR
LOWER LINK ARM
FRONT STABILIZER TUBE
GRIP PULSE
CONSOLE MAST
PIVOTING FOOT PAD
PEDAL ARM
c 1 Power Supply (920E Only)
c 2 Handlebar Covers
c 2 Pedal Arm Covers
c 5 Hardware Bags
c 2 Front Stabilizer Caps
c Manual Resistance Knob (910E Only)
HANDLEBAR COVER
WATER BOTTLE CAGE
PEDAL ARM COVER
ROLLER WHEEL COVER
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
PRECAUTIONS
IMPORTANT
ASSEMBLY
YOU BEGIN
YOU BEGIN
BEFORE
BEFORE
OPERATION
ELLIPTICAL
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
WARRANTY
LIMITED
6
MAIN FRAME
FRONT FOOT TUBE
BOLTS (A)
WASHERS (B)
ASSEMBLY S T E P 1
BOLT (A)
20 mm
Qty: 2
WASHER (B)
17 mm
Qty: 2
A) Open HARDWARE BAG FOR STEP 1.
B) Attach the FRONT FOOT TUBE to the MAIN FRAME using 2 BOLTS (A) and 2 WASHERS (B).
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
HARDWARE BAG FOR STEP 1 CONTENTS :
ELLIPTICAL
OPERATION
GUIDELINES
CONDITIONING
& MAINTENANCE
TROUBLESHOOTING
LIMITED
WARRANTY
7
INTRODUCTION
BOLT (A)
70 mm
Qty: 2
WASHER (B)
17 mm
Qty: 4
SCREW (C)
Qty: 2
BOLT (D)
55 mm
Qty: 2
NUT (F)
Qty: 2
MAIN FRAME
REAR
WHEEL
TRACKS
BOLT (A)
WASHER (B)
PEDAL ARM COVER
SCREW (C)
BOLT (D)
NUTS (F)
PRECAUTIONS
IMPORTANT
ASSEMBLY
ASSEMBLY S T E P 2
YOU BEGIN
YOU BEGIN
BEFORE
BEFORE
OPERATION
ELLIPTICAL
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
A) Open HARDWARE BAG FOR STEP 2.
B) Attach the REAR WHEEL TRACKS to the MAIN FRAME using 2 BOLTS (A) and 2 WASHERS (B) from the front.
Then, finish securing the REAR WHEEL TRACKS to the MAIN FRAME by inserting 2 BOLTS (D) and 2 WASHERS
(B) from above and secure to 2 NUTS (F) from below.
C) Attach PEDAL ARM COVERS to PEDAL ARMS using SCREWS (C).
HARDWARE BAG FOR STEP 2 CONTENTS :
WARRANTY
LIMITED
8
ASSEMBLY S T E P 3
TOP CAP
CONSOLE MAST
PRE ATTACHED SCREWS
WATER BOTTLE CAGE
BOLT (A)
20 mm
Qty: 1
NUT (F)
Qty: 2
BOLT (E)
55 mm
Qty: 2
SPRING WASHER (D)
15 mm
Qty: 1
WASHER (B)
17 mm
Qty: 3
MAIN FRAME
CONSOLE MAST
BOLT (A)
BOLTS (E)
WASHERS (B)
NUTS (F)
SPRING WASHER (D)
WASHER (B)
TOP CAP
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
A) Open HARDWARE BAG FOR STEP 3.
B)
Slide the TOP CAP over the CONSOLE MAST.
the CONSOLE WIRES to the pre-attached routing wire. Discard wire when finished.
C) Attach the CONSOLE MAST to the MAIN FRAME using BOLT (A), SPRING WASHER (D) and WASHER (B) from
the front and 2 BOLTS (E), 2 WASHERS (B) and 2 NUTS (F) from the side.
HARDWARE BAG FOR STEP 3 CONTENTS :
Carefully pull console wires through the CONSOLE MAST. Attach
BEFORE
YOU BEGIN
ELLIPTICAL
OPERATION
GUIDELINES
CONDITIONING
& MAINTENANCE
TROUBLESHOOTING
LIMITED
WARRANTY
9
INTRODUCTION
PRE-ATTACHED BOLTS AND WASHERS
LOWER HANDLEBAR
PRE-ATTACHED SET SCREWS
UPPER HANDLEBAR
PRE-INSTALLED
BOLT & WASHER
RESISTANCE
KNOB
TENSION WIRE RESISTANCE
KNOB BRACKET
TENSION
CABLE
TOP KEY HOLE
BOTTOM KEY HOLE
PRECAUTIONS
IMPORTANT
ASSEMBLY
ASSEMBLY S T E P 4
STEPS A-E STEPS F-H
YOU BEGIN
YOU BEGIN
BEFORE
BEFORE
OPERATION
ELLIPTICAL
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
NOTE: There is NO hardware bag for this step. All hardware is pre-installed.
A) Pull TENSION CABLE out from square hole in console mast.
B) Turn RESISTANCE KNOB to highest resistance setting. Place the TENSION WIRE into the BOTTOM KEY HOLE
on the RESISTANCE KNOB BRACKET.
C) While holding the RESISTANCE KNOB BRACKET, pull the RESISTANCE KNOB up to slide it into the TOP KEY
HOLE position on the RESISTANCE KNOB BRACKET.
910E ONLY
D) Once the TENSION WIRE is in position, turn the RESISTANCE KNOB to the lowest resistance setting.
E) Slide RESISTANCE KNOB & BRACKET into the CONSOLE MAST and attach using PRE-INSTALLED BOLT &
WASHER.
F) Remove PRE-ATTACHED BOLT & WASHERS from CONSOLE MAST.
G) Slide LOWER HANDLEBARS onto CONSOLE MAST and attach by re-inserting PRE-ATTACHED SET SCREWS.
H) Slide UPPER HANDLEBARS onto LOWER HANDLEBARS. Secure UPPER HANDLEBARS to LOWER HANDLEBARS
using PRE-ATTACHED SET SCREWS.
WARRANTY
LIMITED
10
After handlebars are assembled they will rotate freely – be cautious. Until the
machine is fully assembled, do not grab the handlebars for support.
ASSEMBLY S T E P 5
HANDLEBAR
COVERS
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
NOTE: There is NO hardware bag for this step.
A) Attach WIRES from mast to handlebar. DO NOT PINCH WIRES.
B) Snap the front and back HANDLEBAR COVERS together onto the UPPER HANDLE BARS.
Note the position of the snap tabs on the covers before snapping into position.
C) Repeat on other side.
BEFORE
YOU BEGIN
ELLIPTICAL
OPERATION
GUIDELINES
CONDITIONING
11
& MAINTENANCE
TROUBLESHOOTING
LIMITED
WARRANTY
INTRODUCTION
LOWER LINK ARM
PEDAL ARM
BRACKET
PEDAL ARM BRACKET
PRE-ATTACHED WASHER
PRE-ATTACHED BOLTS
PRECAUTIONS
IMPORTANT
ASSEMBLY
ASSEMBLY S T E P 6
YOU BEGIN
YOU BEGIN
BEFORE
BEFORE
OPERATION
ELLIPTICAL
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
NOTE: There is NO hardware bag for this step.
A) Insert LOWER LINK ARM into PEDAL ARM BRACKET.
B) Insert PRE-ATTACHED BOLTS into BRACKET to attach PEDAL ARM and PRE-ATTACHED WASHER
to LOWER LINK ARM.
C) Repeat on other side.
WARRANTY
LIMITED
12
ASSEMBLY S T E P 7
LOWER HANDLEBAR
LOWER LINK ARM
NUT (C)
BOLT (E)
TEFLON WASHERS (B)
TEFLON WASHERS (B)
SPACER (G)
SPACER (G)
Qty: 2
BOLT (E)
50 mm
Qty: 2
NUT (C)
70 mm
Qty: 2
TEFLON WASHER (B)
20 mm
Qty: 4
STEP C
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
A ) Open HARDWARE BAG FOR STEP 7.
B) Align LOWER HANDLEBAR with LOWER LINK ARM.
CAUTION:
Be careful to keep the LOWER HANDLEBAR aligned with guide rail. Do not twist it to the left or
right while positioning it on the LOWER LINK ARM.
C) Slide SPACER (G) through the LOWER LINK ARM and 2 TEFLON WASHERS (B) outside of the
LOWER LINK ARM.
D) Insert BOLT (E) into outside end of LOWER LINK ARM to secure LOWER HANDLEBAR.
E) Insert NUT (C) on right side of LOWER LINK ARM
F) Repeat on other side.
HARDWARE BAG FOR STEP 7 CONTENTS :
ELLIPTICAL
OPERATION
GUIDELINES
CONDITIONING
& MAINTENANCE
TROUBLESHOOTING
13
LIMITED
WARRANTY
INTRODUCTION
CONSOLE WIRES
PRE-ATTACHED
SCREWS
CONSOLE
CONSOLE MAST
920E CONSOLE
PRECAUTIONS
IMPORTANT
ASSEMBLY
ASSEMBLY S T E P 8
NOTE: There is NO hardware bag for this
step. All hardware is pre-installed.
A) Attach the CONSOLE MAST wires to the
CONSOLE wires .
B) Carefully tuck the CONSOLE MAST wires
into the CONSOLE MAST before attaching
the CONSOLE.
C) Attach CONSOLE to the CONSOLE MAST
using the 4 PRE-ATTACHED SCREWS
(screws will have to be removed from
the console first).
YOU BEGIN
YOU BEGIN
BEFORE
BEFORE
OPERATION
ELLIPTICAL
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
DO NOT PINCH WIRES!
YOU’RE FINISHED!
WARRANTY
LIMITED
14
910E 920E
BE FORE YOU BEGIN
3 feet
6 feet
3 feet
1 foot
CONGRATULATIONS! on choosing your elliptical. You’ve taken an important step in developing and
sustaining an exercise program! Your elliptical is a tremendously effective tool for achieving your personal
fitness goals. Regular use of your elliptical can improve the quality of your life in so many ways.
HERE ARE JUST A FEW OF THE HEALTH BENEFITS OF EXERCISE:
• Weight Loss
• A Healthier Heart
• Improved Muscle Tone
• Increased Daily Energy Levels
INTRODUCTION
IMPORTANT
PRECAUTIONS
The key to reaping these benefits is to develop an exercise habit. Your new
elliptical will help you eliminate obstacles that prevent you from exercising.
Inclement weather and darkness won't interfere with your workout when you
use your elliptical in the comfort of your home. This guide provides you with
basic information for using and enjoying your new machine.
LOCATION OF THE ELLIPTICAL
Place the elliptical on a level surface. There should be 6 feet of clearance
behind the elliptical, 3 feet on each side and one foot in front for the power
cord (See diagram to the right). Do not place the elliptical in any area that
will block any vent or air openings. The elliptical should not be located in a
garage, covered patio, near water or outdoors.
ASSEMBLY
ASSEMBLY
BEFORE
BEFORE
YOU BEGIN
YOU BEGIN
ELLIPTICAL
OPERATION
15
GUIDELINES
CONDITIONING
& MAINTENANCE
TROUBLESHOOTING
LIMITED
WARRANTY
INTRODUCTION
PRECAUTIONS
IMPORTANT
ASSEMBLY
ASSEMBLY
YOU BEGIN
YOU BEGIN
BEFORE
BEFORE
EL LIPTICAL OPERATION
POWER
Your elliptical is powered by a power supply. The power must be plugged into the power jack, which is located
in the front of the 920E near the STABILIZER TUBE.
Do not operate the elliptical if the power cord or plug is damaged.
If the elliptical appears to not be working properly, do not use the elliptical.
MOVING
Your elliptical has a pair of transport wheels built
into the FRONT STABILIZER TUBE. To move, first
remove the power supply and firmly grasp the
CONSOLE MAST, carefully tilt and roll.
OPERATION
ELLIPTICAL
OPERATION
ELLIPTICAL
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
Our ellipticals are well built and heavy, weighing up to 200 lbs! Use care and
additional help if necessary when moving.
FOOT POSITIONING
Your elliptical offers a variety of foot positions. Moving your foot to the forward most position of the foot pad
increases your step height, which will create a feel similar to a step machine. Placing your foot toward the back
of the foot pad decreases your step height and creates more of a gliding feel, similar to a smooth walk or run.
Your elliptical also allows you to pedal both forward and backwards to offer a variation to your workout and to
focus on other major leg muscle groups such as your hamstrings and calves.
WARRANTY
LIMITED
16
910E C ON S O L E DI SP L AY
B
C
D
S T A R T / S T O P
R E S E T
A
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
ASSEMBLY
Note: There is a thin protective sheet of clear plastic on the overlay of the console and should be removed.
A) MONITOR DISPLAY: Speed, Time, Pulse, Distance, and Calories.
B) START/STOP: Press to start/pause/end your workout.
C) RESET: Press to reset the elliptical.
D) BOOK RACK: Holds reading material
910E C ON S O L E OP ER AT I O N
1) Turn on Elliptical by pressing any key.
2) Press START button and begin exercising. The time will count up from 0:00.
3) The resistance level can be adjusted during the workout by using the RESISTANCE KNOB.
BEFORE
YOU BEGIN
ELLIPTICAL
OPERATION
ELLIPTICAL
OPERATION
GUIDELINES
CONDITIONING
& MAINTENANCE
TROUBLESHOOTING
LIMITED
WARRANTY
17
INTRODUCTION
A
B
C
D
E
F
PRECAUTIONS
IMPORTANT
ASSEMBLY
ASSEMBLY
920E C ON S O L E DI SP L AY
YOU BEGIN
YOU BEGIN
BEFORE
BEFORE
OPERATION
ELLIPTICAL
OPERATION
ELLIPTICAL
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
Note: There is a thin protective sheet of clear plastic on the overlay of the console and should be removed.
A) MONITOR DISPLAYS: Speed, Time, Pulse, Distance, Level, Calories and Program Profiles.
B) START/STOP: Press to start/pause/end your workout.
C) ENTER: Used to set your program.
D) RESET: Press to reset the elliptical.
E) UP/DOWN ARROW KEYS: Used to adjust resistance and select programs.
F) BOOK RACK: Holds reading material
WARRANTY
LIMITED
18
920E C ON S O L E OP ER AT I O N
MANUAL
MANUAL
INTERVALS
MANUAL
INTERVALS
ROLLING
MANUAL
INTERVALS
ROLLING
WEIGHT LOSS
GOLF COURSE
RACE
CUSTOM 1
CUSTOM 2
THR ZONE 1
THR ZONE 2
VALLEY
TOUR
REVERSE TRAIN
RANDOM
WORKOUT CALENDAR
MANUAL
INTERVALS
ROLLING
WEIGHT LOSS
QUICK START
1) Make sure Elliptical is plugged in and power switch turned on.
2) Turn on Elliptical by pressing any key.
3) Press START button and begin exercising.
4) Program will automatically default to MANUAL (P1), the time will count up from 0:00, and the resistance
will default to level 1.
5) The resistance level can be adjusted during the workout.
SELECTING PROGRAMS
1) Select a program using the ARROW KEYS and press ENTER.
2) Set TIME using the ARROW KEYS and press ENTER or START.
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
ASSEMBLY
BEFORE
YOU BEGIN
PROGRAM PR O F I L E S
MANUAL
Allows you to adjust the resistance level to your preference, without a preset program.
INTERVALS
Improves your strength, speed and endurance by raising and lowering the resistance levels
through-out your workout to involve both your heart and muscles.
ROLLING
Creates the feeling of moving up and down hills by gradually increasing and decreasing
the resistance.
WEIGHT LOSS
Promotes weight loss by raising and lowering the resistance level, while keeping you in your fat
burning zone.
FAT BLAST
Keeps you in your fat burning zone.
CARDIO BURN
High intensity program that promotes Carbohydrate burn and taxes the Cardiovascular system.
19
ELLIPTICAL
OPERATION
ELLIPTICAL
OPERATION
GUIDELINES
CONDITIONING
& MAINTENANCE
TROUBLESHOOTING
LIMITED
WARRANTY
INTRODUCTION
PRECAUTIONS
IMPORTANT
ASSEMBLY
ASSEMBLY
HEART RAT E
HANDLEBARS
Place the palm of your hands directly on the grip pulse handlebars. Both hands must grip the bars for your heart
rate to register. It takes 5 consecutive heart beats (15-20 seconds) for your heart rate to register. When gripping
the pulse handlebars, do not grip tightly. You may experience an erratic readout if consistently holding the grip
pulse handlebars. Make sure to clean the pulse sensors to ensure proper contact can be maintained.
Check your exercise environment for sources of interference such as fluorescent lights, computers, underground fencing,
home security systems or appliances containing large motors. These items may cause erratic heart rate readouts.
You may experience an erratic readout under the following conditions:
• Pressing too hard on the sensor. Try to maintain moderate pressure while pressing the sensor.
• When you are breathing heavily during a workout.
• When your hands are constricted by wearing a ring.
• When your hands are dry or cold. Try to moisten your palms by rubbing them together to warm.
• Anyone with heavy arrhythmia.
• Anyone with arteriosclerosis or peripheral circulation disorder.
• Anyone whose skin on the measuring palm is especially thick.
YOU BEGIN
YOU BEGIN
BEFORE
BEFORE
OPERATION
ELLIPTICAL
CONDITIONING
CONDITIONING
GUIDELINES
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
CO NDITIONING GUIDE LI NE S
ALWAYS CONSULT YOUR PHYSICIAN BEFORE BEGINNING AN ExERCISE PROGRAM.
HOW OFTEN? (Frequency of Workouts)
The American Heart Association recommends that you exercise at least 3 to 4 days per week to maintain
cardiovascular fitness. If you have other goals such as weight or fat loss, you will achieve your goal faster with
more frequent exercise. Whether it’s 3 days or 6 days, remember that your ultimate goal should be to make
exercise a lifetime habit. Many people are successful staying with a fitness program if they set aside a specific
time of day to exercise. It doesn’t matter whether it’s in the morning before breakfast, during lunch hour or while
watching the evening news. What’s more important is that it’s a time that allows you to keep a schedule, and a
time when you won’t be interrupted. To be successful with your fitness program, you have to make it a priority in
your life. So decide on a time, pull out your day planner and pencil in your exercise times for the next month!
HOW LONG? (Duration of Workouts)
For aerobic exercise benefits, it’s recommended that you exercise from between 24 and 60 minutes per session.
But start slowly and gradually increase your exercise times. If you’ve been sedentary during the past year, it may
be a good idea to keep your exercise times to as little as five minutes initially. Your body will need time to adjust
to the new activity. If your goal is weight loss, a longer exercise session at lower intensities has been found to
be most effective. A workout time of 48 minutes or more is recommended for best weight loss results.
HOW HARD? (Intensity of Workouts)
How hard you workout is also determined by your goals. If you use your machine to prepare for a 5K workout,
you will probably work out at a higher intensity than if your goal is general fitness. Regardless of your long
WARRANTY
LIMITED
term goals, always begin an exercise program at low intensity. Aerobic exercise does not have to be painful to
be beneficial! There are two ways to measure your exercise intensity. The first is by monitoring your heart rate
(using the grip pulse handlebars), and the second is by evaluating your perceived exertion level (this is simpler
than it sounds!).
20
100%
75%
60%
B E A T S P E R M I N U T E
20 25 30 35 40 45 50 55 60 65
AGE
T A R G E T Z O N E
12
0
11
7
11
4
11
1
108
105
10
2
99
97
93
150
14
6
143
13
9
13
5
13
1
128
12
4
120
116
PERCEIVED ExERTION LEVEL
A simple way to gauge your exercise intensity is to evaluate your perceived exertion level. While exercising, if you are too
winded to maintain a conversation without gasping, you are working out too hard. A good rule of thumb is to work to the
point of exhilaration, not exhaustion. If you cannot catch your breath, it’s time to slow down. Always be aware of these
warning signs of overexertion.
TA R G ET HE A R T RATE Z ON E CH A R T
What is Target Heart Rate Zone?
Target Heart Rate Zone tells you
the number of times per minute
your heart needs to beat to
achieve a desired workout effect.
It is represented as a percentage
of the maximum number of times
your heart can beat per minute.
Target Zone will vary for each
individual, depending on age,
current level of conditioning,
and personal fitness goals. The
American Heart Association
recommends working-out at a
Target Heart Rate Zone of between
60% and 75% of your maximum
heart rate. A beginner will want to
workout in the 60% range while
a more experienced exerciser will
want to workout in the 70-75%
range. See chart for reference.
ExAMPLE:
For a 42-year-old user: Find age along the bottom of the chart (round to 40), follow age column up to
the target zone bar. Results: 60% of maximum Hear Rate = 108 Beats Per Minute, 75% of maximum
Heart Rate = 135 Beat Per Minute.
ALWAYS CONSULT YOUR PHYSICIAN BEFORE BEGINNING AN ExERCISE PROGRAM.
21
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
ASSEMBLY
BEFORE
YOU BEGIN
ELLIPTICAL
OPERATION
GUIDELINES
GUIDELINES
CONDITIONING
CONDITIONING
& MAINTENANCE
TROUBLESHOOTING
LIMITED
WARRANTY
INTRODUCTION
T I P S
STRETCHING
PRECAUTIONS
IMPORTANT
ASSEMBLY
ASSEMBLY
YOU BEGIN
YOU BEGIN
BEFORE
BEFORE
STRETCH FIRST
Before using your product, it is best to take a few minutes to do a few gentle stretching exercises. Stretching
prior to exercise will improve flexibility and reduce chances of exercise related injury. Ease into each of these
stretches with a slow gentle motion. Do not stretch to the point of pain. Make sure not to bounce while doing
these stretches.
1. STANDING CALF MUSCLE STRETCH
Stand near a wall with the toes of your left foot about 18" from the wall, and
the right foot about 12" behind the other foot. Lean forward, pushing against
the wall with your palms. Keep your heels flat and hold this position for a
count of 15 seconds. Make sure that you do not bounce while stretching.
Repeat on the other side.
OPERATION
ELLIPTICAL
CONDITIONING
CONDITIONING
GUIDELINES
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
2. STANDING QUADRICEP STRETCH
Using a wall to provide balance, grasp your left ankle
with your left hand and hold your foot against the back
of your thigh for 15 seconds. Repeat with your right
ankle and hand.
3. SITTING HAMSTRING & LOWER BACK MUSCLE STRETCH
Sit on the floor with your legs together and straight out in front of you. Do
not lock your knees. Extend your fingers towards your toes and hold for a
count of 15 seconds. Make sure that you do not bounce while stretching. Sit
upright again. Repeat one time.
WARRANTY
LIMITED
22
THE IMPORTANCE OF A WARM-UP & COOL DOWN
T I P S
T I P S
WARM UP
The first 2 to 5 minutes of a workout should be devoted to warming up. The warm-up will limber your
muscles and prepare them for more strenuous exercise. Make sure that you warm-up on your product at a
slow pace. The warm up should gradually bring your heart rate into your Target Heart Rate Zone.
COOL DOWN
Never stop exercising suddenly! A cool-down period of 3-5 minutes allows your heart to readjust to the
decreased demand. Make sure that your cool down period consists of a very slow pace to allow your heart
rate to lower. After the cool-down, repeat the stretching exercises listed above to loosen and relax your
muscles.
ACHIEVING YOUR FITNESS GOALS
An important step in developing a long-term fitness program is to determine your goals. Is your primary
goal for exercising to lose weight? Improve muscle? Reduce stress? Prepare for the spring racing schedule?
Knowing what your goals are will help you develop a more successful exercise program. Below are some
common exercise goals:
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
ASSEMBLY
BEFORE
YOU BEGIN
• Weight Loss - lower intensity, longer duration workouts
• Improve Body Shape and Tone - interval workouts, alternate between hi and low intensities
• Increased Energy Level - more frequent daily workouts
• Improved Sports Performance - high intensity workouts
• Improved Cardiovascular Endurance - moderate intensity, longer duration workouts
If possible try to define your personal goals in precise, measurable terms, and then put your goals in writing.
The more specific you can be, the easier it will be to track your progress. If your goals are long term, divide
them up into monthly and weekly segments. Longer term goals can lose some of the immediate motivation
benefits. Short-term goals are easier to achieve. Your console provides you with several readouts that can
be used to record your progress. You can track Distance, Calories or Time.
ELLIPTICAL
OPERATION
GUIDELINES
GUIDELINES
CONDITIONING
CONDITIONING
& MAINTENANCE
TROUBLESHOOTING
23
LIMITED
WARRANTY
INTRODUCTION
W E E K # W E E K LY G O A L
W E E K LY T O T A L S :
D AY
S U N DAY
M O N DAY
T U E SDAY
W E D NESDAY
T H U RSDAY
F R I DAY
S AT UR D AY
D AT E D I S TA N C E C A L O R I E S T I M E C O M M E N T S
W E E K # W E E K LY G O A L
W E E K LY T O T A L S :
D AY
S U N DAY
M O N DAY
T U E SDAY
W E D NESDAY
T H U RSDAY
F R I DAY
S AT UR D AY
D AT E D I S TA N C E C A L O R I E S T I M E C O M M E N T S
W E E K # W E E K LY G O A L
W E E K LY T O T A L S :
D AY
S U N DAY
M O N DAY
T U E SDAY
W E D NESDAY
T H U RSDAY
F R I DAY
S AT UR D AY
D AT E D I S TA N C E C A L O R I E S T I M E C O M M E N T S
PRECAUTIONS
IMPORTANT
ASSEMBLY
ASSEMBLY
WE EKLY LOG SHEETS
YOU BEGIN
YOU BEGIN
BEFORE
BEFORE
OPERATION
ELLIPTICAL
CONDITIONING
CONDITIONING
GUIDELINES
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
WARRANTY
LIMITED
24
MO NTHLY LO G S HE ET S
W E E K # W E E K LY G O A L
W E E K LY T O T A L S :
D AY
S U N DAY
M O N DAY
T U E SDAY
W E D NESDAY
T H U RSDAY
F R I DAY
S AT UR D AY
D AT E D I S TA N C E C A L O R I E S T I M E C O M M E N T S
W E E K # W E E K LY G O A L
W E E K LY T O T A L S :
D AY
S U N DAY
M O N DAY
T U E SDAY
W E D NESDAY
T H U RSDAY
F R I DAY
S AT UR D AY
D AT E D I S TA N C E C A L O R I E S T I M E C O M M E N T S
W E E K # W E E K LY G O A L
W E E K LY T O T A L S :
D AY
S U N DAY
M O N DAY
T U E SDAY
W E D NESDAY
T H U RSDAY
F R I DAY
S AT UR D AY
D AT E D I S TA N C E C A L O R I E S T I M E C O M M E N T S
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
ASSEMBLY
25
BEFORE
YOU BEGIN
ELLIPTICAL
OPERATION
GUIDELINES
GUIDELINES
CONDITIONING
CONDITIONING
& MAINTENANCE
TROUBLESHOOTING
LIMITED
WARRANTY
INTRODUCTION
PRECAUTIONS
IMPORTANT
ASSEMBLY
ASSEMBLY
YOU BEGIN
YOU BEGIN
BEFORE
BEFORE
TR OUBLESHOOTING
Your Tempo Fitness elliptical is designed to be reliable and maintenance-free. However, if you do experience
problems with your elliptical, please reference the troubleshooting guide listed below.
PROBLEM: The console does not light up.
SOLUTION: Verify the following:
• The outlet the machine is plugged into is functional. Double check that the breaker has not tripped.
• The correct adapter is being used. Only use the adapter provided or authorized by Tempo Fitness.
• The adapter is not pinched or damaged and is properly plugged into the outlet AND the machine.
• The power switch is turned to the ON position (may not apply to all models).
• Turn off the machine and unplug power cord. Remove the console and check that all connections to the console
are secure and not damaged or pinched.
• (910E) Check batteries and make sure replacements are not needed.
PROBLEM: The console lights up but the Time/RPM’s do not count.
SOLUTION: Verify the following:
• Turn off machine and unplug power cord. Remove the console and check that all connections to the console are
secure and not damaged or pinched.
• If doing the above does not fix the problem, the speed sensor and/or magnet may have become dislodged or
damaged.
OPERATION
ELLIPTICAL
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
PROBLEM: The resistance levels seem to be incorrect, seeming too hard or too easy.
SOLUTION: Verify the following:
• The correct adapter is being used. Only use the adapter provided or authorized by Tempo Fitness.
• Reset the console and allow the resistance to reset to the default position. Restart and retry the resistance levels.
PROBLEM: The roller wheels appear to be leaving particles on the guide rails.
SOLUTION: This is considered normal wear of the elliptical wheels.
To remove, simply wipe off the roller wheels and guide rails with a damp cloth.
PROBLEM: The elliptical makes a squeaking or chirping noise.
SOLUTION: Verify the following:
• The elliptical is on a level surface.
• Loosen all bolts attached during the assembly process, grease the threads, and tighten again.
WARRANTY
LIMITED
26
HEART RAT E TROUBLESHO O T I N G
PROBLEM: There is no heart rate reading.
SOLUTION: Remove the console and verify that the heart rate cables are attached properly, making
sure that the cables are securely inserted into the console.
Check your exercise environment for sources of interference such as high power lines, large motors, etc.
YOU MAY ExPERIENCE AN ERRATIC READOUT UNDER THE FOLLOWING CONDITIONS:
• Gripping the heart rate handlebars too tight. Try to maintain moderate pressure while holding onto the
heart rate handlebars.
• Constant movement and vibration due to constantly holding the heart rate grips while exercising.
• When you are breathing heavily during a workout.
• When your hands are constricted by wearing a ring.
• When your hands are dry or cold. Try moistening your palms or rubbing them together to warm.
• Anyone with heavy arrhythmia.
• Anyone with arteriosclerosis or peripheral circulation disorder.
• Anyone whose skin on the measuring palms is especially thick.
• Low light environments can also affect proper readings.
NOTE: Outside interference sources such as computers, motors and fluorescent lights may cause the heart rate
reading to be erratic.
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLYASSEMBLY
BEFORE
YOU BEGIN
If the above troubleshooting section does not remedy the problem, discontinue use and turn the power off.
CALL CUSTOMER TECH SUPPORT AT THE NUMBER ON THE BACK PANEL.
WHEN YOU ARE NEAR THE EQUIPMENT
The following information may be asked of you when you call. Please have these items readily available:
• Model Name
• Serial Number
• Date of Purchase (receipt or credit card statement)
In order for Customer Tech Support to service your elliptical, they may need to ask detailed questions about the
symptoms that are occurring. Some troubleshooting questions that may be asked are:
• How long has this problem been occurring?
• Does this problem occur with every use? With every user?
• If you are hearing a noise, does it come from the front, back or inside? What kind of noise is it (thumping,
grinding, squeaking, chirping etc.)?
• If you are having a resistance problem what is occurring? Is the resistance always too hard or too easy?
Does the resistance respond when pushing the buttons on the console? Does the resistance constantly cycle
through the levels during the workout?
• Has the machine been maintained per the maintenance schedule?
• Does the problem occur when using the handlebars? Without using the handlebars?
ELLIPTICAL
OPERATION
GUIDELINES
CONDITIONING
& MAINTENANCE
& MAINTENANCE
TROUBLESHOOTING
TROUBLESHOOTING
Answering these and other questions will give the technicians the ability to send proper replacement parts and
the service necessary to get you and your Tempo Fitness elliptical running again!
27
LIMITED
WARRANTY
INTRODUCTION
PRECAUTIONS
IMPORTANT
ASSEMBLY
ASSEMBLY
YOU BEGIN
YOU BEGIN
BEFORE
BEFORE
COMMON PR O D U C T QUESTIONS
ARE THE SOUNDS MY ELLIPTICAL MAKES NORMAL?
Our ellipticals are some of the quietest available because they use belt drives and friction free magnetic
resistance. We use the highest grade bearings and belts to minimize noise. However, because the resistance
system itself is so quiet, you will occasionally hear other slight mechanical noises. Unlike older, louder
technologies, there are no fans, friction belts, or alternator noises to mask these sounds on our ellipticals.
These mechanical noises, which may or may not be intermittent, are normal and are caused by the transfer
of significant amounts of energy to a rapidly spinning flywheel. All bearings, belts and other rotating parts
will generate some noise which will transmit through the casing and frame. It is also normal for these
sounds to change slightly during a workout and over time because of thermal expansion of the parts.
WHY IS THE ELLIPTICAL I HAD DELIVERED LOUDER THAN THE ONE AT THE STORE?
All fitness products seem quieter in a large store showroom because there is generally more background
noise than in your home. Also, there will be less reverberation on a carpeted concrete floor than on a wood
overlay floor. Sometimes a heavy rubber mat will help reduce reverberation through the floor. If a fitness
product is placed close to a wall, there will be more reflected noise.
HOW LONG WILL THE DRIVE BELT LAST?
The computer modeling we have done indicated virtually thousands of maintenance free hours. Belts are
now commonly used in far more demanding applications such as motorcycle drives.
OPERATION
ELLIPTICAL
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
CAN I MOVE THE TRAINER EASILY ONCE IT IS ASSEMBLED?
Your elliptical has a pair of transport wheels built into the front legs. It is easy to move your elliptical by
rolling it on the front transport wheels. It is important that you place your elliptical in a comfortable and
inviting room. Your elliptical is designed to use minimal floor space. Many people will place their ellipticals
facing the TV or a picture window. If at all possible, avoid putting your elliptical in a unfinished basement.
To make exercise a desirable daily activity for you, the elliptical should be in a comfortable setting.
CAN I PEDAL BACKWARDS ON MY ELLIPTICAL?
Your elliptical allows you to pedal both forward and backwards to exercise and strengthen a wider range
of muscles.
WARRANTY
LIMITED
28
MA INTENANCE
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our ellipticals so lubrication is not needed. The most important
maintenance step is to simply wipe your perspiration off the trainer after each use.
HOW DO I CLEAN MY ELLIPTICAL?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
Cleanliness of your elliptical and its operating environment will keep maintenance problems
and service calls to a minimum. For this reason, Tempo Fitness recommends that the following
preventive maintenance schedule be followed.
AFTER EACH USE (DAILY)
Turn off the elliptical by unplugging the power cord from the wall outlet
• Wipe down the elliptical with a damp cloth. Never use solvents, as they can cause damage to the
elliptical.
• Inspect the power cord. If the power cord is damaged, contact Tempo Fitness.
• Make sure the power cord is not underneath the elliptical or in any other area where it can become
pinched or cut.
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLYASSEMBLY
BEFORE
YOU BEGIN
To remove power from the elliptical, the power cord must be disconnected from
the wall outlet.
WEEKLY
Clean underneath the elliptical, following these steps:
• Turn off the elliptical
• Move the elliptical to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the
elliptical.
• Return the elliptical to its previous position.
EVERY MONTH
• Inspect all assembly bolts and pedals on the machine for proper tightness.
• Clean any debris off of the pedal arm wheels and guide rails.
ELLIPTICAL
OPERATION
GUIDELINES
CONDITIONING
& MAINTENANCE
& MAINTENANCE
TROUBLESHOOTING
TROUBLESHOOTING
29
LIMITED
WARRANTY
INTRODUCTION
LI MITED HOME-USE WARRANTY
PRECAUTIONS
IMPORTANT
ASSEMBLY
ASSEMBLY
YOU BEGIN
YOU BEGIN
BEFORE
BEFORE
OPERATION
ELLIPTICAL
CONDITIONING
GUIDELINES
WEIGHT CAPACITY = 275 lbs
FRAME • 3 YEARS (910E) - 5 YEARS (920E)
Tempo Fitness warrants the frame against
defects in workmanship and materials for 3
years (910E) or 5 years (920E).
BRAKE • 1 YEAR (910E) - 3 YEARS (920E)
Tempo Fitness warrants the brake against
defects in workmanship and materials for the
period of 1 year (910E) or 3 years (920E).
ELECTRONICS & PARTS • 90 DAYS
Tempo Fitness warrants the electronic
components and all original parts for a
period of 90 days from the date of original
purchase, so long as the device remains in
the possession of the original owner.
LABOR • 90 DAYS
Tempo Fitness shall cover the labor cost for
the repair of the device for a period of ninety
days from the date of the original purchase, so
long as the device remains in the possession
of the original owner.
ExCLUSIONS AND LIMITATIONS
Who is covered:
• The original owner and is not transferable.
What IS covered:
• Repair or replacement of a defective motor, electronic component, or defective
part and is the sole remedy of the warranty.
What IS NOT covered:
• Normal wear and tear, improper assembly or maintenance, or installation of
parts or accessories not originally intended or compatible with the equipment
as sold.
• Damage or failure due to accident, abuse, corrosion, discoloration of paint
or plastic, neglect, theft, vandalism, fire, flood, wind, lightning, freezing, or
other natural disasters of any kind, power reduction, fluctuation or failure from
whatever cause, unusual atmospheric conditions, collision, introduction of
foreign objects into the covered unit, or modifications that are unauthorized or
not recommended by Tempo Fitness.
• Incidental or consequential damages. Tempo Fitness is not responsible or
liable for indirect, special or consequential damages, economic loss, loss of
property, or profits, loss of enjoyment or use, or other consequential damages of
whatsoever nature in connection with the purchase, use, repair or maintenance
of the product.
• Equipment used for commercial purposes or any use other than a single family
or Household, unless endorsed by Tempo Fitness for coverage.
• Equipment owner or operated outside the US and Canada.
• Delivery, assembly, installation, setup for original or replacement units or labor
or other costs associated with removal or replacement of the covered unit.
• Any attempt to repair this equipment creates a risk of injury. Tempo Fitness is not
responsible or liable for any damage, loss or liability arising from any personal
injury incurred during the course of, or as a result of any repair or attempted
repair of your fitness equipment by other than an authorized service technician.
All repairs attempted by you on your fitness equipment are undertaken AT YOUR
OWN RISK and Tempo Fitness shall have no liability for any injury to the person
or property arising from such repairs.
TROUBLESHOOTING
& MAINTENANCE
WARRANTY
WARRANTY
LIMITED
LIMITED
30
SERVICE/RETURNS
• In-home service is available only within 150 miles of the nearest authorized
repair center.
• All returns must be pre-authorized by Tempo Fitness.
• Tempo Fitness’ obligation under this warranty is limited to replacing or repairing,
at Tempo Fitness’ option, the product at one of its authorized service centers.
• A Tempo Fitness authorized service center must receive all products for which
a warranty claim is made. These products must be received with all freight
and other transportation charges prepaid, accompanied by sufficient proof of
purchase.
• Parts and electronic components reconditioned to As New Condition by Tempo
Fitness or its vendors may sometimes be supplied as warranty replacement parts
and constitute fulfillment of warranty terms.
• This warranty gives you specific legal rights, and your rights may vary from
state to state.
CU STOMER TECH SUPPORT
If you have any questions or comments, you may contact one of our
trained customer technicians via phone, email or our website.
Customer Tech Support Hotline: 1 -8 6 6- 9 9- T e mp o
Email: comments@Tempo-fitness.com
Website: www.Tempo-fitness.com
Customer Tech Support hours: Monday - Friday, 8 am - 5 pm CST (excluding holidays)
NOTE: Please read the TROUBLESHOOTING section before contacting Customer Tech Support.
DO NOT return the product to the store.
1 6 2 0 L a n d m a r k D r,
C o t t a g e G r o v e , W I 5 3 5 2 7
T e l : 1 . 8 6 6 . 9 9 . T E M P O
910E / 920E Rev. 1.8 | © 2006 Tempo Fitness Products | Designed & Engineered in the U.S.A. | Made in China
Loading...