Tema Telecomunicazioni AA-10, COM124, AA-11, COM123 Technical Manual

TEMA TELECOMUNICAZIONI S.r.l.

Telecommunications - Electronics

Doorphone PBX interface

AA-10

for connection with analog trunk

TECHNICAL MANUAL – INSTALLATION

AA-10 System manual SW Version 9

PRELIMINARY DOCUMENTATION

Made in Italy by TEMA TELECOMUNICAZIONI S.r.l.

Recommendations

1. Use only original spare parts and consumables supplied by Tema Telecomunicazioni Srl for this equipment. The company shall
not be held responsible for any damage caused by the use of materials that they have not supplied.

2. The device has been carefully manufactured and tested. In any case, the product is not recommended for use in situations in

which incorrect operating may result in damage to persons and/or property.

3. We recommend that you carefully read all this manual before starting to use the device.

4. Do not expose the device to sunlight and protect it from sources of heat, dust, humidity and chemical agents.

5. This manual is the property of Tema Telecomunicazioni Srl and any duplication and reproduction even partial, as well as
storage on any type of media is forbidden without written permission from Tema Telecomunicazioni Srl.

Revision Date Revision reason Prepared Checked/Approved

5 10/05/2016 Update GM FL

MAS-AA10-REV05EN Page 1 of 12

TEMA TELECOMUNICAZIONI SRL Doorphone PBX interface AA-10

DICHIARAZIONE DI CONFORMITÀ CE

La sottoscritta società TEMA TELECOMUNICAZIONI SRL
con sede in Via C. Girardengo, 1/4 - 20161 MILANO

dichiara che il prodotto Interfaccia Citotelefonica – Door Phone Pbx Interface
Codici AA-10, AA-11, COM123, COM124
è stato costruito in conformità alle seguenti normative:
SICUREZZA EN 60950
EMC EN 55022

EN 55024
EN 61000-6-1
EN 61000-6-3

TERMINALE DI TBR 21 (1998) – Terminal Equipment (TE); Attachment
TELECOMUNICAZIONE requirements for pan-European approval for connection
to the analogue Public Switched Telephone Networks (PSTNs)
of TE (excluding TE supporting the voice telephony service) in
which network addressing, if provided, is by means of Dual
Tone Multi Frequency (DTMF) signalling.

Inoltre il prodotto sopra menzionato soddisfa i requisiti essenziali delle seguenti direttive:

• Direttiva LVD 73/23/EEC (Low Voltage Directive)

• Direttiva EMC 89/336/EEC – 92/31/ECC

• Direttiva 99/05/EC per apparati di Radio e Telecomunicazioni

MILANO, 27 Maggio 2005 TEMA TELECOMUNICAZIONI SRL
Felice Lamanna
Amministratore

DECLARATION OF CONFORMITY CE

MAS-AA10-REV05EN Page 2 of 12

TEMA TELECOMUNICAZIONI SRL Doorphone PBX interface AA-10

I. IMPORTANT INFORMATIONS REGARDING THE RECOVERY AND RECYCLING OF THIS

ELECTRONIC DEVICE

The crossed-out wheeled bin symbol below indicates that this electronic equipment is intended to
be disposed in a separate collection and not in an unsorted municipal waste, in order to provide for
the treatment of WEEE (Waste Electrical and Electronic Equipment) using best available recovery
and recycling techniques.
Specific treatment for WEEE is indispensable in order to avoid the dispersion of pollutants and
other hazardous substances into the waste stream, while recycling leads to reduction of disposal of
waste and the negative impacts on environment and human health. That is, priority is given to
reuse of WEEE in its components, subassemblies and consumables.
As the final holder, the user has an important role in contributing to reuse, recycling and other
forms of recovery of WEEE and is responsible to return this waste in the collection facilities set up
by EC Member Stases and to fulfill other duties in compliance with Directive 2002/96/EC and local
laws.

MAS-AA10-REV05EN Page 3 of 12

TEMA TELECOMUNICAZIONI SRL Doorphone PBX interface AA-10

1. OVERVIEW OF AA-10 INTERFACE

The AA-10 doorphone-PBX interface is designed to manage the external doorbell of the vast
majority of door systems (4 or 5 wires) through an analog trunk of the PBX. When a visitor pushes
the doorbell, AA-10 makes a call to the trunk. This will be typically managed by the PBX operator.
Then the operator can speak with the visitor at the doorbell and then open the door with a DTMF
command. AA-10 is equipped with a relay to open the door, plus two auxiliary relays (e.g. to turn
on external lights or to control other devices). Many commands can be given through DTMF, such
as: start voice communication with the external doorbell, electric door or gate opening,
(de)activation of aux relay 1, (de)activation of aux relay 2 etc. The device parameters can be
programmed through the phone as well.

2. MAIN CHARACTERISTICS

The main features of AA-10 are:

• Connection to most doorbell systems (4 or 5 wires)

• DIN rail mount, fitted with 1 open-door relay plus 2 auxiliary relays

• Configurable activation time and number of pulses of the open-door relay

• Programmable using a standard DTMF phone

• Non-volatile parameter memory (keeps settings even when not powered)

• Power and status LEDs

3. GENERAL FUNCTIONS

When the external doorphone button is pushed, the device generates automatically a call to the
PBX. As soon as AA-10 detects the operator answer, it stops the ring current and waits for DTMF
commands. In the meanwhile it beeps every 2 seconds. In the “normal” mode the operator must
dial “1” to activate the communication with the external doorphone. Once the voice connection is
established, the operator can activate the open-door relay dialing “2”.

Hanging up, AA-10 returns idle and ready for a new access request. It is also possible to connect
with the external doorphone dialing the suitable digits (dependent on the PBX configuration). It will
beep every 2 seconds and connect the caller to the doorphone when “1” is dialed. This feature is
useful if there is the need to activate a voice connection without an explicit request from the
outside. For example when the presence of a guest is detected using a camera.

AA-10 releases the call and returns idle if the operator does not answer within 45 seconds. If the
operator answers to a call from AA-10 not during the working hours and does not want to open the
door nor speak with the guest, he can simply hang up after hearing the AA-10 tone. An the external
doorphone, it will look like if nobody were present inside.

Calling AA-10 opens the possibility to use its additional features, in particular to activate the two
auxiliary relays according to their programming. They can be used to open additional doors or
gates, as well as to turn on a lamp when it’s dark.

By combining the AA-10 relays with other appliances, it is possible for example to activate the
heating/cooling system.

It is possible to set AA-10 to work in “autoconnect” mode. In this mode, AA-10 will work in the
same way as described above. The difference is that when the operator answer to the AA-10 call,
the system immediately connect the visitor with him (no “1” digit required, as the “normal” mode).

MAS-AA10-REV05EN Page 4 of 12