Tema Telecomunicazioni AD635 Product Manual

AD635

VoIP SIP 12W PoE Wall Speaker

Serie Audio Over IP Network

PRODUCT MANUAL

Version HW 1.0 - Version SW 1.08m

Revision

Date Revision reason

Prepared

Checked/Approved

0 20/03/2017 First release MM, DP DP, FL

TEMA TELECOMUNICAZIONI

“IP COMMUNICATION AND SECURITY COMPANY”

WWW.TEMATLC.IT

Products for VoIP SIP LAN networking Communications, Paging Amplifiers Systems and Audio Applications. Zone Announcements, Night Ringer, Multicast general call, Background music, Standard SIP call or Emergency call, SD memory with pre-recorded

ssages, Relays for LAN drives.

TEMA TELECOMUNICAZIONI

VoIP SIP 12W PoE Speaker AD635

MAS-AD635-REV00EN Page 2 of 46

We, TEMA TELECOMUNICAZIONI SRL Via C. Girardengo, 1/4 - 20161 MILANO

declare under our sole responsibility that the product:

Product name Altoparlante VoIP SIP 12W PoE per montaggio a parete

Trade name TEMA TELECOMUNICAZIONI Srl Type or model AD635 and accessories --

to which this declaration relates is in conformity with the essential requirements and other relevant requirements of the R&TTE Directive ( 1999/5/EC, 2006/95/EC, 2004/108/EC ).

The product is in conformity with the followings standards and/or other normative documents:

HEALT & SAFETY EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011 EMC EN 55022:2010, EN 55024:2010, EN 61000-3-2:2006

EN 61000-3-3 :2008

MILANO, 20 February 2017 TEMA TELECOMUNICAZIONI SRL D. Pontillo

IMPORTANT INFORMATIONS REGARDING THE RECOVERY AND RECYCLING OF THIS ELECTRONIC DEVICE

DICHIARAZIONE DI CONFORMITÀ CE

DECLARATION OF CONFORMITY CE

The crossed

out wheeled bin symbol below indicates that this electronic equipment is

intended to be disposed in a separate collection and not in an unsorted municipal waste, in order to provide for the treatment of WEEE (Waste Electrical and Electronic Equipment) using best available recovery and recycling techniques. Specific treatment for WEEE is indispensable in order to avoid the dispersion of pollutants and other hazardous substances into the waste stream, while recycling leads to reduction of disposal of waste and the negative impacts on environment and human health. That is, priority is given to reuse of WEEE in its components, subassemblies and consumables. As the final holder, the user has an important role in contributing to reuse, recycling and other forms of recovery of WEEE and is responsible to return this waste in the collection facilities set up by EC Member States and to fulfill other duties in compliance with Directive 2002/96/EC and local laws.

UNI EN ISO 9001:2008

TEMA TELECOMUNICAZIONI is a certifi

ed company

The crossed

out wheeled bin symbol below indicates that this electronic equipment is

UNI EN ISO 9001:2008

TEMA TELECOMUNICAZIONI is a certified company

TEMA TELECOMUNICAZIONI

VoIP SIP 12W PoE Speaker AD635

MAS-AD635-REV00EN Page 3 of 46

RECOMMENDATIONS

1. It is recommended to read this entire manual before proceeding to the installation of the device.

2. The installation and commissioning of the device can only be performed by specialized technicians.

3. The device is accurately manufactured and tested. In any case, the product is not recommended for use where an error of operations can cause property damage and/or injury to persons.

4. It is expressly not recommended maintenance inside the device which must be carried out by Tema Telecomunicazioni, the removal of the closures will invalidate the warranty and makes accessible internal parts with risk of electric shock.

5. Tema Telecomunicazioni accepts no responsibility for damage to property and/or persons resulting from incorrect use of the equipment or by procedures that do not comply with the instructions in this manual. Tema Telecomunicazioni reserves the right to make modification to the technical and functional specifications at any time and without any notice.

6. Products powered via PoE (Power over Ethernet) may only be connected with cables coming from the internal network company (inside the building), are not allowed connections LAN cables coming from outside the building.

7. Use for this device only and exclusively original spare parts and consumables supplied by Tema Telecomunicazioni. The company is not responsible for damage caused by the use of materials not supplied by the same.

8. Do not expose the unit to direct sunlight, protect from heat, dust, humidity and chemicals.

9. Tema Telecomunicazioni reserves the right to vary the product characteristics for improvement without prior

notice. Check the WWW.TEMATLC.IT website for any updates to the latest firmware, manuals, and technical documentation.

10. This document is property of Tema Telecomunicazioni, It is forbidden any duplication and reproduction, even partial, as well as storage on any medium without written permission of Tema Telecomunicazioni.

This symbol in the descriptions indicates a general warning or a damage danger

to equipment or people.

This symbol in the descriptions indicates us

eful information or a suggestion for

the optimization of the device functionality.

TEMA TELECOMUNICAZIONI

VoIP SIP 12W PoE Speaker AD635

MAS-AD635-REV00EN Page 4 of 46

1. PRESENTATION ........................................................................................................................................ 5

2. FEATURES .................................................................................................................................................. 7

3. PACKING LIST ........................................................................................................................................... 7

4. TECHNICAL SPECIFICATIONS ............................................................................................................... 8

5. OPERATION ................................................................................................................................................ 9

5.1. D

EVICE CONNECTION DIAGRAMS

..........................................................................................................................9

6. OPERATING MODES............................................................................................................................... 10

6.1. C

ALLS TO DEVICES

........................................................................................................................................... 10

6.2. RELAY

FUNCTION

........................................................................................................................................... 10

6.3. C

ALLS GENERATED FOR ACQUISITION OF EXTERNAL CONTACTS FOR SPECIAL SIGNALINGS

........................................ 10

6.4. M

ULTICAST AUDIO STREAMING

......................................................................................................................... 11

7. COMMANDS AND CODES...................................................................................................................... 11

8. INSTALLATION OF THE DEVICE .......................................................................................................... 12

8.1. M

OUNTING AND POSITIONING OF THE

AD635

SYSTEM

.......................................................................................... 12

8.2. A

CCESS TO INTERNAL PARTS - CABLE ROUTING

................................................................................................... 12

8.3. C

ONNECTING THE

AD635 I

NTERNAL MODULE

..................................................................................................... 13

8.4. C

ORRECT CONNECTION OF AN ADDITIONAL PASSIVE SPEAKER

.............................................................................. 15

8.5. 100V

AUDIO LINE FOR ADDITIONAL SPEAKERS AWAY FROM

AD635 IP S

PEAKER

..................................................... 16

9. PROGRAMMING ...................................................................................................................................... 17

9.1. P

REPARATION FOR THE SYSTEM PARAMETERS PROGRAMMING

.............................................................................. 17

9.2. A

CCESS TO PROGRAMMING

............................................................................................................................... 19

9.3. N

ETWORK PARAMETERS

................................................................................................................................... 20

9.4. SIP P

ARAMETERS

........................................................................................................................................... 21

9.5. G

ENERAL PARAMETERS

.................................................................................................................................... 22

9.6. S

ET OF THE OPERATING MODE

.......................................................................................................................... 23

9.7. R

ELAY AND ALARM INPUT SETTINGS

................................................................................................................... 24

9.8. C

AMERA

......................................................................................................................................................... 25

9.9. C

ALL BUTTONS

................................................................................................................................................ 26

9.10. M

ESSAGES MANAGEMENT

........................................................................................................................... 27

9.11. C

ALLS REPORT

.......................................................................................................................................... 29

10. MAINTENANCE ........................................................................................................................................ 30

10.1. S

YSTEM

.................................................................................................................................................... 30

10.2. L

OGIN CREDENTIALS

................................................................................................................................... 31

10.3. D

IAGNOSTIC LOGS

...................................................................................................................................... 31

11. PRESENTATION AND USE OF THE "AA Video Console" SOFTWARE ........................................ 32

11.1. P

RESENTATION

.......................................................................................................................................... 32

11.2. S

OFTWARE CONFIGURATION FOR

SIP S

ERVER MODE

..................................................................................... 33

11.3. S

OFTWARE CONFIGURATION FOR PEER-TO-PEER MODE

................................................................................. 34

12. Introduction to AA-Video Console APP version for operating systems iOS ............................... 35

12.1. D

OWNLOADING AND INSTALLING THE APP

...................................................................................................... 35

12.2. U

SING THE APPLICATION

............................................................................................................................. 37

13. Introduction to AA-Video Console APP version for ANDROID systems ...................................... 37

13.1. D

OWNLOADING AND INSTALLING THE APP

...................................................................................................... 37

13.2. U

SING THE APPLICATION

............................................................................................................................. 39

14. APPENDIXES ............................................................................................................................................ 41

14.1. A

PPENDIX 1: OTHER EXAMPLES OF MULTICAST AUDIO STREAMING APPLICATIONS

............................................. 41

14.2. A

PPENDIX 2: USE OF THE

VLC M

EDIA PLAYER SOFTWARE AS A MULTICAST ENCODER FOR AUDIO FILES

.............. 43

14.3. A

PPENDIX 3: USE OF THE

AUDACITY

SOFTWARE FOR AUDIO FILES RECORDING

............................................... 44

14.4. A

PPENDIX 4: CABLING OF A

UTP RJ45

NETWORK CABLE ACCORDING TO THE STANDARD

EIA568B..................... 45

TEMA TELECOMUNICAZIONI

VoIP SIP 12W PoE Speaker AD635

MAS-AD635-REV00EN Page 5 of 46

1. PRESENTATION

AD635 allows to realize Paging Amplification Audio Sound Systems in a standard LAN network completely integrating with IP-PBX SIP in order to be able to play announcements from any telephone in the internal network and any technologies: analog, SIP, Smartphones and Softphones.

Access can be authorized by Password with code to be typed before starting the announcement. Two internal relays can be programmed to be automatically activated when it is called or to be controlled from the phone via LAN that originated the call to the AD635 speaker, eg. to report the event to any auxiliary devices connected downstream.

The system programming is done remotely via LAN thanks to the integrated Web server. AD635 incorporates an efficient Class-D 10W (2x5W) amplifier.

2nd SIP Account – Night Ringer. AD635 can be registered on the PBX with a second telephone number, different from the one used for ads and inserted in the night ring group. To the arrival of an incoming call, the system plays a sound (user selectable) to all the network speakers. The volume can be adjusted independently of the others managed audio channels.

Inputs from external contact with a variety of functions, for example: provide to make a SIP call to a preprogrammed number and inform the operator of the event with an appropriate voice message. The signaling can be repeated a number of programmable times, the operator can interrupt the sequence with a keyboard code. Other examples of use will follow in this manual.

Multicast Audio Streaming for music and announcements diffusion. AD635 handles up to 5 multicast channels in LAN with priority levels to allow the background music broadcasting on loudspeakers network. The generation of musical programs in streaming audio can be managed from a PC of the LAN/WAN network with special software or special TEMA Encoder.

Service "SIP Security Info Call" - Emergency SIP Call. By connecting a button or an external contact, AD635 can call a phone number programmed to alert the event with a specific warning message. It is a security service for emergencies or simple request for help and information, and allows a one-way phone call.

Total remote management via LAN, integrated Web Server. Programming, configuration, loading and listening to audio files, firmware release update, audio volume adjustment, backup and restore the configuration, device reboot.

Possibility to connect one or more external passive loudspeakers on the 2nd amplifier to expand audio coverage of the served area.

AD635 can be powered with an external power supply, or only from the LAN cable via PoE, the two power sources can coexist.

Tested with most popular

PBX brands:

SIEMENS - AVAYA - ALCATEL – PANASONIC – SAMSUNG - NEC -

WILDIX - AASTRA - ASCOM - VT NITSUKO - SELTA – PHILIPS

TEMA TELECOMUNICAZIONI

VoIP SIP 12W PoE Speaker AD635

MAS-AD635-REV00EN Page 6 of 46

VoIP SIP Amplifiers-Speakers Products and Accessories of the AD600

“SipComStage”

series

AD610

2X2W PoE IP-

SIP Amplifier Module,

External Amplifier Adapter with Sound Isolation

Transformer. Directly p

ilot external power

amplifiers or 8 Ohm external passive speakers.

AD611

IP-

SIP PoE 10W Amplifier Module

(2X5W). Directly pilot 8 Ohm external passive

speakers.

AD633

IP-SIP speaker 12W PoE

ceiling mount version.

AD635

IP-

SIP PoE 12W speaker for wall

mounting with the poss

ibility of integrating a PoE

injector adapter.

AD333/12XTP

Passive 8 Ohm 12W

speaker with anti-flame cover (AD333/1

2TP

without cover), internal transformer for 100V

audio line. Ideal for connecting to AD610-611-

612

or as 2nd speaker to the AD63x series IP-

SIP

speakers.

AD335/06TP

Passive 8 Ohm 6W speaker

with 100V audio line transformer. Ideal for

connecting to AD610-611-

612 or as 2nd speaker

to the AD63x series IP-SIP speakers.

AD330/25T

Passive horn speaker 25W 8

ohm with transformer for 100V audio line. Ideal

for connecting to the AD610-611-

612 modules or

as 2nd speaker for AD63x IP-SIP speake

series.

AD330/xx

Are available Speakers of

different pow

er, Horns and Loudspeakers for

flush and ceiling mount.

AA-39DL

Plug Power Supply 220Vac/12Vdc-1,0A.

AA-39D1A

DIN Power Supply 220Vac/15Vdc-1,0A.

AA-

39P4

PoE injector 230Vac/48Vdc 0,5A.

AA-39E3 /

E6V

DIN Power Supplies 220Vac/24Vdc-1,5A 220Vac/24Vdc-2,5A.

AA-36

Protected Power Relay

Actuator 250Vac/16A/4KVA, command in

AC/DC 12V/24V, 1 contact, Led, contacts

protected by electric arcs.

Ideal for

driving loads up to 4.000W.

AD612

IP-

SIP PoE 40W (2x20W) Amplifier

Module when powered with an external power

supply.

Directly pilot 8 Ohm external passive

speakers.

AA-697xxx

Flash lights with Xeon

lamp or high brightness LE

Ds. Ideal to be

controlled by the relay of the IP-

SIP

speakers of the AD630 series or by the

IP-

SIP amplifier AD610, AD611, AD612

modules, with a call in progress add a

light signal to the acoustic signal.

AD320/30

PA 100V audio line

transfo

rmer 30W, constant voltage, high

efficiency toroidal type with low magnetic

flux leakage.

AD32

Isolation transformer, balanced,

mixer, attenuator, audio signal filter, low

impedance output. Ideal fo

r decoupling

devices of audio sources to other

amplifiers to eliminate noises.

AD615/S

Audio Encoder Module from

analog to digital on LAN Network in

Multicast/Broadcast Channels.

AD301R

30W analog amplifier,

2 channels, Volume-High-Low +/-

12dB

controls

AD630

IP-

SIP PoE 25W Horn Speaker

with 40W internal amplifier (2x20W) IP65

protection.

AD633C

SIP IP-12W

PoE Speaker ceiling

mount version with IP54 flameproof cover.

TEMA TELECOMUNICAZIONI

VoIP SIP 12W PoE Speaker AD635

MAS-AD635-REV00EN Page 7 of 46

2. FEATURES

•

IP 10W PoE Speaker for indoor installation.

•

Possibility of housing an optional power supply PoE injector module

•

Audio output power 10W (2x5W)

•

Possibility to register a second SIP account for the "Night Ringer" feature

•

5 RX Multicast Channels for Music/Ads/Messages diffusion with 5 priority levels

•

2 remote controlled relays via LAN

•

1 multifunction input from external contact

•

Possibility of playing a pre-recorded announcement, associated with the available input, or up to 6 announcements by making a call and sending the respective code via telephone

•

Notification service with dedicated messages following external event

•

2 buttons inputs for direct call to SIP numbers differentiated by communication/alert

•

“SIP Security Info Call” warning/emergency telephone call, sending of pre-recorded messages on loudspeakers and on the called

•

"Push to Talk" function to control the direction of communication from an external button (Not included)

•

Independent adjustment of audio volumes: communications, multicast, night ringtone, alert tones

•

SD memory card with audio files from 16sec. customizable by the user (opt. up to 960min. - 16h audio)

•

Great versatility with ease of use and programming

•

VoIP connection with standard SIP Proxy Server protocol

•

Compatibility with all IP-PBX of the most prestigious brands

•

P2P (Peer to Peer) for operation also without IP-PBX

•

Power supply via PoE (Power over Ethernet) with a single UTP cable or external power supply, also at the same time

•

Free APP developed for smartphones/tablets with iOS and Android operating systems

•

AA-Videoconsole software for Windows XP/7/10 PC for management of TEMA IP terminals included

•

Programming via dedicated Web Interface with password protection

•

Possibility of software / firmware update via LAN

•

Integration with the local LAN, 100BaseT Ethernet LAN port with RJ45 connector

•

Integrated PoE 802.af, one UTP cable for connection

•

Dimensions 225 x 215 x 120 mm (H x W x D)

•

Wall mounting inside industrial buildings, corridors, large offices, etc.

3. PACKING LIST

The systems are supplied with the parts included in the following list:

•

One speaker device code AD635

•

A printed system documentation, installation, programming, use manual

•

A CD-ROM with complete documentation

TEMA TELECOMUNICAZIONI

VoIP SIP 12W PoE Speaker AD635

MAS-AD635-REV00EN Page 8 of 46

4. TECHNICAL SPECIFICATIONS

LAN

TCP/IP Network 10/100BaseTx

Protocol

SIP 2.0, RFC 3261

RTP Multicast audio Streaming

G.711 a

Law, µ

Law

Connection

SIP Server (IP

PBX) o

r P2P (Peer To Peer)

Power Supply

PoE, PoE Injector and/or

external

Ac/Dc

power supply

PoE

802.3af class

0 12,95W

PoE injector optional module

possibility

Optional

, model

that can be

directly housed in

to AD635

External Power Supply

(Opt.) 230Vac / 12

-15Vdc -1A, 24Vdc

- 2A

Tec

hnology

IMX25 400MHz

Microprocessor

Memory

256MB Ram, Micro

SD Flash 2GB

Programming

practical Web interface and password

APP

for Smartphones

iOS, Android

Messagges/S

unds

prerecorded in the internal SD memory card

Audio File Format

Wind

ows .wav

– 8K –

16 bit

Duration

16sec each

. Standard (Option up to 960 min.

16H audio)

Bandwidth

180Hz

– 16KHz

Power

Class

D 10W

(2x5W)

amplifier

ound pressure

100dB A (SPL)

ispersion angle

110° @ 2KHz

Audio communication

Unidirectional / Bidirectio

nal / Push to Talk

Internal Microphone

Omni

directional electret 30Hz

18KHz

dditional speaker output

1 output for external speaker, passive

, impedance 8 Ohm

utomatic

heck mode

Through self audio feedback

Inputs from buttons

or external contacts

2 for

buttons + 1 for warning

/alarm

Integrated relays

elay contacts

apacity

max 30Vdc

– 1,5A

Signalings

Active call Led, call tone, Ding

dong ads

Installa

ion

Wall mount

Housing M

aterial

ABS

Storage temperature

From

-20° to

+65°C

Operating temperature

From

20° to

+55°C

Relative humidity

Up to 90% non

condensing

Dimensions

218

x 216 x 120 mm

(H x W x D)

Weight

1,1 Kg (1,4 Kg with PoE injector module)

arrant

y 2 years, possibility of extension (

ption)

Compatibility

CE, ROHS

Call in

progress

Led

Microphone

TEMA TELECOMUNICAZIONI

VoIP SIP 12W PoE Speaker AD635

MAS-AD635-REV00EN Page 9 of 46

5. OPERATION

In stand-by and correctly configured, the system waits for incoming calls. The device allows also the “streaming” Multicast sound diffusion. In this case the RTP audio diffused in LAN will be

played amplified by AD635. Differing from the announce mode on direct call, with multicast mode, more devices can diffuse the same message at the same time, useful for general pre-recorded ads or for music sound diffusion.

The operator who want to make an announcement on the device will make a call, from any extension of the PBX, to the number to which the device is registered or to its IP address in the case of Peer-to-Peer connection.

It is always monitored the change status of an alarm input to which it is possible to associate a number to call and a message to be played to the called party answer. It is possible to make common adjustment of the level output of the speakers to better suit the acoustic characteristics of the served area.

The system can activate a relay contact for signaling to external devices.

5.1. Device connection diagrams

Access Point

IP PBX

ZONE

AD635 IP Speaker

with other passive loudspeakers on a 100V line made by adding an AD320 / 30 transformer

ZONE

AD635 IP

Speaker with relay remote control and call button

“Push To Talk”

call button

Application with IP

PBX or Peer to Peer

Each IP Speaker can be reached from SIP phones, Smartphone and other registered terminals in the IP-PBX that can launch ads. The integrated relay can be operated from the SIP phone that originated the call. With a Network PC with installed the free software TEMA "Videoconsole" it is possible to make calls to IP speakers. If the free sofware "VLC" is also installed, it will possible to send on Streaming Audio speakers multicast channels, interrupted by ads as background music. In each AD600 series speaker, it is possible to independently adjust the audio volume reproduced via LAN thanks to the integrated web server.

IP SIP Phone

Network PC

Smartphone

with

TEMA APP

Analog

Audio

IP PBX

Access Point

IP SIP Phone

Network PC used as a

multicast control

station with VLC

Smartphone with

TEMA APP

Zone 1 Zone 2

Zone 3

TEMA

AD615/S

Mini Encoder

Multicast Audio Streaming for sound diffusion

Each AD635 is accessible from IP-PBX registered SIP phones and smartphones that can launch an advertisement. With the help of an encoder TEMA AD615 it is possible to stream music on multicast channels managed by AD635, the music is taken in analogue audio from the PC (or any audio player) and sent to the Encoder that will redistribute on the LAN. The announcement from a SIP call to a specific AD635 device will stop the music that will be automatically restored at the end.

AD635

TEMA TELECOMUNICAZIONI

VoIP SIP 12W PoE Speaker AD635

MAS-AD635-REV00EN Page 10 of 46

6. OPERATING MODES

6.1. Calls to devices

Call from the PBX phones to the AD635 system allows to make announcements to the network speaker. However, it is a normal telephone call, typically unidirectional although AD635 makes possible to hear the sound present in its vicinity, being equipped with an internal microphone. Calling the extension number connected to the systems, they will answer after a set time. It is also possible to have an appropriate code to protect the function from unauthorized access. Hang up to end the announcement. Any background music will be automatically restored after some seconds.

6.2. RELAY function

The relays are typically used to signal to any auxiliary external devices that the announce is played, automatic activation call per call. If not used for the function described above it is available and can be controlled with an appropriate code from the caller's telephone.

6.3. Calls generated for acquisition of external contacts for special signalings

Are the calls that the system generates on his line to alert after triggering the alarm by the equipment input contact connected (aux devices or a button available to users in the proximity of the device). At the answer it is played to the called a pre-recorded message. It is possible to assign a phone number or an IP address that will be called when the input is activated. It is possible to determine the activation status of the same. It is the closure of the external contact that triggers the sequence of signaling but it is also possible to reverse this logic, in this way the signaling can take place after the opening of the contact (normally closed) connected to the input.

AD635 continuously monitors the status of the contact in the event of the condition of the activation stored on nonvolatile memory card. As soon as possible it will begin to call the person who will manage the situation found at the telephone number programmed reproducing the message associated with the event. It is also possible to choose to play on a local speaker and on any connected audio output a pre-recorded message, which will be played prior to the call to alert the present persons in the area served by the system detected event. It is possible to define an acquisition/silencing code of alarm signaling that the called must type to inform the device of the alarm acknowledgment. If the called number is busy or does not reply, or in any other case where AD635 does not receive the capture/acknowledgment code, at the end of each call attempt return in standby and prepares itself for a new alarm notification

When the systems receive the correct acquisition/acknowledgment code related to the alarm in progress, the alter signaling will stop and will not be carried out further alarm notification calls. In order to be ready again, it is necessary that the condition which had triggered the previous notification returns in standby. Only at the occurrence of a new activation of the contact condition the calls cycle with the alert notification will start again. In practice: if a connected contact is closed and it is detected its activation, AD635 starts to make warning calls.

In the event that the person called by the system answers and successfully enter the acknowledge code, the alert calls will be terminated. If the contact that had triggered the alert, however, remained closed (this obviously depends by the external device that controls the contact) will NOT be triggered another warning cycle! To have new alerts for this contact, it is necessary that come back in standby before (reopening) and then to its new next possible closure will be detected from AD635 system with new telephone alerts.

TEMA TELECOMUNICAZIONI

VoIP SIP 12W PoE Speaker AD635

MAS-AD635-REV00EN Page 11 of 46

6.4. Multicast Audio Streaming

In a LAN network, the Multicast term indicates the possibility to distribute an information like data, audio or video, to a group of IP terminals of the Ethernet network. For Multicast are used class D IP addresses and they range from

224.x.x.x to 239.x.x.x. In our case the AD635 system is able to receive audio in Multicast into the specific IP channel and play it amplified. The audio can be generated from a PC software application (for example VLC) or by a IP SIP phone. The received audio stream is played without the intervention of any operator, this function is useful for playing back voice messages and information or emergency announcements (also called "Paging" mode). Obviously the Multicast audio streaming is unidirectional, the audio stream is sent from source to destination, but not vice-versa. The audio stream can be sent simultaneously to multiple terminals (same IP Multicast), or only to distinct terminals (each provided with its own IP address). It is possible to program up to 5 receiving addresses of multicast streaming, each with its own priority, so that the same terminal if it is already playing audio (music for example) may be interrupted by a higher priority stream (for example, an advertisement). Audio must be in G.711 format (aLaw or µLaw).

Example 1

In a plant, there are two systems, connected to the same network switch. From a suitable phone, it is possible to make a voice announcement via multicast address 239.255.12.42:

Both systems will play the announcement audio message. Many more devices than those given in the example can be connected, since there are no limits.

Example 2

In the plant there are two systems with different Multicast addresses.

The phone, selecting to send the multicast voice to one or other address of the terminal, will decide which device must play the streaming message.

7. COMMANDS AND CODES

During the announcement will be possible to send the commands described here (which will be these by default):

DTMF Command

Function Description

#1 - #2

Activate the relay contact 1 or 2

Used to manually activate the relays if not programmed to be automatically activated per announcement.

Extension of announcement time

AD635 alert the operator with some tones 30 seconds before the expiration of the time for the announcement. Having to extend the announcement over the set time it is possible to recharge original time to continue the conversation (with this code).

Phone Extension

designed for

Multicast

LAN Switch

AD635

n. 1 Multicast

address

239.255.12.42

AD635 n. 2

Multicast

address

239.255.12.42

Phone Extension

designed for

Multicast

LAN Switch

AD635

n. 1

Multicast

address

239.255.12.42

AD635 n. 2 Multicast

address

239.255.12.41

TEMA TELECOMUNICAZIONI

VoIP SIP 12W PoE Speaker AD635

MAS-AD635-REV00EN Page 12 of 46

8. INSTALLATION OF THE DEVICE

8.1. Mounting and positioning of the AD635 system

The AD635 IP loudspeaker box when mounted will be hanging on the wall. On the upper side of AD635 there is a plastic cord comprising two housings for wall anchors. The distance between the fixing eyelets is 139mm.

To support AD635 it is possible to use robust hook dowels or, always using the provided housings, may be used instead dowels with screw and washer or even threaded screw with lock washers and tightening nuts. In this way the AD635 will be fixed and locked to the wall (unmovable) and not just hanging on the hooks.

Hook dowel

Hook

and washers

Screw hook

and washers

Because of the multiple attachment modes of AD635, no accessory is provided for this purpose. According to the desired mode and the wall, adopt the most suitable material.

8.2. Access to internal parts - cable routing

The AD635 comes with the back of the device opened and allows access to the system components. The arrival of the cables can be achieved via an external conduit to the wall in which case use to enter in AD635

with the cables one of the three slots present on the right, left or bottom of the plastic box.

By providing instead one or more connecting conduits of suitable section (depending on the device and the accessories to be connected) simply provide for the arrival of the conduits exit from the wall, in the central area, the one that will remain covered by the plastic box of the AD635 speaker.

139 mm

TEMA TELECOMUNICAZIONI

VoIP SIP 12W PoE Speaker AD635

MAS-AD635-REV00EN Page 13 of 46

8.3. Connecting the AD635 Internal Module

Once the AD635 box has been fixed, it is necessary to make the connections necessary for its operation before it will be permanently fixed.

Inside the AD635 there is an electronic module for managing the communication functions on the VoIP network and for amplifying the audio signal. Connection of the signal cables from the field must be carried out by qualified technicians, working by checking that no cables are under tension, and also observe the voltage and current values for power supplies and other parts of the system.

Follow the instructions in the block diagram for the correct electrical connection of the system. Below is detailed each shown terminal block.

SP1+

9 (2nd Speak

SP1- 8 K1.NC 7 (Relay 1) K1.CC 6 K1.NA 5 K2.CC 4 (Relay 2) K2.NA 3 GND 2

ING1 1 (In

put 1)

9 8 7 6 5 4 3 2 1

Power supply

input terminals

“C” “A”

C A

RJ45

LAN cable

P2 4

GND 3 GND 2

P1 1

3 2 1

Connector for external buttons P1 and P2

Microphone

and led housing

Electronic

Module

Optional integrable PoE module

TEMA TELECOMUNICAZIONI

VoIP SIP 12W PoE Speaker AD635

MAS-AD635-REV00EN Page 14 of 46

4-pin removable terminal block (screw connector inserted to the electronic module)

+Vout

Terminal block from which it is possible to withdraw unregulated power supply, POSITIVE

GND

Terminal block from which it is possible to withdraw unregulated power supply, NEGATIVE

Terminal block to power the system, irrelevant polarity

RJ45 LAN port (present on the electronic module)

AD635 requires a LAN cable to connect to the network. If the port cable has also PoE, it will not be necessary to supply the module with other power sources (up to max 10W powers). For higher powers will be necessary to supply the module with other power source of 24 Vdc 2A or max 18Vac 2.5A.

9-pin removable terminal block (screw connector inserted to the electronic module)

9 SP1+

Class-D amplifier 1st output terminal block for connection of a speaker, positive pole

8 SP1-

Class-D amplifier 1st output terminal block for connection of a speaker, negative pole

7 K1.NC

Terminal block of the K1 relay - NC contact, normally closed

6 K1.CC

Terminal block of the K1 relay - CC contact, central contact (contact load max 30V 1.5A)

5 K1.NA

Terminal block of the K1 relay - NO contact, normally open

4 K2.CC

Terminal block of the K2 relay - CC contact, central contact (contact load max 30V 1.5A)

3 K2.NA

Terminal block of the K2 relay - NO contact, normally open

2 GND

Terminal block referred to the negative of the system power supply, for the alarm contact

1 ING1

Terminal block for the detection of the external alarm contact

4-pin removable terminal block (connector inserted to the electronic module)

Connect here the dry contact of the button named P1

GND

Reference terminal of the P1 button contact

GND

Reference terminal of the P1 button contact

Connect here the dry contact of the button named P2

At the "+Vout" output there is a + 12Vdc voltage when the device is powered via PoE, otherwise, at

this output the voltage will be the same as at the terminals A-C. The use of "+Vout" is permitted as long as it is not exceeded a maximum 200mA current consumption and the load has a protection on the input current. Improper use of this output will permanently damage the unit.

Devices powered via PoE (Power over Ethernet) may only be connected with cables coming from

inside the building, they are not allowed connections to LAN cables coming from outside the building.

To terminals 1 (INP1) and 2 (GND) must only be connected a relay contact or a button free from any

voltage to prevent permanent damage to the device.

To terminal

s 1 (P1) and 2 (GND

) / 4 (P2) an

d 3 (GND)

must only be connected a relay contact or a

button free from any voltage to prevent permanent damage to the device.

+ 32 hidden pages

Tema Telecomunicazioni AD635 Product Manual

Specifications and Main Features

Frequently Asked Questions

User Manual