TelVue® TeleCast™ – HD & SD
TeleCast™ SD Video and Audio Input Connectors
Getting Started
1
2
3
4
5
Plug In A Keyboard, Monitor And Mouse
Configure Networking
Plug in LAN to Ethernet [0]
Set your ip address through the Windows operating system. Please refer to the back
page for more details.
Plug In Video & Audio Inputs
Plug in your video and audio inputs per the connection diagrams.
Configure Streaming
If not already installed, use the shortcut on the desktop to download and install Adobe®
®
Flash
Media Live Encoder. The TelVue® TeleCast™ may already contain a profile with
your provisioned ingest point. If it does not, you can configure one yourself or contact
®
Technical Support for help. To configure the profile yourself, refer to the
TelVue
complete documentation at: http://www.telvue.com/support/telecast
Multi-Rate Feature
If multi-rate, Adaptive Bit Rate Streaming is enabled for your organization, contact the
®
TelVue
Technical Support team as this requires additional configuration.
TeleCast™ HD Video and Audio Input Connectors
HDMI 4:2:2 Output
Breakout Cable
HDMI 4:2:2 Input
Ethernet [0] Ethernet [1]
Breakout Cable
S-VHS Connector
To use for S-VHS in, connect the:
S-VHS green connector to the breakout cable #8 Y in green connector
S-VHS blue connector to the breakout cable #9 B-Y in blue connector
4
8
7
10
5
9
3
Digital Audio Output - AES/EBU Out
X
Analog Video Output - Y Out
Analog Video Input - Y In
Analog Video Input - R-Y In
Genlock
HD-SDI Out
HD-SDI In
BNC Connector
Deck Control - Not Used
Powering IP Broadcast™
Analog Audio Input- Audio In Left
16000 Horizon Way, Suite 500
Mount Laurel, NJ 08054
800.885.8886
www.telvue.com/support
Analog Audio Output
Audio Out Left
Toll Free: 800-885-8886
Email: support@telvue.com
APIs: http://www.telvue.com/api
13
12
15
Analog Video Input - B-Y In
Analog Video Output - R-Y Out
Analog Audio Output - Audio Out Right
14
Analog Audio Input
Audio In Right
Support Portal: Http://www.TelVue.com/support
Training Videos: Http://www.TelVue.com/training
Analog Video Output - B-Y Out
QSG_TC_05_12_V3
Configure Networking
While there are many ways to navigate to the IPv4 Properties in Windows 7, here is a quick way to get there:
Getting Started
TelVue® TeleCast™ – HD & SD
Click on the networking icon in the
system tray.
1
Here you can set a static IP or select to
use DHCP
5
2
6
Click on "Local Area Connection" in
the Connections section
Click Ok, then Close twice (for the
two property dialog boxes still
open), then close the Network and
Sharing Center
3
Click on the Properties button in the
dialog that opens up
What’s Next
Select "Internet Protocol Version 4"
and then click the Properties button
4
Powering IP Broadcast™
16000 Horizon Way, Suite 500
Mount Laurel, NJ 08054
800.885.8886
www.telvue.com/support
To learn how to edit the encoding profile, set a different profile to be used when the machine
restarts, or see what profile is running, read the full documentation at:
http://www.telvue.com/support/product-documentation/telecast.
If you have any questions or need further assistance, please contact technical support at
support@telvue.com.
Toll Free: 800-885-8886
Email: support@telvue.com
APIs: http://www.telvue.com/api
Support Portal: Http://www.TelVue.com/support
Training Videos: Http://www.TelVue.com/training
QSG_TC_05_12_V3
Loading...