TELUS i335 User Manual

Download

Page 1

TELUS

i335 Mike Phone

User’s Guide

Page 2

DECLARATION OF CONFORMITY

Per FCC CFR 47 Part 2 Section 2.1077(a)

Responsible Party Name: Motorola, Inc. Address: 8000 West Sunrise Boulevard

Plantation, FL 33322 USA Phone Number: 1 (800) 453-0920

Hereby declares that the product: Product Name: i335 Model Number: H98XAH6JR5AN Conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a),

15.107(d) and section 15.109(a) Class B Digital Device As a personal computer peripheral, this device

complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Page 3

HELLOMOTO

On/Off/Home

Key

PTT Button

Audio Jack

Volume Keys

Speaker beneath

keypad

USB Connector

Internal Antenna

located here

Speaker Key

Microphone

beneath keypad

Left Soft Key

Perform function

in lower left

display.

Talk Key

Make &

answer calls.

Menu Key

From home screen,

open main menu.

4-Way

Navigation Key

Right Soft Key

Perform function in lower right display.

Power/Home/End Key

End calls, exit menu system.

OK Key

In menus & lists, press to select highlighted option.

Introducing your new Mike i335 phone. Here’s a quick anatomy lesson.

Page 4

check it out

up, down, left or right ( )

Customizable

key

to open the

Settings

screen

Press and hold the

Power Key

for a few seconds, or until the screen lights up, to turn on your

phone.

Press the

key

to select.

Press the Navigation Key

to highlight a menu feature.

Home Screen

Main Menu

that can be used

Exit

Main Menu

Page 5

Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196

www.hellomoto.com

1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada)

Product Support:

www.motorola.com/iden

Certain mobile phone features are dependent on the capabilities and settings of TELUS’s network. Additionally, certain features may not be activated by TELUS, and/or TELUS's network settings may limit the feature’s functionality. Always contact TELUS Client Care about feature availability and functionality. All features, functionality, and other product specifications, as well as the information contained in this user's guide are based upon the latest available information and are believed to be accurate at the time of printing. Motorola reserves the right to change or modify any information or specifications without notice or obligation.

This device supports Bluetooth 1.2 and HS/HF/OPP/DUN/BPP profiles. In order for Bluetooth devices to communicate with one another, they must utilize the same Bluetooth profile. To determine the profiles supported by other Motorola devices, visit www.hellomoto.com/bluetooth. For other devices, contact their respective manufacturer.

Certain Bluetooth features including those listed may not be supported by all compatible Bluetooth-enabled devices, and/or the functionality of such features may be limited in certain devices, or by certain wireless carriers. Contact your wireless carrier about feature availability and functionality.

Caution:

Changes or modifications made in the radio phone, not expressly approved by Motorola, will void the user's authority to operate the equipment.

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. Java and all other Javabased marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.

Page 6

contents

check it out . . . . . . . . . . . . . . . . . 2

menu map . . . . . . . . . . . . . . . . . . 6

Use and Care. . . . . . . . . . . . . . . . 8

essentials . . . . . . . . . . . . . . . . . . 9

about this guide . . . . . . . . . . . 9

SIM card . . . . . . . . . . . . . . . . 10

battery . . . . . . . . . . . . . . . . . . 10

turn it on & off . . . . . . . . . . . 14

make phone a call . . . . . . . . 15

answer phone a call . . . . . . 15

make a private call . . . . . . . 15

answer a private call . . . . . 17

store a phone number or

private ID . . . . . . . . . . . . . . . 17

call a stored phone

number or private ID. . . . . . 18

your phone number

and Private ID . . . . . . . . . . . 19

text messages . . . . . . . . . . . 19

using your handset

as a modem . . . . . . . . . . . . . 23

contents

accessories. . . . . . . . . . . . . 25

for more information . . . . . 25

main attractions . . . . . . . . . . . 26

PTV features . . . . . . . . . . . . 26

one touch PTT. . . . . . . . . . . 31

PT manager . . . . . . . . . . . . . 32

Mike’s wireless

web services. . . . . . . . . . . . 32

bluetooth

basics . . . . . . . . . . . . . . . . . . . . 39

display . . . . . . . . . . . . . . . . . 39

text entry . . . . . . . . . . . . . . . 40

volume . . . . . . . . . . . . . . . . . 43

navigation key. . . . . . . . . . . 43

handsfree speaker . . . . . . . 43

transmitters . . . . . . . . . . . . . 43

use GPS with

map software . . . . . . . . . . . 44

calls. . . . . . . . . . . . . . . . . . . . . . 47

recent calls . . . . . . . . . . . . . 47

redial. . . . . . . . . . . . . . . . . . . 48

. . . . . . . . . . . . . . 35

voice name . . . . . . . . . . . . . 48

caller ID. . . . . . . . . . . . . . . . 49

call forward . . . . . . . . . . . . 49

emergency calls . . . . . . . . 50

international calls . . . . . . . 50

speed dial . . . . . . . . . . . . . . 51

turbo dial . . . . . . . . . . . . . . . 51

voice mail . . . . . . . . . . . . . . 52

net alerts . . . . . . . . . . . . . . . 53

Mike’s Talk Around

customize. . . . . . . . . . . . . . . . . 60

ring tones . . . . . . . . . . . . . . 60

wallpaper . . . . . . . . . . . . . . 61

backlight . . . . . . . . . . . . . . . 61

datebook . . . . . . . . . . . . . . . 62

hide or show location

information . . . . . . . . . . . . . 62

other features . . . . . . . . . . . . . 64

advanced calling . . . . . . . . 64

contacts . . . . . . . . . . . . . . . 65

datebook . . . . . . . . . . . . . . . 65

. . . . 53

Page 7

GPS . . . . . . . . . . . . . . . . . . . . 66

handsfree . . . . . . . . . . . . . . . 67

personalize . . . . . . . . . . . . . . 68

pc applications . . . . . . . . . . 68

TTY . . . . . . . . . . . . . . . . . . . . . 68

security . . . . . . . . . . . . . . . . . 69

Safety and General

Information . . . . . . . . . . . . . . . . 72

Service & Repairs . . . . . . . . . . 77

Specific Absorption

Rate Data . . . . . . . . . . . . . . . . . . 78

Motorola Limited Warranty for the United States and

Canada . . . . . . . . . . . . . . . . . . . . 80

Hearing Aid Compatibility . . . 85 Information From the

World Health Organization . . 87 Patent and Trademark

Information . . . . . . . . . . . . . . . . 89

Privacy and Data Security . . . 90 Smart Practices

While Driving . . . . . . . . . . . . . . 91

Index. . . . . . . . . . . . . . . . . . . . . . 93

contents

Page 8

main menu

Browser

Java Apps.

Messages

• [Create Message]

•Voice Mail

• Inbox

•Drafts

• Sent Items

• Net Alert

Shop

Contacts

• [New Contact]

Call Alert

Ring Tones

• Vibrate All: On/Off

• Ringer

• Vibrate

• Silent

Settings

• (see next page)

menu map

Call Timers

Recent Calls

Profiles

My Info

•My Name

• Line 1

• Line 2

• Private ID

• Group ID:

• Carrier IP

• IP1 Address

• IP2 Address

•Circuit Data

Datebook

VoiceRecord

Call Forward

GPS

• Position

• Privacy

• Interface

•

Shortcuts

•[New Entry]

• 1)Shortcuts

• 2)Cntcs[New Contact]

• 3)Recent Calls

• 4)Contacts

• 5)Datebook

• 6)Messages

•7)VoiceRecord

•8)Browser

• 9)Call Forward

Memo

Talk Around

PT Manager

• Send Picture

• Send Event

• Send My Info

• Send Contact

• Configure

My Pictures

Bluetooth

• Hands Free

• Link to Devices

• Device History

• Setup

• Find Me

This is the standard Main Menu layout. Your phone’s menu may be a little different.

Page 9

settings menu

Display/Info

• Wallpaper

• Text Size

• Theme

• Home Icons

• Backlight

•Clock

• Menu View

• Large Dialing

• Language

Phone Calls

• Set Line

•Any Key Ans

• Auto Redial

• Call Waiting

• Auto Ans

• Minute Beep

• Call Duration

• TTY

• Notifications

• DTMF Dialing

• Prepend

2-Way Radio

• Tkgrp Silent

•Tkgrp Area

• One Touch PTT

• Alert Type

• On/Off PTT

• Store Rcvd Info

Personalize

• Menu Options

•Up Key

• Down Key

• Left Key

• Right Key

• Center Key

• Left Sftkey

• Right Sftkey

• Power Up

Volume

• Line 1

• Line 2

• Messages

• Earpiece

• Speaker

• Keypad

• Java Earpiece

• Java Spkr

•Data

Security

• Phone Lock

• Keypad Lock

• SIM PIN

•GPS PIN

• Change Passwds

Advanced

• Alert Timeout

• Headset/Spkr

• Connectivity

• Reset Defaults

• Return to Home

• Transmitters

• Phone Only

• Baud Rate

menu map

Page 10

Use and Care

To care for your Mike phone, please keep it away from:

liquids of any kind dust and dirt

Don’t expose your phone to water, rain, extreme humidity, sweat, or other moisture.

extreme heat or cold cleaning solutions

Avoid temperatures below

-10°C/14°F or above 45°C/113°F.

microwaves the ground

Don’t try to dry your phone in a microwave oven.

Use and Care

Don’t expose your phone to dust, dirt, sand, food, or other inappropriate materials.

To clean your phone, use only a dry soft cloth. Don’t use alcohol or other cleaning solutions.

Don’t drop your phone.

Page 11

essentials

Caution:

time, read the Important Safety and Legal information included in the gray edged pages at the back of this guide.

Before using the phone for the first

about this guide

This guide shows how to locate a menu feature as follows:

Find it: M >

This means that, from the home screen:

Press the menu button M to open the

Main Menu

Press the navigation key to scroll to

Settings.

Press the center key O to select it.

symbols

This means a feature is network/ subscription dependent and may not be available in all areas. Contact TELUS for more information.

This means a feature requires an optional accessory.

essentials

Page 12

SIM card

insert the SIM card

Turn off your phone and remove your battery before you install or remove a SIM card.

Carefully slide the SIM chip into your phone, until it lies flat in the SIM chip holder.

essentials

Warning:

remove your SIM chip from your phone unless absolutely necessary.

To avoid loss or damage, do not

battery

Battery Use & Battery Safety

• Motorola recommends you always use Motorola-branded batteries and chargers.

damage caused by non-Motorola batteries and/or chargers. Caution: Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard. Improper battery use, or use of a damaged battery, may result in a fire, explosion, or other hazard.

•

Battery usage by children should be supervised.

The warranty does not cover

Page 13

•

Important:

Motorola mobile devices are designed to work best with qualified batteries. If you see a message on your display such as

Charge

, take the following steps:

•

Remove the battery and inspect it

Invalid Battery

Unable to

to confirm that it bears a Motorola “Original Equipment” hologram;

•

If there is no hologram, the battery is not a qualified battery;

•

If there is a hologram, replace the battery and retry charging it;

•

If the message remains, contact a Motorola Authorized Service Center.

•

New batteries or batteries stored for a long time may take more time to charge.

• Charging precautions:

When

charging your battery, keep it near

room temperature. Never expose batteries to temperatures below 0°C (32°F) or above 45°C (113°F) when charging. Always take your mobile device with you when you leave your vehicle

•

When storing your battery, keep it in a cool, dry place.

•

It is normal over time for battery life to decrease, and for the battery to exhibit shorter runtime between charges or require more frequent or longer charging times.

• Avoid damage to battery and mobile device.

Do not disassemble, open, crush, bend, deform, puncture, shred, or submerge the battery or mobile device. Avoid dropping the battery or mobile device, especially on a hard surface. If your battery or mobile device has been subjected to such

essentials

Page 14

damage, take it to a Motorola Authorized Service Center before using.

Do not attempt to dry it with an

appliance or heat source, such as a hair dryer or microwave oven.

• Use care when handling a charged battery

: Particularly when placing it inside a pocket, purse, or other container with metal objects. Contact with metal objects (e.g., jewelry, keys, beaded chains) could complete an electrical circuit (short circuit), causing the battery to become very hot, which could cause damage or injury.

Promptly dispose of used batteries in accordance with local regulations. Contact your local recycling center for proper battery disposal.

Warning:

fire because they may explode.

Never dispose of batteries in a

essentials

battery installation

Slide the release button back until it releases the battery door.

Remove battery door.

Insert battery as shown below. Push the battery down until it snaps in place.

Page 15

Replace the battery door.

battery charging

New batteries are not fully charged.

charge using the charger

Pull out the connector cover, and insert the charger into the accessory connector on your phone as shown.

Plug the other end of the charger into the appropriate electrical outlet.

When you charge the battery, the battery level indicator at the upper right of the screen shows charging progress. At least one segment of the indicator must be visible to ensure full phone functionality while charging.

charge from your computer

You can partially charge your phone’s battery by connecting a Motorola-approved USB cable from your phone’s mini-USB port to a high power USB connector on a computer (not a low-power one, such as the USB connector on your keyboard or buspowered USB hub). Typically, USB highpower connectors are located directly on your computer.

Note:

The phone will be charged at a slower

rate than it is charged with the rapid charger.

essentials

Page 16

Your computer must be turned on, and you must have correct software drivers installed on your computer. If the Phone is off when the USB cable is connected between the computer and the phone, the phone will power up in charging mode. This mode allows the phone to charge fastest and quickest.

Note:

If the battery is very low, the phone will not turn On, but it will continue to charge at a low rate. The phone will power up in charging mode when the battery has been charged to approximately 5% of its capacity. For faster charging under a very low battery condition, it is recommended to use the rapid charger supplied with the handset.

If the phone is turned on while charging from a computer, it will not fully charge the battery. In this case, the battery charge will be maintained approximately between 80% and 95% of the battery's capacity. Cables and

essentials

software drivers are available in Motorola

Original

Tip:

protects the battery from damage from overcharging. Of course, unplugging the charger from the wall will prevent the battery from overcharging.

data kits, sold separately.

Motorola batteries have circuitry that

turn it on & off

To turn on your phone, press and hold few seconds or until the display turns on.

To turn off your phone, press and hold two seconds.

Note:

seconds, the handset will power “On” on

for a

If you press E for more than four

for

Page 17

“Transmitter Off” mode. See “transmitters” on page 43.

make phone a call

Enter a phone number and press S to make a call or use a voice name. See “voice name” on page 48.

Note:

For best call quality avoid covering the

internal antenna with your hand. To hang up press

answer phone a call

When your phone rings and/or vibrates, you have the following options to answer:

If you want to answer the call on the handsfree speaker phone, press the speaker key

If you want to hear the audio through the ear speaker, press

If you are using a Bluetooth headset, you can press the answer key on your Bluetooth headset. To hang up press the same key on your Bluetooth.

. To hang up press

make a private call

With Mike’s Direct Connect service, you use your phone as a long-range, digital 2-way radio using one-to-one Private calls or one-tomany group calls.

Your Private ID is the number at which you receive one-to-one Private calls.

Talkgroup numbers are numbers through which you receive one-to-many group calls.

Your Mike sales representative creates Talkgroups for you and assigns each

essentials

Page 18

Talkgroup to a Talkgroup number. You can choose a name for each of your Talkgroups when you create entries for them in Contacts.

to make a Private call

Enter the Private ID you want to call.

Press and hold the PTT button. Begin talking after your phone emits a chirping sound.

Release the PTT button to listen. To end the call press A Private call ends automatically if there is

no activity on the call for a few seconds.

send call alerts

Sending a call alert discretely lets the recipient know that you want to talk to him or her on a Private call.

essentials

When you send a call alert, the recipient’s handset displays your name and emits a series of beeps or vibrations.

The recipient has the following options:

Option

Answer

: Begin a Private call with the sender.

Queue

: Store the call alert to the call alert

queue.

Clear

: Dismiss and delete the call alert.

to send a call alert

Enter the Private ID you want to call as you would when making a Private call.

Press

under

Alert

When the message on the display, press the PTT button until the message

Ready To Alert

Alert Successful:

appears

appears.

Page 19

answer a private call

When your phone emits a chirping sound or vibrates to indicate you are receiving a Private call, wait for the caller to finish speaking.

Press and hold the PTT button and begin talking after your phone emits a chirping sound.

Release the PTT button to listen. To end the call press

receive a call alert

When you receive a call alert, you must answer, queue, or clear it. You cannot receive phone calls or Private calls until you do.

to answer a call alert

Press the PTT button to start a Private call with the sender.

or press

under

Exit

Queue the call allert by pressing

Queue

Clear the call alert by pressing

Clear

under

store a phone number or private ID

You can store a phone number or Private ID in

Contacts

PressM > L >

Enter a name for the new entry. Each entry’s name can contain up to 20 characters.

Select

Ring Tones

specific ring tone to that phone number

[New Contact]

if you wish to assign a

essentials

Page 20

Select a type for the entry (

Work2, Home, Fax, Pager

Private ID, choose

Enter the number for the entry and press

under

Done

Tip:

Before saving the entry, you can save more information. You can store E-mail addresses, IP addresses, or Talkgroup IDs. You can assign each number a speed dial number and voice name. You can also create Contact entries that are groups of Private IDs called Group IDs.

After you have saved the number, the new Contacts entry is displayed.

Private

to save the entry

, or

Mobile, Work1

Other

)

. To store a

call a stored phone number or private ID

Shortcut:

under

From the home screen press a

Contcs

essentials

Find it: M >

Scroll to the

Tip:

name of the taken to all the contact names starting with the letter you pressed.

If the Contacts entry contains more than one number, scroll left or right until the type of the number you want to call is displayed ( etc.).

If you choose a phone number, press S to call the entry.

or If you choose a Private ID, or Talkgroup

ID, press and hold the PTT button to call the number.

Contacts

entry.

By pressing the first letter of the

Contacts

you want, you will be

Mobile, Private, Work1, Work2, Home

Page 21

Tip:

If the Contacts entry you scrolled to contains a Private ID, you can make an instant Private call to that Private ID by pressing and holding the PTT button, even if the Private ID is not the type of number displayed.

your phone number and Private ID

Find it: M >

Tip:

Want to see your phone number or Private ID while you’re on a call? Press

My Info

text messages

Text messaging allows you to send and receive short text messages to and from other Mike handsets. Messages you receive appear on your handset’s display and in the text message inbox.

set it up

Before you begin using text messaging, you may need to set up your signature, service center number, and expiration information.

Shortcut:

under

The following options become available:

option

Signature:

characters long).

Delivery Rpt:

your phone to show you when the message has been delivered.

Srvc Cntr No:

service center. If you do not know this number, contact your service provider.

From the home screen press a

Mesg

> M Scroll to Press M >

Inbox, Drafts

Enter your signature (up to 11

Set this option to On if you want

Enter the phone number of your

Outbox

Text Msg Setup

essentials

Page 22

option

Expire After:

messages you send are saved at the service center if they cannot be delivered. After this period, they are discarded.

Scroll to select the number of days you want your messages to be saved.

Auto Clean Up:

your phone to delete sent messages. If you set

to set the number of days after which sent messages are deleted or the number of messages to be kept.

This is the amount of time

Set this option to On if you want

Auto Clean Up

essentials

to On, select

Clean Up After

option

Quick Notes

text messages that you can create, edit, and send in your text messages. You can store up to 20 quick notes. A quick note may be up to 30 characters long.

You can create a under notes.

Press a under you entered.

: Quick notes are short, pre-written

[New Note]

Edit

to change the pre-written quick

Done

or press a

to save the information

receive a text message

To view the message press a under

To dismiss the message notification press

under

Exit

Note:

If your phone is powered off when you receive a text message, your phone notifies you the next time you power it on. If you are

Read

Page 23

out of your coverage area, your phone alerts you when you return to your coverage area.

Tip:

While reading a text and numeric message that contains a phone number, you can press

to call that number.

read from the message center

From the home screen press a under

Mesg

Inbox

Text Inbox.

Select the message you want to read or press the number of the message you want to read. If the message fills more than one screen, scroll to read it.

Tip:

Scrolling through one message lets

you view the next message.

To reply to the message, press a under

or to see all other choices, including forwarding and deleting the message, calling the sender, or storing the sender’s number in

Contacts

, press M.

create and send text messages

Shortcut:

under

From the home screen press a

Mesg.

Scroll to Press a under Select To address the message use the keypad

to enter the phone number of the person you want to send the message to and press

or Press

Calls

want. Select

message or to use a quick note press under you want.

Inbox, Drafts

[Create Txt Msg]

under

Contacts

Msg

: and enter the text of the

Browse

Outbox

Create.

Browse

, and select

Memo

to find the number you

and scroll to the quick note

Recent

essentials

Page 24

Press M >

Fax, x400, Paging, Email, ERMES

If you want to send the message, press

under

without sending it, press

Note:

of delivery press

Set Send Method

Send

or to delete the message

If you want to request confirmation

and select

, or

Delivery Report

Voice

under

Cancel

> On.

use drafts

When you save a message as a draft, it is saved in the drafts folder.

Shortcut:

under

From the home screen press a

Mesg

Drafts

Text Draft

Select the draft you want to edit. You also have the choice to create new text messages from this menu.

To edit the fields you want to change, follow step 2 through step 5 in “create and send text messages” above.

essentials

Text

resend text messages

Shortcut:

under

From the home screen press a

Mesg

Outbox

Text Outbox

Scroll to the message you want to resend or press the number of the message you want to resend.

Press a under

Resend

delete sent text messages

Shortcut:

under

delete all unlocked sent messages

Shortcut:

under

From the home screen press a

Mesg

Outbox

Text Outbox

Scroll to the message you want to delete. Press a under Press a under

From the home screen press a

Mesg

Press M >

Outbox

Delete All.

Delete

Yes

to confirm.

Text Outbox

Page 25

Press a under

Yes to confirm.

manage memory

Your text inbox, outbox, and drafts folder have a set amount of memory available for storing messages.

The text inbox holds 20 messages. If the text inbox is full, you cannot receive messages until you delete some.

The outbox and drafts folder share memory space. Togheter they can hold 30 messages. If the outbox and drafts folder memory is full, you cannot send messages or save drafts until you delete some.

To view the amount of memory available in your text inbox:

Shortcut:

under

From the home screen press a

Mesg.

Scroll to

Inbox, Drafts

Outbox

Press M >

To view the amount of memory available in your outbox and drafts folder:

Shortcut:

under

Mesg

Scroll to

Press M >

Text Msg Setup > Mem Mtr-Inbox

From the home screen press a .

Inbox, Drafts

Outbox

Text Msg Setup > Mem Mtr-Other

using your handset as a modem

You can use your handset as a modem (Packet Data only) with a laptop, handheld device, or desktop computer. Circuit Data is not supported. In order to use your handset as a modem, you must create a wired or wireless connection between your handset and the other device.

essentials

Page 26

To connect your phone wirelessly, you must have a Bluetooth adapter for the other device. To create a wired connection, use a USB cable.

connect with a USB cable

Use a USB cable to connect your handset to a laptop, handheld device, or desktop computer.

Pull out the connector cover, and insert the charger into mini USB connector on your phone as shown.

Insert the data plug into the data port of the other device.

essentials

connect via Bluetooth

Use your handset as a modem via Bluetooth. The laptop, handheld device, or desktop computer you want to connect to must have a Bluetooth adapter installed.

Check that the adapter is properly installed, and then follow the specific instructions outlined in the device’s user guide to connect the device to your handset.

When used as a modem, your handset is enabled for

Packet Data

transfer mode, which is

used for small file transfers such as email.

Note:

To use these services, you must install the iDEN Wireless Data Services software (available separately). For more information on setting up your computer and your handset for packet data calls, contact TELUS Client Care.

Page 27

accessories

Your handset comes with a battery, and a charger.

To order additional accessories, log on to our Web site contact your Mike Dealer.

www.telusmobility.com

for more information

If you have questions about your handset, contact your Mike Dealer or TELUS Client Care.

essentials

Page 28

main attractions

PTV features

Push To View (PTV) features let you exchange the following items through Private calls with other phones that have this capability:

You can choose to send My Info and contact information to any Private ID.

1. Additional charges may apply.

•

Pictures

•

Datebook events

•

My Info

•

Contact information

main attractions

You can choose to send pictures and events to the Private ID you are engaged in a a Private call with, Private IDs on the list, and Private IDs stored in

When you make or receive a Private call, your phone automatically determines whether the phone you are engaged in a Private call with is able to receive each of these items. Your phone saves this information for as long as the Private ID is on your saved in your saved information each time you make or receive a call to or from that Private ID.

You can turn your phone’s ability to send and receive pictures and events on and off.

Note:

during Talkgroup calls.

Contacts

You cannot send PTT feature items

Recent Calls

. Your phone updates the

Contacts

Recent Calls

list or is

Page 29

send pictures

You can send pictures stored in

Pictures

through Private calls. The picture you send appears on the Private call recipient’s display.

If the recipient accepts the picture, their phone saves the picture.

The first time you send a stored picture after turning the phone on,

Continue?

appears and you are prompted to

respond.

Note:

You cannot make or receive Private

calls while transmitting or receiving a picture.

Picture Fees May Apply.

send a picture during a call

While in a Private call, press a under

Picture

or press M >

Picture.

Use PTT Feature

Send

A list of pictures that can be included in a Private call appears.

Select the picture you want to send.

Press the PTT button to send the picture.

Wait while the picture is transmitted. The Private call is temporarily interrupted while a picture is transmitted.

When prompted, press the PTT button to resume the Private call.

start a call by sending a picture

from My Pictures

Find it: M >

Select the picture you want to send.

Press M > A list of contacts that have Private IDs and

are able to receive pictures appears.

My Pictures

Use PTT Feature

Send Picture

main attractions

Page 30

Select the name of the person you want to send the picture to.

Press the PTT button to send the picture.

When prompted, press the PTT button to resume the Private call.

from the PT Manager:

Find it: M >

Select entries that can receive pictures.

Select the entry containing the Private ID you want to send the message to.

Select the picture you want to send.

Press the PTT button to send the picture.

Once picture has been sent, when prompted press the PTT button to resume the call.

PT Manager

A Contact

main attractions

, or

A Recent Call

Send Picture

to see a list of

receive a picture

When someone sends you a picture, your phone emits a tone or vibrates and a message appears asking if you want to accept the picture.

Pictures you receive are saved to your phone’s memory. They are accessible through

When you see a message asking if you want to accept the picture, press to decline.

Tip:

before it is finished, press

My Pictures

If you want to stop the transmission

Yes

to accept or No

clear a picture from the display

If you want to clear a picture from your phone’s display while still on a call, press >

Clear Screen

Page 31

The picture will not appear on the display again the next time you receive a call from person who sent it. This does not delete the picture from

My Pictures

send events

You can send an event already stored in your phone’s Datebook or create a new Datebook event to send. When you create a new event to send, the event is stored to your Datebook.

While in a Private call, press M >

Feature

Send Event

Note:

If these options do not appear on the context-sensitive menu, the Private ID you are engaged in the Private call with is not able to receive Datebook events.

If you want to create a new Datebook event to send, press create the event.

under

New

Use PTT

and

If you want to chose an event from Datebook, select the event you want to send.

If the event is a recurring event: Select

Event Only

to send only the event selected.

Select

Repeat Events

of the event.

Press the PTT button to send the event.

Note:

Datebook events can also be sent from

the

Recent Calls

list, the

to send all occurrences

PT Manager

or the

send My Info

While in a Private Call press M >

PTT

, and push the PTT button to send.

From the home screen press M >

> M

Send via PTT

button to send.

and push the PTT

This

Datebook.

Send via

My Info

main attractions

Page 32

set my info sending option

You can control what portion of the information in whether it is sent automatically in every call or only when you choose to send it.

Find it: M >

Info to Send

Select or remove the fields you want to send.

Press a under

The information your phone sends always includes

Line 1,

Line 2

sending options.

automatic sending

Find it: M >

Auto Send

When you make a call in which your information is sent automatically, the name

My Info

is sent and

PT Manager

My Name

, and

PT Manager

main attractions

Done

and

Private

Carrier IP

, depending on your

Configure

PTT My Info

. You may also send

Configure

PTT My Info

you entered in the My Name field of My Info appears on the display of the recipient’s phone, even if your name and Private ID are not stored in the recipient’s Contacts.

send contact information

While in a Private Call press M >

Feature

Select

Send Contact

information you want to send.

Push the PTT button to send. or

From the home screen press M >

Manager > Send Contact.

Enter the Private ID number of the person you want to send the Contact information to or press

Select from

and select the contact

under

Browse

Recent Calls, Contacts

, or

Use PTT

Memo

Page 33

Select the contact information you want to send and push the PTT button.

turn PTT features on and off

You can turn your phone’s ability to send and receive messages, pictures, and Datebook events on and off.

You cannot turn your phone’s ability to send and receive My Info and contact information on and off.

Find it: M >

Select

Check or uncheck

Events

On/Off PTT

PT Manager

Configure

Messages, Pictures

and/or

one touch PTT

Find it: M >

PTT.

PT Manager > Configure

One Touch

One Touch PTT

following each time you press the PTT button from the home screen:

option

Off

: Nothing happens when you press the

PTT button from the home screen.

Last Call :

Group on the recent calls list.

Assigned No.:

Enter the number using your keypad, or press

Calls

Note:

number, enter

PT Manager:

manager” on page 32.

Send Picture:

pictures. See “send pictures” on page 27.

sets your phone to do any of the

Call the most recent Private ID or

Call a Private ID you assign.

under

Search.

Select

Contacts, Recent

, or

Memo

If you are entering a Talkgroup

before the number.

Go to PT Manager. See “PT

Go to the first screen to send

main attractions

Page 34

option

Send Event:

Datebook event.

Send My Info:

Info. See “send My Info” on page 29.

Send Contact:

contact. See “send contact information” on page 30.

Go the the first screen to send a

Go to the first screen to send My

Go to the first screen to send a

PT manager

The

PT Manager

features, and other Private call features, from the main menu. You can also set the One Touch PTT feature.

Find it: M >

Select

My Info

PTT item you are sending, select a contact and press the PTT button to send.

lets you quickly access PTT

PT Manager

Send Message, Send Picture, Send Event, Send

, or

Send Contact

main attractions

. After choosing what

Select

Configure

to configure your

Notes

PTT My Info, One Touch PTT

, or

PTT Quick

On/Off PTT

Mike’s wireless web services

Your handset is equipped with a microbrowser that can be used to access Mike's Wireless Web Services and other upto-the-minute information. You can view specially designed text versions of popular Internet sites that provide news, sports, weather, entertainment, stock quote sites, and other useful information.

access the microbrowser

The first time you use the microbrowser, you will be required to go through a security setup process that takes approximately one to three

Page 35

minutes. Please follow the on-screen prompts to complete the security setup process. This setup process will only occur the first time you use the service.

Find it: M >

Once connected, the Homepage (or the last page visited) will be displayed. To access the Home menu page from any other menu in the microbrowser, press

To view additional text while visiting a site, use the navigation key to scroll to read it.

navigate the microbrowser

When you use the microbrowser, some keys on your handset operate differently than

during a normal phone call. These keys are explained below:

* Asterisk/Back key

0 0/+ Next key

Home key

- press to return to the default Home page (the page first seen when you launch the browser). Press and hold for two seconds to exit the browser.

- press to return to the previous page viewed before the current page.

- press after using the back key to return to the original page viewed.

access the browser menu

Press and hold M to access the browser menu.

Scroll to select the desired option.

main attractions

Page 36

Press - under Ok to initiate the option.

option

Exit Browser

you to the idle screen. Use this option when you want to return to the page currently viewed at a later time, without navigating through the entire menu structure again.

Reload

page viewed, refreshing the information with the most current from the information provider.

Home

page, the first page you see when launching the microbrowser.

Bookmarks

you have created using the Bookmark option.

- closes the browser and returns

- reloads the current Wireless Web

- returns you to your default Home

- allows you to access bookmarks

main attractions

option

Mark Site

- identifies sites you would like to visit easily and quickly from your microbrowser.

About Phone.com

the version of the Phone.com browser loaded on your handset.

Advanced Options

service issues you may have with your browser.

- contains information about

- helps troubleshoot any

end the microbrowser session

At any point in the session, press and hold E for two seconds to exit the microbrowser.

bluetooth

Your phone supports the use of wireless Bluetooth headsets.

Find it: M >

Bluetooth.

Page 37

The Bluetooth connection menu contains an option to search for audio devices.

turn Bluetooth On or Off

You can turn your phone’s Bluetooth feature on or off. While Bluetooth power is on, your phone can communicate with other devices.

Find it: M >

Select to your handset.

Select amount of time in which your handset can be found by other Bluetooth devices.

Tip:

You can turn off Bluetooth if you want to prolong battery life or if you enter an area where Bluetooth is prohibited.

Bluetooth > Setup > Power > On

Name

if you wish to assign a name

Find Me Time

to determine the

make a Bluetooth connection

connect your phone with a Bluetooth headset

Find it: M >

Follow the instructions on your Bluetooth headset to set it up to be found.

Once your Bluetooth headset is set to be found press phone will scan the Bluetooth headset until it finds it. Press name of the Bluetooth headset on your screen.

Your phone requires that you create a bond in order to connect with a Bluetooth headset. Press are prompted to bond with the headset.

Enter the Bluetooth pass key. Some Bluetooth devices ship with

Bluetooth PINs. Please refer to your

Bluetooth > Hands Free > [Find Devices].

on your handset. Your

when you see the

under

Yes

when you

main attractions

Page 38

Bluetooth device’s user guide to locate this information.

If a device ships without a Bluetooth PIN, then refer to its user guide to set the PIN on that device. To establish a connection to that device, enter the same PIN for both your phone and the device. For example, if you enter 1234 as the device’s PIN, then enter 1234 as your phone’s PIN.

Press - under Ok.

Note:

This handset offers a bluetooth auto

pair feature with auto pair compatible Motorola devices. When bonded via bluetooth with a certain device, the pin will not be required.

connect your phone with another device

Find it: M >

Bluetooth > Link To Devices.

main attractions

Select the device you want from the list of found devices on your screen.

Create a bond if you are prompted to do so.

Tip:

If you have previously connected to a device, the device will be stored on your phone so you can connect with it easily.

use Bluetooth during a call

You can connect with available Bluetooth devices during a call.

Note:

If the

Handsfree Devices

one device, then your phone will automatically try to connect to that device.

While in a call, press M >

Press - under Bluetooth.

Select the audio device you want to connect to from the list of

list contains only

Use Bluetooth.

Yes

to power On

Handsfree Devices

Page 39

send information via Bluetooth

You can use your phone to send Contacts entries, Datebook events, or pictures to another Bluetooth device.

The receiving device must be within 32 feet (10 meters) of your phone in order to connect with yours.

Note:

Files sent or received may be up to

200 kb.

send Contacts

Shortcut:

under

From the home screen press -

Contcs.

Select the contact you want to send. Press M > Press - under

Bluetooth. Select the device you want to transfer the

contact information to.

Send Via... > Bluetooth

Yes

to power On

or Search for the device by selecting

Devices]

If prompted, bond with the device. Your phone connects with the device and

transfers the contact.

send a Datebook event

Find it: M >

Select the datebook event you want to send.

Press M > If the event you select repeats, then you

will be prompted to choose whether to send the selected instance of the event or all instances of the event.

To send only the selected instance of the event, select

Datebook

Send Via... > Bluetooth

This Event Only

[Find

main attractions

Page 40

To send all instances of the event, select

Repeat Events

Press - under

Yes

to power On

Bluetooth.

Select the device you want to transfer the contact information to.

or Search for the device by selecting

Devices]

If prompted, bond with the device.

[Find

Your phone connects with the device and sends the datebook event.

send pictures via Bluetooth

Note:

Note: You can only send audio files, and pictures if they are not forward locked and if their DRM settings do not prevent you from sending.

Find it: M >

My Pictures.

main attractions

Select the picture you want to send.

Press M >

Select the device you want to transfer the

Send Via... > Bluetooth

contact information to. or Search for the device by selecting

Devices]

If prompted, bond with the device. Your phone connects with the device and

sends the datebook event.

[Find

Page 41

basics

See page 1 for a basic phone diagram.

display

The home screen shows when you turn on the phone. To dial a number from the home screen, press number keys and

Note:

Your home screen may look different.

Soft key labels show the current soft key

functions. For soft key

locations, see

page 1.

status indicators

Status indicators are shown at the top of the home screen:

1 Signal Strength Indicator:

Vertical bars

show the strength of the network

basics

Page 42

connection. You can’t make or receive calls when

2 Active Phone Line:

1 is ready to make calls.

3 Speaker Off:

Private calls and group calls are set to come through the earpiece rather than through the speaker.

4 Ringer Off:

5 Message Indicator:

you receive a text message.

6 Packet Data:

transfer packet data or is transferring packet data.

7 Battery Charge Indicator:

indicates a greater charge. Recharge the battery when your phone shows Low Battery.

or 0

shows.

1 indicates phone line

Sounds associated with

Your phone is set to not ring.

Shows when

Your handset is ready to

basics

A fuller battery

text entry

Some features let you enter text. Your phone provides convenient ways to

enter words, letters, punctuation, and numbers whenever you are prompted to enter text (for example, when adding a Contacts entry or when text messaging).

change the character input mode:

When you see a screen where you can enter text, press character input mode.

to change the

Page 43

Select one of the following options:

entry modes

Alpha

Word

Symbols

Numeric

Tip:

change letter capitalization (

Press a key several times for each character.

Enter words using a predictive text entering system that lets you enter a word with fewer keypresses.

Enter symbols. Enter numbers by pressing the

numbers on the keypad.

When entering text, press and hold # to

Abc

ABC

abc

word mode

Word English Text Input lets you enter text into your phone by pressing keys just once per letter.

Word English Text Input analyzes the letters you enter using an intuitive word database and creates a suitable word. (The word may change as you type.)

enter a word using Word Character Input:

Select the

Press the corresponding keys once per letter to enter a word (for example, to enter the word (If you make a mistake, press

Delete

Press and hold delete an entire entry.)

To accept a word and insert a space, press

Word

character input mode.

Jeff

, press

5333

under

or * to erase a single character.

under

Delete

or * to

basics

Page 44

alpha mode

enter characters by tapping the keypad:

Select the

Press the corresponding keys repeatedly until the desired letter appears. (For example, to enter the word once,

mistake, press single character. Press and hold

Delete

By default, the first letter of an entry is capitalized and the following letters are lowercased. After a character is entered, the cursor automatically advances to the next space after two seconds or when you enter a character on a different key.

Alpha

mode.

Jeff

, press 5

two times, 3 three times, and

three times again. If you make a

under

Delete

to erase a

to erase an entire entry.)

basics

under

Characters scroll in the following order:

characters

1 2 3 4 5 6 7 8 9 0 # *

. ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ % £ ¥ A B C 2 Á Ã Â À Ç D E F 3 É Ê È G H I 4 Í Ì J K L 5 M N O 6 Ó Õ Ô Ò P Q R S 7 ß T U V 8 Ú Ü Û Ù W X Y Z 9 + - 0 * / \ [ ] = > < # § Space Back

Page 45

volume

handsfree speaker

Press the volume keys up or down to:

•

turn off an incoming call alert

•

change the earpiece volume during calls

•

change the ringer volume from the home screen.

navigation key

Press the navigation key

up, down, left, or right to scroll to items in the display. When you scroll to something, press

You can use your phone’s hands-free speaker to make calls without holding the phone to your ear.

During a call press the speaker key turn the hands-free speaker on.

The hands-free speaker stays on until you press the speaker key or end the call. The next phone call will redirect the audio back to the earpiece.

transmitters

Note:

Consult airline staff about the use of the Transmitters feature during flight. Turn off your phone whenever instructed to do so by airline staff.

basics

Page 46

Transmitters turns off your phone’s calling features in situations where wireless phone use is prohibited, but you can use the phone’s other non-calling features when Transmitters turned Off.

Find it: M > u >

Advanced > Transmitters > Off

use GPS with map software

Your phone is enabled with a highly-capable GPS receiver that sends location information to a USB port on a PC, laptop, or PDA.

Note:

No serial port connectivity is provided by your phone. Applications on the host device which are expecting to receive the GPS location information via a serial port must instead use a Virtual Serial Comm Port.

The data sent to the host device is formatted as prescribed in the National Marine

basics

Electronics Association 0183 V3.0 (NMEA-

0183) standard. As such it supports the following sentences: GGA, GLL, GSA, GSV, RMC, and VTG.

This handset is not a full NMEA-0183 compliant device supporting electrical RS422/RS-232 connectivity as dictated by the NMEA-0183 standard. Consequently it's unsuitable for conventional marine NMEA0183 equipment use. Its intended use is for normal "terrestrial" mobile users who want to enable their USB hosting computing devices such as a PC, laptop or PDA with the phone's highly-capable GPS functionality.

get connected

Slide open the phone's bottom connector and insert a mini-

Page 47

USB cable into the phone's bottom connector.

Insert the other end of the mini-USB cable into a vacant USB receptacle of your host device. A virtual USB Comm Port will be created on your host device upon successful enumeration of the phone as a USB Communications Device Class device.

Ensure no application in your host device is using the created COMM port. You may need to ensure that the created virtual COMM port settings are set as follows:

• Bits per second

• Data bits

•Parity

: None

• Stop bits

• Flow control

: 4800

: 8

: 1

: None.

Start the GPS application on your host device. Set the GPS application to start accepting NMEA-0183 formatted data from the created Virtual COMM port.

Set your phone to start sending NMEA0183 formatted location information.

Find it: M >

GPS > Interface > NMEA OUT > USB.

Your phone is now actively sending location NMEA-0183 formatted GPS data to your USB host device.

To stop your phone from sending location data:

Find it: M >

Note:

GPS > Interface > NMEA OUT > Off.

Each time you power your phone Off, NMEA OUT is automatically set to Off and you need to manually restart it using the menu selections above.

Your USB host device will generally provide charging power (5V, up to 500mA) to your

basics

Page 48

phone via the mini-USB cable therefore no other charging power to it will normally be required. However some laptops may require that you provide external AC/DC power to the laptop in order for it to provide full 500mA charging current capability to the phone.

basics

Page 49

calls

To make and answer calls, see page 15.

recent calls

The

Recent Calls

associated with calls you have made and received and call alerts you have received.

When you send or receive Private calls, the

Recent Call

with those calls:

•

The recent calls list displays up to 20 of the most recent calls and call alerts.

list contains information

list contains the following PTT items

Pictures Events My Info Contacts

Find it: M >

Tip:

You can also access the Recent Calls list

by pressing the navigation key

Scroll through the list.

Highlight the item you want to view or perform some action on.

To view more details of the item press O.

Recent Calls.

down.

store an item to contacts from recent calls

Phone calls, Private calls, My Info received from other phones, or Contacts entries received from other phones can be stored to the Contacts list from the Recent Calls list.

Find it: M >

Recent Calls

calls

Page 50

Scroll to or select the item you want to store.

Press a under information as a new entry in the Contacts list.

Save

is not one or you options, press M

Update Contacts

want to update.

Press a under

Save

to store the

. And select the contact you

Done

to save your changes.

redial

To redial your last outgoing phone call, press and hold private call.

or push the PTT button if it was a

calls

voice name

You can place calls by speaking comands to your phone if you have previously assigned a voice name to your contacts.

assign voice names to contacs:

Press a under

Contact].

Assing a name, phone number and select

[Options]

Select

Voice Name

record the voice name.

Press a under save the entry.

place a call using voice command:

From the home screen press and hold the speaker key say the voice name.

Contcs

and select

and follow the propmt to

Back

and a under

until you are prompted to

[New

Done

Page 51

The handset will automatically place the call.

caller ID

Caller ID allows people to identify a caller before answering the phone by displaying the number of the incoming call. If you do not want your number displayed when you make a call, just follow these easy steps.

To block your phone number from being displayed for a specific outgoing call:

Press

*67

Enter the number you want to call.

Press

To permanently block your number, call TELUS Client Care.

call forward

Call forwarding sends calls to the phone numbers you specify. You can forward all calls to one number or forward missed calls to different numbers depending on the reason you missed the call. You can forward phone lines 1 and 2 independently.

Find it: M >

To forward all calls select select want all your calls forwarded to.

You can specify a forwarding number for each type of missed call by selecting

Detailed

option

If Busy

transferring data.

Call Forward

to enter the phone number you

and chosing the following options:

: When your handset is on a call or

All Calls

and

calls

Page 52

option

If No Answer

first 4 rings.

If Unreachable

coverage or powered off.

: When you do not answer on the

: When your handset is out of

emergency calls

TELUS programs one or more emergency phone numbers that you can call under any circumstances, even when your phone is locked or the SIM card is not inserted.

Note:

Emergency numbers vary by country. Your phone’s preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues.

Your phone supports emergency calling. Emergency phone calls can be made even

calls

when your SIM card is blocked or not in your phone.

Dial 911 or your local emergency number to be connected to an emergency response center. If you are on an active call, you must end it before making an emergency call.

When you make an emergency call, your phone’s GPS Enabled feature can help emergency service personnel find you, if you are in a location where your phone's GPS antenna has established a clear view of the open sky and your local emergency response center has the equipment to process location information. Because of the limitations of this feature, always provide your best knowledge of your location to the emergency response center when you make an emergency call.

Note:

Emergency calls cannot be placed

while the keypad is locked.

Page 53

Note:

If you have not registered on the network, emergency calls cannot be placed while your SIM card is in your phone.

international calls

If your phone service includes international dialing, press and hold 0 to insert your local international access code (indicated by +). Then, press the keypad keys to dial the country code and phone number.

You can aditionally enable a predefined prefix to the dialing number by using

Find it: M >

Select

Select your choice.

When the predefined prefix is inserted to the front of the number that you are dialing.

Settings

Phone Calls

Prepend

and set it to On.

Number

and add the prefix number of

Prepend

feature is set to On, the

Prepend

dialing.

Except that the number is led by "*", "00", "011" or the number contains "+".

Note:

You can also use when the feature is set to enter the phone number from the home screen and press temporary prepend will be inserted to the number you are dialing.

Prepend

Add Prepend

Off

temporarily

. For example,

. The

speed dial

Each phone number stored in Contacts is assigned a Speed Dial number, which you can use to call that number.

From the home screen, use the keypad to enter the Speed Dial number assigned to the phone number you want to call.

Press #.

Press S.

calls

Page 54

turbo dial

The first nine entries in your contacts are set for turbo dial. They can be called by pressing and holding the speed dial number (1 through 9).

voice mail

Note:

To receive voice mail messages, you must first set up a voice mail account with TELUS.

receive a message

When you receive a voice mail message,

VoiceMail Message

•

appears on the display.

To call TELUS voice mail system and listen to the messages, press under

Call

To dismiss the message notification press

, or a under

calls

Back

New

If the caller leaves a message, this icon appears on the display, reminding you that you have a new message.

advanced voice mail with fax

Mike's Advanced Voice Mail with Fax allows you to receive faxes directly to your handset and store them along with your voice messages until you are ready to print. Follow the voice mail prompts to print the fax to a fax machine. It ensures privacy, convenience and eliminates the need for a separate fax line.

When you subscribe to Mike's Advanced Voice Mail with Fax, you will receive a fax number from your point of feature activation. If you have not received a fax number, please contact the nearest TELUS dealer or call TELUS client care.

Please see more details of TELUS Voice Messaging services.

www.telusmobility.com

for

Page 55

fax mail Indicator

Your handset is equipped with a Fax Mail indicator to notify you when you have received a fax through Mike's Advanced Voice Mail with Fax.

Shortcut:

under When you receive a new fax, New FaxMail

Message appears on the display. Your handset will alert you audibly until you

press

From the home screen press a

Mesg

Fax Mail

under

Call

or a under

Exit

net alerts

When you receive a appears on the display.

If you dismiss the notification, this icon appears on the display, reminding you that you have a new message.

Net Alert

, a notification

Mike’s Talk Around

Mike’s Talk Around allows direct two-way handset-to-handset communications between two or more handsets equipped for Mike’s Talk Around. You can make and receive Mike’s Talk Around calls even when network service is not available. You can talk to anyone on your code and channel within your range.

Note:

Range will vary based on terrain, man-

made structures and atmospheric conditions. Mike’s Talk Around allows you to use code or

private mode operation, use up to 10 channels and communicate with standalone Mike’s Talk Around radios.

Note:

Mike’s Talk Around is not compatible

with older Family Radio Services products. The following features and main menu items

will not be available while in Talk Around mode:

calls

Page 56

•

On-network phone calls

•

On-network Private calls

•

Data transmission

•

Incoming message notification

•

Musical ring tones

•

Call forwarding

•

Messages

•

Call Timers

•

Call alerts

•

Voice records

are set to appears on the second line of the display and softkeys.

Note:

Talk Around

set appear on the While in

display, indicating that there is no network signal and

Phones used in Talk Around mode should be a minimum of 6 feet apart to maximize performance and improve transmission range.

TA Ready

appears just above the

When switching from the network to

, the last channel and code that were

Talk Around

, this icon m appears on the

idle screen.

is active.

set your phone to Mike’s Talk Around

Find it: M >

After a few seconds, the appears. The channel you are set to appears on the first line of the display, the code you

Talk Around > Go To TA

calls

Talk Around

idle screen

exit Talk Around

Find it: M >

The following message displays:

Network Please Wait

network idle screen appears.

TA Options > Exit TA

. After a few seconds, the

Switching to

Page 57

channels and codes

Your phone has 10 channels and 15 codes.

Channels

that allow you to make and receive Talk Around calls. Other parties may also be talking on the same channel.

Codes

unwanted messages and other disturbances when you are on the same channel as others.

To have a conversation, all parties must be on the same channel and code. For private Talk Around calls, the person you are calling must be in Talk Around and set to the same channel to receive your call.

Note:

that are on your code and channel can hear your conversation.

are divided into sets of frequencies

help minimize interference from

When making a code call, all parties

set a channel

From the Talk Around idle screen, press

a under

Scroll to

Select a channel number from 1 to 10.

When you are finished, press a

Back

screen.

set a code

From the Talk Around idle screen, press

Scroll to

Edit

Channel

and press a under

to return to the Talk Around idle

under

Edit

Code

and press a

under

Edit

under

Edit

calls

Page 58

Select a code number from 1 to 15 or one of the following options:

option

Receive All:

Sets your phone to receive Talk Around transmissions from any phone that is set to the same channel, regardless of the code (1-15). When you receive transmissions with the code set to changes from

Receive All

, the display

to the code on

which the transmission was received.

Tip:

You can reply to an incoming call within 6 seconds after hearing the short ending beep by pressing the PTT button.

Note:

You cannot initiate a code call when the code is set to PTT button with the code set to

Receive All

. If you push the

Receive All

you will receive an error message.

calls

option

Pvt Only

Allows you to have a private conversation with another person using Talk Around. When on a private Talk Around call, no other parties can hear your conversation. In order to make a private Talk Around Call, you must use the valid 10-digit Personal Telephone Number (PTN) of the person you are calling. The person you are calling must be in Talk Around and set to the same channel to receive your call.

Note:

An error message will occur if you don’t use a valid PTN, or the person that you are trying to reach is not in Talk Around, or is set to a different channel or out of range.

When you are finished, press a

Back

to return to the Talk Around idle

under

screen.

Page 59

make and receive code calls in Talk Around

To make a code call in Talk Around:

Push and hold the PTT button. appears on the first line of display. Begin speaking after your phone emits the Talk Around tone.

Release the PTT button to listen.

Note:

The tone emitted from your phone when using Talk Around is 4 beeps and sounds different from the standard tone heard with on-network Private and group calls.

You could receive an error message if there are no parties on your channel or code, or if you are out of range.

When you receive a code call using Talk Around, display.

Receive

appears on the first line of the

TA Transmit

Note:

An incoming Talk Around call can be

terminated at any time by pressing

make a private Talk Around call

Enter the 10-digit PTN of the person you want to call on your channel, or press under

Contacts

and select a contact, or scroll

to a number in the recent calls list.

Push and hold the PTT button. Begin speaking after your phone emits the Talk Around tone.

Release the PTT button to listen.

The number or name of the person you are calling will appear in the first line of the display.

calls

Page 60

receive a private Talk Around call

The number or name of the person who initiated the call will appear in the first line of the display.

You can reply within 6 seconds simply by pushing the PTT button.

end a private Talk Around call

A private Talk Around call will end if there is no communication for 6 seconds.

Note:

A private Talk Around call may be interrupted during the 6 second idle time by another code call or private call.

make emergency calls while in Talk Around mode

If you attempt to make an Emergency 911 call while in Talk Around mode, your phone will

calls

automatically exit Talk Around mode and attempt to find a network signal.

Note:

If you are out of network coverage your phone will not be able to make an emergency 911 cellular call until you go back into the network coverage area.

You must wait until the phone reconnects to the network before attempting to make an emergency 911 cellular call.

setup options

Talk Around setup options are available in the TA Options screen in both network and Talk Around modes.

access setup options in network

Find it: M >

access setup options in Talk Around

Find it: M >

Talk Around

TA Options > Setup

Setup

Page 61

The following options become available:

option

Direct Launch

Launchs your phone directly into Talk Around when you select Talk Around from the Main Menu. If you will not see

Talk Around

from the main menu. In order to

have access to your setup options,

Launch

must be set to

Direct Launch

TA Options

when you select

Off

. Or you can access

is set to On,

Direct

setup options while in Talk Around by pressing m and selecting

TA Options

State Tone

Notifies you periodically with a tone that you are in

Talk Around

mode. You can select a time frame during which you want to be notified that you are in Select from

30 minutes, 1, 2, 3

Talk Around

or 4

mode.

hours

calls

Page 62

customize

ring tones

To set the ring tone your phone makes when you receive phone calls, call alerts, message notifications, pictures sent using Send via PTT or Datebook reminders:

Note:

Only ring tones stored in your phone’smemory are available in the ring tones list. To assign a ring tone stored on a memory card inserted in your phone’s memory card slot, you must go to the media center. Ring tones purchased or received from TELUS can be assigned as ring tones. Other audio files may not be supported as ring tones..

Find it: M > Ring Tones

Make sure

Vibrate All

customize

is set to

Off

Scroll through the list of ring tones and select the one you want to assign. sets your phone to vibrate instead of making a sound; neither vibrate nor make a sound.

Tip:

Highlighting a ring tone lets you hear

it.

Select the features you want to assign the ring tone to.

When you are finished, press

Note:

This icon M appears on the display if you set your phone to appears on the display if you set the phone to

Vibrate All

Silent

sets your phone to

Silent

. This icon

Done

Vibrate

Page 63

set your phone to vibrate

You can set your phone to vibrate instead of making a sound when you receive all phone calls, Private calls, group calls, call alerts, messages notifications, pictures sent using Send via PTT, and Datebook reminders.

Find it:

To set your phone to vibrate instead of making a sound for some features but not others:

Find it:

Ring Tones > Vibrate All

Ring Tones

Make sure Select Select the features you want to set to

make no sound. When you are finished, press a under

Done

Vibrate All

is set to

Vibrate

from the list of ring tones.

> On.

Off

wallpaper

Set a photo or picture as a wallpaper (background) image in your phone’s home screen or throughout all menu screens.

Find it: M >

Wallpaper.

To select a wallpaper image scroll through the list of pictures and press picture of your choice.

Note:

automatically after a certain period of time by turning on the Wallpaper menu.

Settings

Display/Info > Wallpaper

to select the

You can set the wallpaper to change

Auto Cycle

feature located in the

backlight

Set the amount of time that the display and java apps. backlights remain on, or turn off the backlight feature to extend battery life.

customize

Page 64

Find it: M >

Settings

Display/Info > Backlight

datebook

Find it:

M > Datebook > M

You can view or change these options:

option

Start View:

week view, or month view when you access Datebook.

Daily Begin:

This is the earliest time of day displayed in week view, if you have a 12-hour day view.

Delete After:

Datebook waits to delete an event after it occurs.

Time Shift:

Datebook events. This is useful if you are traveling to a different time zone.

Sets Datebook to start in day view,

Sets the beginning of your day.

Sets the amount of time

Lets you shift the times of all

customize

> Setup

option

Alert Timeout:

continues to sound when you receive a Datebook reminder.

Clock:

appear on the home screen; sets time and date format.

Sets the amount of time a tone

Controls whether the time and date

hide or show location information

Your phone is equipped with a Location feature for use in connection with locationbased services that may be available in the future.

The Location feature allows the network to detect your position. Turning Location off will hide your location from everyone except for your local emergency response center.

Page 65

Note:

Turning Location on will allow the network to detect your position using GPS technology, making some applications and services easier to use. Turning Location off will disable the GPS location function for all purposes except 911, but will not hide your general location based on the cell site serving your call. No application or service may use your location without your request or permission. GPS-enhanced 911 is not available in all areas.

set your privacy options

Find it:

Select

GPS

Privacy

Restricted, Unrestricted

, or

Ask Access

customize

Page 66

other features

advanced calling

feature

call waiting

other features - advanced calling

Find it:

second call and put the active call on hold press

To accept the second call and end the active call press

Your phone rings with the second call for you to answer.

To accept the

under

Yes

feature 3-way call

Make or receive a phone call and press

3 Way.

Enter the second phone number, press

and a under

Tip:

For quick ways to enter the number, press see the dialing menu.

You cannot make any other calls after you have joined a 3-way call, even if one party disconnects.

Join.

Page 67

contacts datebook

feature

edit/delete contact entry

set ringer ID

Press a under Select a contact and press

Edit.

desired content and press

under

Press a under Select a contact and press

Edit

desired ringer, press under

Back

Done

Contacts

Change the

Done

Contacts

Ringer.

Select

, and a under

feature

create datebook events

see datebook event

event reminder

other features - contacts

To create a new Datebook event press [

New Event]

To see a calendar event press or right to see the day and

up or down to see the

events. When an event reminder

occurs press Press a under

the reminder.

> D >

> D > left

under

Back

View.

to close

Page 68

feature receive

datebook events via PTT

other features - GPS

To view the information while still in the Private call press

The 5 most recent events received from a Private ID are stored with the that Private ID on the recent calls list.

To store events to the Datebook press

Save

while viewing the event

you want to store.

under

GPS

To improve GPS performance:

•

Stay in the open,

•

Move away from other electrical or electronic devices

•

Remain stationary.

•

Avoid covering the antenna with your hands.

feature

view approximate location

To see where you currently are press

Scroll to view the entire screen.

To recalculate position press

Rfrsh

minutes.

GPS

. This may take several

Position.

Page 69

feature

set GPS privacy options

change GPS PIN

To set the level of privacy for your GPS system press

GPS

Privacy.

If your GPS PIN security feature is enabled, enter your GPS PIN and select the privacy option you want.

Note:

Your default GPS PIN is

0000. To change your GPS PIN

press

Settings

Change Passwds

Enter the current GPS PIN and enter the new 4- to 8-digit GPS PIN. Re-enter the new 4to 8-digit GPS PIN to confirm.

GPS PIN

Security

handsfree

Note:

The use of wireless phones while driving may cause distraction. Discontinue a call if you can't concentrate on driving. Additionally, the use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products

feature

speakerphone

auto answer

To activate the speakerphone while driving press and hold the speakerphone key

To automatically answer calls when connected to a car kit or headset press >

Settings

Phone Calls

Ans.

Select the amount of

rings before answering.

Auto

other features - handsfree

Page 70

personalize pc applications

feature

language

backlight time length

menu style

clock display

other features - personalize

To set the language of your menu press

Display/Info

To select how long the display screen and keypad are backlit press

Settings

To show the Main Menu as graphic icons or a text-based list press

Display/Info

To display the clock on your home screen press

Settings Display

Language.

Display/Info

Menu View.

Display/Info > Clock

On.

Settings

Backlight.

feature other PC

applications

TTY

feature turn On TTY

feature

choose TTY mode

For a list of complete PC applications visit www.motorola.com/iden

From the home screen press

Settings

Phone

Calls

TTY

Use TTY

On.

From the home screen press

Settings

Phone

Calls

TTY

Type.

Select from

TTY, VCO

HCO.

Page 71

feature change the

TTY baud rate

change TTY mode during a call

security

feature phone lock

From the home screen press

Settings

Phone

Calls

TTY

Baud.

Select

45.45

50.00

While in the TTY call, press

In Call Setup

Select from

To lock the phone press M >

Settings > Security

Lock Now

TTY

TTY, VCO

Auto Lock.

Type.

HCO

Phone Lock

feature keypad lock

enable SIM PIN

change SIM PIN

Note:

You can make emergency calls on a locked phone (see page 50). A locked phone still rings or vibrates for incoming calls or messages, but you need to unlock it to answer.

To lock the keypad press M >

Settings > Security

Lock Now

Auto Lock

Shortcut:

keypad press To enable SIM PIN, press

To change the SIM PIN, press

Change Passwds

To lock the

Settings > Security

SIM PIN

Keypad Lock

SIM PIN

other features - security

Page 72

other features - security

Page 73

Important Safety and

Legal Information

Page 74

Safety and General Information

Safety Information

This section contains important information on the safe and efficient operation of your phone. Read this information before using your integrated multi-service portable radio.*

Exposure to Radio Frequency (RF) Energy

Your phone contains a transmitter and receiver. When it is ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits.

Your Motorola phone is designed to comply with local regulatory requirements in your country concerning exposure of human beings to RF energy.

Portable Radio Product Operation and EME Exposure

Your Motorola radio product is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy (EME):

Safety Information

•

United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-part J.

•

American National Standards Institute (ANSI) / Institute of Electrical and Electronics Engineers (IEEE). C95. 1-1992.

•

Institute of Electrical and Electronics Engineers (IEEE). C95. 1-2005 Edition.*

•

International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998.

•

Ministry of Health (Canada). Safety Code 6. Limits of Human Exposure to Radio frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz,

1999.

•

Australian Communications Authority Radio communications (Electromagnetic Radiation - Human Exposure) Standard 2003.

•

ANATEL, Brazil Regulatory Authority, Resolution 303 (July 2, 2002) "Regulation of the limitation of exposure to

* The information provided in this document supersedes

the general safety information in user’s guides published prior to May 1, 2006

Page 75

electrical, magnetic, and electromagnetic fields in the radio frequency range between 9 kHz and 300 GHz." "Attachment to Resolution 303 from July 2, 2002."

Operational Precautions

To assure optimal radio product performance and to be sure that human exposure to RF does not exceed the guidelines set forth in the relevant standards, always follow these instructions and precautions:

Phone Operation

When placing or receiving a phone call, hold your radio product as you would a wireline telephone.

microphone

Two-way radio operation

Your radio product has been designed and tested to comply with national and international standards and guidelines regarding human exposure to RF electromagnetic energy, when operated in the two-way mode (at the face, or at the abdomen when using an audio accessory) at usage factors of up to 50% talk/50% listen.

Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the PTT button. To receive calls, release the PTT button. Transmitting 50% of the time or less, is important because this radio generates measurable RF energy only when transmitting (in terms of measuring for standards compliance).

Speak directly into the

When using your radio product as a traditional two-way radio,

vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips

If you wear a radio product on your body when transmitting, always place the radio product in a Motorola approved clip, holder, holster, case or body harness. If you do not use a body-worn accessory supplied or approved by Motorola and are not using the radio product in the intended use positions along side the head in the phone mode or in front of the face in the two-way radio mode, or if you hang your device from a lanyard around your neck, keep the device at least 2.5 centimeters (1 inch) from your body when transmitting.

hold the radio product in a

Approved Accessories

For a list of approved Motorola accessories call 1-800-453-0920, or visit our website at www.motorola.com/iden

RF Energy Interference/Compatibility

Nearly every electronic device is subject to RF energy interference from external sources if inadequately shielded, designed or otherwise configured for RF energy compatibility. In some circumstances your handset may cause interference with other devices.

Safety Information

Page 76

Follow Instructions to Avoid Interference Problems

Turn OFF your radio product where posted notices instruct you to do so.

In an aircraft, turn off your radio product whenever instructed to do so by airline staff. If your radio product offers an airplane mode or similar feature, consult airline staff about using it in flight.

Implantable Medical Devices

If you have an implantable medical devices, such as a pacemaker or defibrillator, consult your physician before using this radio product.

Persons with implantable medical devices should observe the following precautions:

•

ALWAYS keep the phone more than 20 centimeters (8 inches) from the implantable medical device when the phone is turned ON.

•

DO NOT carry the phone in a breast pocket;

•

Use the ear opposite the implantable medical device to minimize the potential for interference.

•

Turn OFF the phone immediately if you have any reason to suspect that the interference is taking place.

Read and follow the directions from the manufacturer of your implantable medical device. If you have any questions about using

Safety Information

your wireless phone with your implantable medical device, consult your health care provider.

Hearing Aids

Some phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer or physician to discuss alternatives.

Other Medical Devices and Health Care Facilities

If you use any other personal medical devices, consult your physician or the manufacturer or your device to determine if it is adequately shielded from RF energy. Turn off your radio product when instructed to do so in hospitals or health care facilities that may be using equipment that is sensitive to external RF energy.

Driving Precautions

Check the laws and regulations on the use of radio products in the area where you drive. Always obey them.

When using your radio product while driving, please:

•

Give full attention to driving and to the road. Using a phone may be distracting. Discontinue a call if you can’t concentrate on driving.

•

Use hands free operation, if available.

•

Pull off the road and park before making or answering a call if driving conditions so require.

Page 77

•

032374o032374o

Do not place a handset in the airbag deployment area.

Responsible driving practices can be found in the “Smart Practices While Driving” section at the end of this guide and/or at the Motorola Web site: www.motorola.com/callsmart

Note:

The use of wireless phones while driving may cause

distraction. Discontinue a call if you can’t concentrate on driving. Additionally, the use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.

Operational Warnings

Obey all posted signs when using phones in public areas.

Potentially Explosive Atmospheres

Areas with potentially explosive atmospheres are often but not always posted, and can include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air contains chemicals or particles, such as grain, dust or metal powders.

When you are in such area, turn off your handset, and do not remove, install, or charge batteries unless it is a radio product type especially qualified for use in such areas as “Intrinsically Safe” (for example, Factory Mutual, CSA, or UL approved). In such areas, sparks can occur and cause an explosion or fire.

Batteries and Chargers

Caution: Improper treatment or use of batteries may present a danger of fire, explosion, leakage, or other hazard. For more information, see the “Battery Use and Battery Safety” section in this user’s guide.

Your battery, charger, or portable radio may contain symbols, defined as follows:

Symbol Definition

Important safety information follows.

032376o032376o

032375o032375o

Li Ion BATT

032378o

Do not dispose of your battery or phone in a fire.

Your battery or phone may require recycling in accordance with local laws. Contact your local regulatory authorities for more information.

Do not throw your battery or phone in the trash.

Your phone contains an internal lithium ion battery.

Safety Information

Page 78

Symbol Definition

Do not let your battery, charger, or phone get wet.

Listening at full volume to music or voice through a headset may damage your hearing.

Choking Hazards

Your portable radio or its accessories may include detachable parts, which may present a choking hazard to small children. Keep your device and its accessories away from small children.

Glass Parts

Some parts of your phone may be made of glass. This glass could break if the product is dropped on a hard surface or receives a substantial impact. If glass breaks, do not touch or attempt to remove. Stop using your phone until the glass is replaced by a qualified service center.

Seizures/Blackouts

Some people may be susceptible to epileptic seizures or blackouts when exposed to flashing lights, such as when playing video games. These may occur even if a person has never had a previous seizure or blackout.

Safety Information

If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult with your physician before playing video games or enabling a flashing-lights feature (if available) on your phone.

Discontinue use and consult a physician if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, involuntary movements, or disorientation. It is always a good idea to hold the screen away from your eyes, leave the lights on in the room, take a 15-minute break every hour, and stop use if you are very tired.

Caution About High Volume Usage

Listening at full volume to music or voice through a headset may damage your hearing.

Repetitive Motion

When you repetitively perform actions such as pressing keys or entering finger-written characters, you may experience occasional discomfort in your hands, arms, shoulders, neck, or other parts of your body. If you continue to have discomfort during or after such use, stop use and see a physician.

Page 79

Service & Repairs

If you have questions or need assistance, we’re here to help. Go to www.motorola.com/iden

number of customer care options. You can also contact the

, where you can select from a

Export Law Assurances

Export Law

This product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade.

Motorola Customer Support Center at 1-800-453-0920 (United States), 1-877-483-2840 (TTY/TDD United States for hearing impaired).

Export Law

Page 80

Specific Absorption Rate Data

ALL MODELS WITH FCC ID IHDT56HG2 MEET THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.

The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. conducted using standard operating positions reviewed by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In

Export Law

Tests for SAR are

general, the closer you are to a wireless base station antenna, the lower the power output.

Before a phone model is available for sale to the public, it must be tested and certified to the FCC that is does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 1.53 W/kg and when tested on the body, as described in this user guide, is 1.55 W/kg during packet data transmission. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements.)

While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. Please note that improvements to this product model could cause differences in the SAR value for later products; in all cases, products are designed to be within the guidelines.

Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.ctia.org Telecommunications Association (CWTA) Web site: http://www.cwta.ca

or the Canadian Wireless

Page 81

1. In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.

2. The SAR information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product.

Export Law

Page 82

Motorola Limited Warranty for the United States and Canada

Warranty

What Does this Warranty Cover?

Note: FOR IDEN SUBSCRIBER PRODUCTS, ACCESSORIES AND SOFTWARE PURCHASED IN THE UNITED STATES OR CANADA

What Does this Warranty Cover?

Subject to the exclusions contained below, Motorola, Inc. warrants its Motorola iDEN Digital Mobile and Portable Handsets ("Products"), Motorola-branded or certified accessories sold for use with these Products ("Accessories") and Motorola software contained on CD-Roms or other tangible media and sold for use with these Products ("Software") to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below.

consumer's exclusive remedy, and applies as follows to new Products, Accessories and Software purchased by

Warranty

This limited warranty is a

consumers in the United States or Canada, which are accompanied by this written warranty:

Products Covered Length of Coverage Products as defined

above.

Accessories as defined above.

Products or Accessories that are Repaired or Replaced.

One (1) year

purchase by the first consumer purchaser of the product.

One (1) year

purchase by the first consumer purchaser of the product.

The balance of the original warranty or for ninety (90) days

from the date returned to the consumer, whichever is longer.

from the date of

Page 83

Products Covered Length of Coverage Software

as defined above. Applies only to physical defects in the media that embodies the copy of the software (e.g. CD-ROM, or floppy disk).

What is not covered? (Exclusions)

Normal Wear and Tear

replacement of parts due to normal wear and tear are excluded from coverage.

Ornamental Decorations

emblems, graphics, rhinestones, jewels, gemstones and their settings, and other decorative elements, are excluded from coverage.

Batteries

. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty.

Abuse & Misuse

improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for

Ninety (90) days from the date of purchase.

. Periodic maintenance, repair and

. Ornamental decorations such as

. Defects or damage that result from: (a)

commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola, are excluded from coverage.

Use of Non-Motorola Products and Accessories

damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage.

Unauthorized Service or Modification

resulting from service, testing, adjustment, installation, maintenance, alteration, including without limitation, software changes, or modification in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage.

Altered Products

numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola housings, antennas, or parts, are excluded from coverage.

Communication Services

Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products, Accessories or Software is excluded from coverage.

Software Embodied in Physical Media.

that the software will meet your requirements or will work in combination with any hardware or software applications provided by third parties, that the operation of the software products will be

. Products or Accessories with (a) serial

. Defects, damages, or the failure of

. Defects or damages

. Defects or

No warranty is made

Warranty

Page 84

uninterrupted or error free, or that all defects in the software products will be corrected.

Software NOT Embodied in Physical Media

not embodied in physical media (e.g. software that is downloaded from the internet), is provided "as is" and without warranty.

Who is covered?

consumer purchaser, and is not transferable.

What will Motorola Do?

charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products, Accessories or parts. No data, software or applications added to your Product, Accessory or Software, including but not limited to personal contacts, games and ringer tones, will be reinstalled. To avoid losing such data, software and applications please create a back up prior to requesting service.

How to Obtain Warranty Service or Other Information?

obtain service or information, please call: Motorola iDEN Customer Services 1-800-453-0920 or

954-723-4910 TTY-877-483-2840 Or visit us online at http://www.motorola.com/iden You will receive instructions on how to ship the Products,

Accessories or Software, at your expense, to a Motorola Authorized Repair Center. To obtain service, you must include: (a) a

This warranty extends only to the first

Motorola, at its option, will at no

Warranty

. Software that is

copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number.

What Other Limitations Are There?

WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.

Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or

ANY IMPLIED

Page 85

exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another.

Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the Motorola software. Motorola software may only be copied into, used in, and redistributed with, the Products associated with such Motorola software. No other use, including without limitation disassembly of such Motorola software or exercise of the exclusive rights reserved for Motorola, is permitted.

Patent and Software Provisions

MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and Motorola will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:

a.That MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;

b.That MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; and

c.Should the Product or parts become, or in MOTOROLA'S opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA.

MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product or any parts thereof.

Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software, such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise or rights in such MOTOROLA software is permitted. No license is

Warranty

Page 86

granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights.

Warranty

Page 87

Hearing Aid Compatibility

HAC

A number of Motorola phones have been tested for hearing aid compatibility. When some wireless phones are used with certain hearing aids, users may detect a noise which can interfere with the effectiveness of the hearing aid.

Some hearing aids are more “immune” than others to this interference noise, and phones can also vary in the amount of interference noise they may generate. ANSI standard C63.19 was developed to provide a standardized means of measuring both mobile phone and hearing aids to determine usability rating categories for both.

Ratings have been developed for mobile phones to assist hearing aid users find phones that may be compatible with their hearing aid. Not all phones have been rated for compatibility with hearing aids. Phones that have been rated have a label with the rating(s) located on the box, and at www.motorola.com/accessibility

These ratings are not guarantees of compatibility. Results will vary depending on the user's hearing aid and individual type and degree of hearing loss. If a hearing aid is particularly vulnerable to interference, even a phone with a higher rating may still cause unacceptable noise levels in the hearing aid Trying out the phone with your hearing aid is the best way to evaluate it for your personal needs.

“M” Rating

hearing aid compatibility and are likely to generate less interference to hearing aids than unrated phones. (M4 is the “better” or higher of the two ratings.) On those models with an extendable antenna, this rating is determined only with the antenna extended.

“T” Rating

likely to be more usable with a hearing aid's telecoil (“T Switch” or “Telephone Switch”) than unrated phones. (T4 is the “better” or higher of the two ratings.) On those models with a telecoil mode setting, this rating is determined only with the phone so set. For setting instructions, see “Features for the Hearing Impaired” in the section entitled “Advanced Calling Features”. Note that not all hearing aids have telecoils in them.

Hearing aids may also be measured for immunity to interference from wireless phones and may have ratings similar to wireless phones. Ask your hearing health care professional for the rating of your hearing aid. Add the rating of your hearing aid and your phone to determine the estimated usability:

: Phones rated M3 or M4 meet FCC requirements for

: Phones rated T3 or T4 meet FCC requirements and are

•

Any combined rating equal to or greater than six offers excellent use.

•

Any combined rating equal to five is considered normal use.

HAC

Page 88

•

Any combined rating equal to four is considered usable.

Thus, if you use an M3 phone with a M3 hearing aid you will have a combined rating of six for “excellent use.” This methodology applies equally for T ratings.

More information about hearing aid compatibility may be found at: www.motorola.com/accessibility www.hearingloss.org/learn/cellphonetech.asp

HAC

, www.fcc.gov, www.fda.gov, and

Page 89

Information From the World Health Organization

WHO Information

Present scientific information does not indicate the need for any special precautions for the use of mobile phones. If you are concerned, you may want to limit your own or your children’s RF

exposure by limiting the length of calls or by using hands-free devices to keep mobile phones away from your head and body.

Source: WHO Fact Sheet 193 Further information: http://www.who.int./peh-emf

Product Registration

Registration

Online Product Registration: http://direct.motorola.com/hellomoto/

Motosupport/source/registration.asp Product registration is an important step toward enjoying your new

Motorola product. Registering helps us facilitate warranty service, and permits us to contact you should your product require an update or other service. Registration is for U.S. residents only and is not required for warranty coverage.

Please retain your original dated sales receipt for your records. For warranty service of your Motorola Personal Communications Product you will need to provide a copy of your dated sales receipt to confirm warranty status.

Thank you for choosing a Motorola product.

WHO Information

Page 90

Wireless: The New Recyclable

Recycling

Your wireless phone can be recycled. Recycling your phone reduces the amount of waste disposed in landfills and allows recycled materials to be incorporated into new products.

The Cellular Telecommunications Industry Association (CTIA) and its members encourage consumers to recycle their phones and have taken steps to promote the collection and environmentally sound recycling of end-of-life devices.

California Perchlorate Label

Perchlorate Label

Some mobile phones use an internal, permanent backup battery on the printed circuit board that may contain very small amounts of perchlorate. In such cases, California law requires the following label:

“Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

There is no special handling required by consumer.

Recycling

”

As a phone user, you have an important role in ensuring that this device is recycled properly. When it comes time to give this phone up or trade it in for a new one, please remember that the phone, the charger, and many of its accessories can be recycled. It's easy. To learn more about CTIA's Recycling Program for Used Wireless Devices, please visit us at: http://recycling.motorola.young-america.com/ index.html

Page 91

Patent and Trademark Information

Patent and Trademark

Microsoft and Microsoft Internet Explorer are registered trademarks of Microsoft Corporation.

T9 is a trademark owned by Tegic Communications.

Text Input Patent and Trademark Information.

T9 This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541,

U.S. Pat. 6,011,554 and other patents pending. Java and all other Java-based marks are trademarks or registered

trademarks of Sun Microsystems, Inc. in the U.S. and other countries.

All other product names or services mentioned in this manual are the property of their respective trademark owners.

Software Copyright Notice

The Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law. Furthermore, the purchase of the Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product.

Patent and Trademark

Page 92

Privacy and Data Security

Motorola understands that privacy and data security are important to everyone. Because some features of your phone may affect your privacy or data security, please follow these recommendations to enhance protection of your information:

• Monitor access:

leave it where others may have unmonitored access. Lock your device’s keypad where this feature is available.

• Keep software up to date:

software/application vendor releases a patch or software fix for your phone which updates the device’s security, install it as soon as possible.

• Erase before recycling:

data from your phone prior to disposing of it or turning it in for recycling. For step-by-step instructions on how to delete all personal information from your device, please contact your local service provider.

Privacy and Data Security

Keep your phone with you and do not

If Motorola or a

Delete personal information or

• Understanding AGPS:

emergency caller location requirements of the FCC, certain Motorola phones incorporate Assisted Global Positioning System (AGPS) technology. AGPS technology also can be used in non-emergency applications to track and monitor a user’s location, for example, to provide driving directions. Users who prefer not to permit such tracking and monitoring should avoid using such applications.

If you have further questions regarding how use of your phone may impact your privacy or data security, please contact Motorola at privacy@motorola.com, or contact TELUS Client Care..

In order to comply with

Page 93

Smart Practices While Driving

Driving Safety

Check the laws and regulations on the use of phones and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. Go to for more information.

Your phone lets you communicate by voice and data, almost anywhere, anytime, wherever wireless service is available and safe conditions allow. When driving a car, driving is your first responsibility. If you choose to use your phone while driving, remember the following tips:

• Get to know your Motorola phone and its features

• When available, use a hands-free

• Position your phone within easy reach.

Drive Safe, Call Smart

such as speed dial and redial.

features help you to place your call without taking your attention off the road.

If possible, add an additional

device.

layer of convenience to your phone with one of the many Motorola Original hands-free accessories available today.

access your phone without removing your eyes from the

www.motorola.com/callsmart

If available, these

Be able to

road. If you receive an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.

• Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions.

snow, ice, and even heavy traffic can be hazardous.

• Do not take notes or look up phone numbers while

• Dial sensibly and assess the traffic; if possible,

• Do not engage in stressful or emotional

• Use your phone to call for help.

Jotting down a “to do” list or going through your

driving.

address book takes attention away from your primary responsibility, driving safely.

place calls when your car is not moving or before pulling into traffic.

moving, dial only a few numbers, check the road and your mirrors, then continue.

conversations that may be distracting.

you are talking with aware you are driving and suspend conversations that can divert your attention away from the road.

emergency number in the case of fire, traffic accident, or medical emergencies.**

If you must make a call while

Driving Safety

Rain, sleet,

Make people

Dial 911 or other local

Page 94

• Use your phone to help others in emergencies.

see an auto accident, crime in progress, or other serious emergency where lives are in danger, call 911 or other local emergency number, as you would want others to do for you.**

• Call roadside assistance or a special non-emergency wireless assistance number when necessary.

serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.*

* Wherever wireless phone service is available.

If you see a broken-down vehicle posing no

Driving Safety

If you

Page 95

Index

accessories 9, 25, 67 active phone line 40 advanced calling 64

3-way calls 64

alert

set 61 turn off 43

answer a call 15

backlight 61, 68 battery 10, 12, 13

life, extend 10 battery indicator 40 Bluetooth

connect 35

send information 37 setting your phone 35 turning on or off 35

bluetooth 35

call

answer 15 end 15

make 15 call forward 49 caller ID 49 calls 47 center key 43 center select key 9 clock 68 combined power/end/home

key 14, 15

contacts 65

datebook 65

receive events via PTT 66

setup 62 dial a phone number 15 dialed calls 47 display 39 Drafts 22

earpiece volume 43 emergency number 50 end a call 15 export regulations 77

Index

Page 96

frequently asked questions

service and repairs 77

GPS 66 GPS enabled

emergency calls 50

GPS, see GPS enabled

handsfree 67 handsfree speaker 43 Hearing Aid Compatibility 85 home screen 39

incoming call message 49 international calls 50, 52 iTAP text entry mode 41

Index

language 68 low battery message 40

make a call 15 Memory

text messages 23

Message center

text messages 21 message indicator 40 messages 68

fax mail indicator 53 modem

using your handset

as a 23

navigation key 9, 43 net alerts 53

one touch PTT 31 optional accessory 9, 67 optional feature 9

packet data 40 PC applications 68 personalize 68 phone number 19 private calls

answer 17 call alerts 16 make 15

receive a call alert 17 PT manager 32 PTT 26

quick notes

create, edit 20, 22

Page 97

radio frequency 72 received calls 47 recent calls 47 recycling 88 redial 48 ring style indicator 40 ring tones

off 60, 61 setting 60 vibrate 60, 61

ringer volume 43

safety

radio frequency 72

RF energy interference 73 safety information 72 safety tips 91 security 69 send key 15

SIM card 10

change SIM PIN 69

enable SIM PIN 69 soft keys 39 speaker 40, 66 speed dial 51 store your number 19

Talk Around

channels 55

codes 55

emergency calls 58

private Talk

Around calls 57

setup options 58 tap text entry mode 42 text entry 40 text messages 19, 23

creating 21

deleting 22, 23

drafts 22

memory 23 message center 21 receiving 20 resend messages 22 sending 21 sent messages 22

setting up 19 transmitters 43 TTY calls 68 turn on/off 14

voice mail

advance voice mail with

fax 52 receiving 52 setting up 52

voice names 48 voicemail 52 volume 43

Index

Page 98

wallpaper 61 WHO information 87 wireless web 32

microbrowser

navigation 33

your phone number 19

Index