Telstra T1000S User Manual
HOW TO USE YOUR TELSTRA T1000S TELEPHONE FEATURES
Call
Return
Call
Back
Call
Back
Call
Back
To turn on Call Waiting
press
This feature enables you to answer a second call while you are on the phone.
When you are on a call and you hear two beeps:
Call
1. Press
to swap between callers.
Wait
2. Press to hang up one caller and return to the caller on hold.
3. Press
3-Way
to talk to both callers at the same time2.
Chat
Call
Wait
To turn off Call Waiting
press
Call
Wait
To make an enquiry call while you are on a call
This feature enables you to call someone while you are on a call.
During a call press
To return to the fi rst caller after the second person hangs up, press
otherwise press to end the second call.
To have a 3-Way Chat
2
This feature enables you to establish a 3-way conversation.
3-Way
press
Chat
To end 3-Way Chat simply
To turn on Call Forward
3
press
3-Way
Chat
This feature enables you to forward your calls to your mobile or another selected number.
press
Call
Fwrd
press
Call
Fwrd
To forward calls to a number stored in Memory
press
Call
press Memory
Fwrd
Call
Fwrd
To turn off Call Forward
press
To use Call Return
This enables you to check the number of your last unanswered call (*10#)
2. Applicable call costs and usage charges apply. Available most areas.
3. Applicable call costs apply for forwarded calls. Calls can be forwarded to most numbers in Australia.
4. Not available for blocked calls. Available most areas.
press
Call
Fwrd
4
press to connect.
HOW TO USE YOUR TELSTRA T1000S TELEPHONE FEATURES
To use Call Back when a number is busy
This feature enables you to arrange an automatic call back to a busy number.
When you hear busy tone, press
5
To cancel Call Back
Using Telstra Voice Assistant
Telstra Voice Assistanct can help you activate and de-activate Telstra Phone Features,
e.g. Call Waiting and Call Forward.
press
press
6
IMPORTANT SAFETY INSTRUCTIONS
For Your Safety
Do not use the telephone during an electrical storm as it is possible to get a shock.
Refer to the Telstra White Pages® directory for further information.
RENTAL TERMS AND CONDITIONS
Your rental telephone is subject to the terms and conditions set out in Part A - General
of the Basic Telephone Service Section of Our Customer Terms, which is available for
inspection at most Telstra shops or at www.telstra.com.au/customerterms/index.htm.
RENTAL TELEPHONE FAULTS
For any service diffi culties and faults call 13 2203 for Residential or 13 2255 for Small
Business customers or check the Telstra White Pages® directory for further contact numbers.
CARE OF THE TELEPHONE
• Avoid hard knocks and do not drop the telephone.
∑• Keep the telephone away from heaters.
• Clean the telephone surface with a damp cloth. Do not use detergents or immerse
the telephone in water.
• The performance of the telephone may be affected by electro-magnetic interference
if placed near radio transmitters, diathermy machines, welding machines, etc.
5. Applicable call costs and usage charges apply. Available most areas.
6. Available to most customers who are directly billed by Telstra for access and local calls.
© COPYRIGHT Telstra Corporation Limited. This work is copyright. All rights reserved.
This document is subject to conditions prescribed under the Copyright Act.
® Registered trade mark of Telstra Corporation Limited
™ Trade mark of Telstra Corporation Limited ABN 33 051 775 556.
C008 8-05
Telstra T1000S
Standard Rental Telephone
User Guide
To fully benefi t from this Australian designed and manufactured telephone,
please read the User Guide and keep handy for future reference.
1
Redial
2
3
4
T1000S Explanatory Diagram
1. Ringer and earpiece volume level.
2. Redial button used to easily redial
the last number dialled.
3. Store button used to store numbers
in one touch memories. This button
is also used to adjust ringer volume.
4. Telstra Voice Assistant button –
for voice control of phone features.
5. 10 One Touch Memory buttons.
6. Double sided memory card,
lift clear window.
7. One Touch phone feature buttons.
8. One Touch MessageBank button.
9. Recall button – used to make an
enquiry call.
10. Cancel button used to turn off
phone features, e.g. Call Wait.
GETTING STARTED
When you unpack the telephone you will need to ensure the cords are placed
in the slots provided in the base as shown in the diagram below.
Connect the telephone to a line, lift the handset and check for dial tone.
5
4
5
7
6
8
9
This ensures the telephone is powered up and will ring correctly.
Repeat this step whenever the telephone has been disconnected from the line.
An additional line
socket is located at
the rear to allow
connection of other
ACA equipment, e.g.
answering machine,
extension ringer or
modem.
Handset park groove is
located at the top edge
of the telephone.
Handset hook is set
in position by rotating
the dial.
Handset cord clamp.
TELEPHONE OPERATION
Last Number Redial
press
This redials the last number dialled.
Dialling from Memory
Select and press Memory button.
Programming the 10 Memory Buttons
Dial phone number
Note: Hang up after programming each Memory button.
Use 3-Way Chat button to enter a 1.5 second pause if required.
and select and press Memory button
Storing the Last Number Dialled into Memory
press
USING MESSAGEBANK®
select and press Memory button
1
If you are a MessageBank user, it’s now even easier to retrieve your messages.
Your T1000S is programmed to access Telstra Home Messages 101® and MessageBank.
To retrieve a message from your MessageBank
press
press
Mesg
Bank
Mesg
Bank
Mesg
Bank
and follow the MessageBank prompts.
press press
Mesg
Bank
Mesg
and then follow the message service prompts.
Bank
press press
Mesg
enter access number press
Bank
Mesg
Bank
Wall Mounting
A wall-mounting bracket can be
purchased separately from Telstra.
Wall mounting diagram
TELEPHONE OPERATION
Adjusting the Ringer Volume when the telephone is idle
The ringer has two levels, high and low.
press then or
Setting will be saved. Confi rmation tone will stop at minimum or maximum setting.
Adjusting the Ringer Volume when the telephone is ringing
Press or
while the phone is ringing.
Adjusting the Headset Earpiece Volume Setting
press or
Adjusts the handset earpiece volume to one of four levels. Confi rmation tone
will stop after min or max setting.
Note: The earpiece volume will reset to normal when the handset is replaced.
The T1000S also provides a magnetic coupling in the handset for use with hearing
aids with a ‘T’ position switch.
To Fix the Earpiece Volume
press or to adjust the volume and press
To have the volume reset to normal when the headset is replaced
press or to adjust the volume and press
You can store your PIN under the MessageBank Button
press
Note: A PIN is not required for Telstra Home Messages 101.
To retrieve a message from your message service when you have stored your PIN
Wait for the password prompt, press
To delete your PIN
press
You can change the programmed number to access other messaging services,
e.g. MessageBank Virtual and MessageBank Combined.
To change your MessageBank access number to access other messaging services
press
1. Monthly charges may apply.
Loading...