![](/html/17/17f0/17f01fef829ddbe7af041512d6211591e59987d525cb8253d6f24b944d763a45/bg1.png)
Wake Up Box – OAS Model
On Site Installation Instructions
www.telquipstore.com
800-317-0847
tom@telquip.com
1
![](/html/17/17f0/17f01fef829ddbe7af041512d6211591e59987d525cb8253d6f24b944d763a45/bg2.png)
Purpose & Description
• AT&T Set Top Boxes have an energy saving “sleep” feature
that powers down the Set Top Box if not used in a
pre-determined amount of time.
• This equipment insures the system will never go into “sleep” mode by
emitting IR to “wake up” the Set Top Box.
• The Wake Up Box – OAS model is designed to service a shelf of Set Top
Boxes, usually up to seven, or a single display. Adaptations also allow the
use of both a WUB-OAS and a U-verse RF Remote emitter (page 4).
Special procedures are also used with IR emitters (page 6).
• This equipment is often used together with a Mini Head-End for use in
exercise rooms of MDU’s and other common areas.
2