Page 1
9 USER GUIDE
Telital DMUT User Guide
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Rev. 0Telital S.p.A.
Page 1 of 1
Page 2
Telital S.p.A.
9.1 General
This guide provides all the necessary information for the correct use of the
GS–GSM DMUT.
Figure 1 show the DMUT with a brief description of keys function.
GS/GSM Status Led
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Rev. 0
Power
GS/GSM mode selection
Phone Book
Scroll Scroll
Figure 1
Menu
End
Send
Clear
SMS
Soft Keys
Page 3
Telital S.p.A.
9.1.1 Display and indications
The display show all status and menu of GS–GSM DMUT during the operations.
Icons and bitmaps tells to the user all situations and operating modes, telephone
numbers, messages, battery charge status, time and other useful informations
(see fig. 2).
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
GRAPHIC AREA
Rev. 0
9.1.1.1 Icons
Figure 2
This icon indicates a programmed alarm.
This icon blinking, indicates an alarm time–out
This icon indicates an Hands–free device (car kit) connected.
This icon indicates the received signal intensity both in GS and GSM
mode. The number of active bar indicates the signal intensity.
This icon displayed in the graphic area indicates an active
conversation.
This icon indicates the SMS function activation and voice mailbox
messages presence.
This icon indicates the battery charge status.
Clock
Page 4
Telital S.p.A.
9.1.1.2 Status indications
The status of the dual mode telephone will be given by a led on the front panel and
icons on LCD display graphic area.
LED status ON = GS operating mode;
LED status OFF = GSM operating mode;
Icon on Display for the ”GS Maintenance Required” indication;
Icon on Display for the ”GS Lock” indication.
9.1.2 Battery charger
The DMUT have a rechargeable Lithium ion battery pack and a battery charger.
When the battery charge level becomes low, the icon
when the icon
empty is blinking, is necessary to connect the battery charger
to the DMUT.
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Rev. 0
shows this status and
The graphic symbol
charge operation.
The bitmap . is shown during a battery charge operation with the
DMUT turned off.
9.1.3 Car kit
The car kit option allows to connect the DMUT to the vehicle with battery charge
and hands free functionality.
9.1.4 Operation
9.1.4.1 Minimal functionality
The following operations allows to turn on the DMUT, place a call and then turn
off the DMUT.
Insert your plug–in SIM card into the slot
Press
(POWER) for 1 second to switch on the unit
If PIN is enabled:
is shown when the telephone is operating during a battery
PIN>
SOS
If inserted PIN is correct the unit starts network auto search.
In G* mode the following will be displayed:
Searching GW
...
In GSM mode the following will be displayed:
Net Search
** GS/GSM DMUT **
at the end of the search the following will be displayed:
Page3of12
Page 5
Telital S.p.A.
where the first line indicates the antenna icon (flashing during network auto
search) followed by radio signal intensity (up to 4 bars) and the second line the
name of the network operator, or the gateway ID and then the service provider
name in G* mode.
If inserted PIN is wrong the following will be displayed:
where X on the second line indicates the number of possibilities left to retry correct
PIN entering.
If the wrong PIN is entered for three times the following will be displayed:
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Net Provider
** GS/GSM DMUT **
PIN>
Remain X retries
PUK>
Rev. 0
Remain X retries
Key in * 05 *, the 8 PUK digits provided by the network operator, press
* (new PIN) * (new PIN) and then #.
Warning: If you cannot remember your PUK code or you enter a wrong one for
10 times, you have no other possibility but that of contacting the network operator
who issued your SIM card.
If you inserted the correct PUK appeares a success graphic symbol that indicates
that PUK is valid and then the operative mask.
Now you can place and receive calls.
To switch off the unit: press and release
(POWER).
The following ”Good Bye” graphic screen will be displayed:
Good Bye!
To place a call: dial the number and press (SEND).
Mistakes in digiting have to be corrected by pressing shortly " " key.
If you keep " " key pressed for longer time, all digits will be cancelled.
Emergency calls can be placed also if the SIM card is not inserted.
To receive a call: Press
(SEND) or any other key if programmed in the menu.
When using the handset: pick up the handset.
To end a call: Press
To adjust listening level: Press
(END).
and long during conversation.
Page4of12
Page 6
Telital S.p.A.
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Rev. 0
Mute function: Keep pressed
(POWER) for more than 1 second during
conversation.
Keypad lock: Keep # pressed for 2 seconds: selected function will be displayed
by lock symbol. Keep press the same key for 2 seconds and press the key "5" to
unlock keypad.
Net Provider
9.1.5 Phone book
9.1.5.1 Storing a number
Key in the number to be stored. By pressing "C" the last digit will be cancelled; if
you press "C " for longer time all digits will be cancelled.
Press
.
The following screen will be displayed:
Enter name
Key in the name: keep the alphanumeric key pressed until the desired letter
appears on the display.
Key " 1 " contains the space and special characters, whereas key"*"switches
between capital and small letters.
Press
press
Press
(SEND) to store your selection in the first free memory location and
(SEND) to confirm.
(END) to exit from phone book without save any number.
9.1.5.2 Recalling a number from phone book
Press XX and #, where XX is the desired memory location number,
or:
Press
and with or scroll through all the allocated memories in
alphabetical order or by telephone number order or by memory location order.
The search criteria is defined by pressing the "M" key corresponding to
">>"symbol on display.
The following screen will be displayed during a phone book operations:
Name mem
Number
Page5of12
Page 7
Telital S.p.A.
By pressing ”C” the last character will be cancelled, and if you keep ”C” pressed
for longer time all characters will be cancelled.
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Rev. 0
When the desired location appears on the display, press
(SEND) to place the
call.
When recalling a memory location not available on the SIM card the following will
be displayed:
No record
New record?
ADN Memories: Available memory locations in SIM card. Available quantity
depends on the SIM card you have chosen.
FDN Memories: Also contained in the SIM card with same features as ADN
memories. Activation of FDN memories must be performed from the menu and
by entering the PIN2 code which is not always supplied by the network operator .
9.1.6 Function menu
Press "M" key followed by the number key corresponding with the desired menu
number or,
Press "M" key to going to the menu.
Press
and or press the "M" key to browse the menus.
Confirm the access on the desired menu by pressing (SEND) key.
To exit from menu without save the settings press
(END) key.
To exit from menu and save the settings press (SEND) key.
If a ”Proactive” SIM is inserted into a DMUT, a menu item 0 will be displayed.
By selecting this item, access will be given to the SIM Toolkit services supplied by
the network operator.
After 3 minutes of inactivity on the menu operations, the operative condition will
be automatically restored.
The following diagrams show the function menu structure.
Page6of12
Page 8
Telital S.p.A.
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Rev. 0
MENU
0
SIM Toolkit menu
1
Own number
2
Missed calls
Call divert
3
1
Divert always
2
3
DivMissedCalls
4
Fast divert
Cancel
1
2
3
Choose forward
Choose forward
All
1
2
3
Div missed calls
Unconditional Divert
On
Off
Parameters
Cancel
Cancel
All teleservice
Speech
Fax
Data async
If busy
If not reachable
If no reply
All missed calls
Choose forward If busy
If not reachable
If no reply
All missed calls
Choose forward All teleservice
Speech
Fax
Data async
4
Clock
1
Set Enter time Enter Date Enter Day
Set
2
Alarm
Enter time Choose days Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Everyday
Never
<Sunday>
<Monday>
<Tuesday>
<Wednesday>
<Thursday>
<Friday>
<Saturday>
Page7of12
Page 9
Telital S.p.A.
MENU
5 Settings
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
1
Audio
1
Ringing
1
2
Tone
Volume
(1 4 ) Standard 1 4
(5 8) Melody 1 4
9) User defined
1
Off
2
Low
3
Medium
4
High
5
Incremental
Rev. 0
3
Vibro-Call
2
Keypad-Volume
3
Warning tones
4
5
2
Display
Service Beep
DTMF On
1
Brightness
2
Bright. length
1
2
3
1
2
1
2
3
1
2
1
2
3
1
2
Off
Low
High
On
Off
On
OnlyNoServ
Off
Off
Off
Short
Long
On
Off
3
4
5
6
7
Language
Auto answer
Any key answer
Call waiting
Keyboard lock
3
PersonalMessag
4
Contrast
1
On
2
Off
1
2
Page8of12
1
Fixed
2
Rotating
1
English
Italiano
2
3
Deutsch
4
Francais
5
Espanol
6
On
Off
1
On
2
Off
1
On
2
Off
7
8
9
10
11
12
Norsk
Magyar
Polsk
cestina
Portugues
Automatic
Page 10
Telital S.p.A.
MENU
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Rev. 0
6 Security
1
2
3
Pin control
Phone security
Enter
Security code...
Call barring
1
2
3
1
2
Change PIN 1
Change PIN 2
PIN request
1
2
3
4
5
Outgoing
Incoming
1
2
Type
Clear SIM list
Change code
Autoblock
Restore default
Choose forward
Choose forward
Enabled
Disabled
1
2
3
1
2
3
On
Off
SIM list
On
Off
Change code
Outgoing calls
International
Only to home
Incoming calls
Call if abroad
7
GSM networks
3
Cancel
Change code
4
4
Fixed dialling
1
Search network
2
3
Network list
4
Home network
Auto selection
1
On
2
Off
1
On
2
Off
Preferred nets 1 16 Available nets 1 16
Choose forward
Incoming calls
Call if abroad
Outgoing calls
International
Only to home
Page9of12
Page 11
Telital S.p.A.
MENU
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Rev. 0
8
Call control
1
2
3
4
Minute beep
Call duration
Charge rate
Trans. own no.
1
On
2
Off
1
Last call
2
Incoming home
Incoming roam
3
Outgoing home
4
Outgoing roam
5
6
Total time
7
Clear timers
1
Last call
2
All calls cost
Cost control
3
Reset
4
Units account
5
1
2
3
For all calls
Transmit
Don't transmit
Restrict. control
1
Transmit
2
Don't transmi
3
Net Default
9
Information
5
CUG
6
NITZ
1
IMEI
2
Software
SIM info
3
Total life
4
1
2
3
CUG Index
Suppr. CUG
Suppr. OA
Enabled
Disabled
ON
OFF
ON
OFF
Page 10 of 12
Page 12
Telital S.p.A.
9.1.6.1 SMS menu
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Rev. 0
SMS
MENU
Pressing the
is available the SMS (Short Message Service) menu.
This menu allows to send and receive short text messages (SMS), to receive messages from the network operator and other supported services.
The following diagram show the SMS menu structure.
1
2
Call mailbox
Messages
Choose forward
Write new
1
2
Received
3
Written
4
Parameters
Autodelete
5
6
Reply path
Mailbox number
SMS center n. Message:
1
SMS center
2
User defined
3
Phone param.
1
On
2
Off
1
2
nndd/mm/yy hh:mm
From:
message:
Select param. Name
Activate
Deactivate
1
2
SMS-Center no.
3
Validity
4
Destination
5
Protocol Id
Set default
6
Status report
7
Information
8
Active only if DMUT is operating in GSM mode.
1
2
3
4
Message
Activation
Languages
List
3
Broadcast
1
2
3
4
5
1
On
2
Off
3
Auto display
District
Flashes
Weather
Index
5 - 10 Empty
1
2
1
2
3
4
5
6
7
8
9
10
11
12
On
Off
English
Italiano
Deutsch
Francais
Espanol
Norsk
Magyar
Polsk
cestina
Portugues
Automatic
Page 11 of 12
Page 13
Telital S.p.A.
9.1.6.2 Globalstar Menu
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Rev. 0
Pressing the
key is available the Globalstar menu.
This menu partially active only in idle mode, allows to manually select the way of
operating at power on of the DMUT.
The following diagram show the MS menu structure.
MODE
SELECTION
MENU
1
2
Mode
Positioning
1
2
3
4
1
2
3
GS only
GSM only
GS preferred
GSM preferred
Error display
Position
Last Pos.
Active only if DMUT is operating in IDLE mode.
Active only if DMUT is operating in GS mode.
1
On
2
Off
3
4
5
GS service
Local Time
Test
1
2
3
4
Search network
1
Auto selection
2
3
Network list
Start test call
End test call
Markov stats
Satellite Info
1
On
2
Off
MARKOV 9600
MARKOV 4800
LOOPBACK 9600
LOOPBACK 4800
Enable
Disable
Page 12 of 12
Loading...