Telikou BK-501 Instruction Manual

TELIKOU

Intercom System

BK-501 Belt Pack

Instruction Manual

© 2006 TELIKOU Systems

All Rights Reserved
www.telikou.com

TELIKOU BK-501 Belt Pack

1

 Introduction
Thank you for choosing TELIKOU intercom product. BK-501 beltpack can work with any
TELIKOU Intercom standard main station, and it is suitable for TV station, communication
command center, outside broadcast van, show, project test field, and other applications
where communication is required.
This system adopts wired connection, and has following features, free of external
emission interference, stable and reliable performance, flexible configuration, full-duplex
communication, clear and loud communication sound, easy operation, and strong noise
resistance.

 Quick start

1. Connect the BK-501 belt pack to an intercom main station by XLR-3 cable. If belt pack
receives DC power, the Power LED will light.

2. Turn volume control knob to the end by anticlockwise rotation, then plug in the headset.

3. Press ‘Mic’ button will light the green indicator which indicates the microphone is turned
on.

4. Adjust sidetone (Sidetone adjustment is next to the belt-clip) and volume level; make
sure the voice level which you heard from earphone is the minimum.

5. Press Call button to send a signal to main station.

6. When the communication is finished, press ‘Mic’ button again to turn off the
microphone. The microphone indicator will off as well.