TE-3X48WW PARLED AQUA
PARLED
TE-3X48WW
USER MANUAL
a qua
ADD : 19 Lacist St. Wesbrark, Maine, U.S.A. (04092) sales@te-lighting.com
Phonel : (1) 207-712-3004 http://www.te-lighting.com
TE-3X48WW PARLED AQUA
.
S
TABLE OF CONTENT
PART 1 PRODUCT (GENERAL).................... ................................1.
1.1--PRODUCT INTRODU CTION.............................. ...........................1.
1.2 PRODUCT FEATURES-- .................................................................1.
1.3 TECHNICAL SP ECIFICATIONS-- .....................................................2.
1.4 PHOTOMET RIC DATA-- ..................... ...................... ...................... .3.
1.5 SAFETY WARNING-- ................................................... ...................3.
PART 2 INSTALLATION...................... .........................................4.
2.1--MOUN TING............... .............................................. ......................4 .
2.2--POWER CONNECTION.................... ....................... .......................4.
2.3--SE TTIN G UP WITH A D MX512 CONTROLLER.................................5.
2.3-1 --DMX512 A DDRESSING WITHOUT ID ADDRESSING.......... .......... ... ............. ..5.
2. 3 - 2--DMX512 ADDRESSING WITH ID AD DRESS........................ .... ......................5.
PART 3 DISPLAY PANEL OPERATION.........................................6.
3.1--BASIC..........................................................................................6.
3.2--MENU.............. ............................................................ ............ ....6.
3.3 -- EDIT STATIC COLOUR.................................................................7 .
3.4- -RUN MODE....................... ........................................... ................ 7.
3.5-- DMX512 SETTINGS.......... ............................................................7 .
3.6-- PERSONA L ITY ...................... ................................ .......................7.
3.7--ID ADDR ES S................................................................................7.
3.8--SPEC IAL SETTINGS........................ ........................ .....................8.
3.9-- ....... ....................... ......................................... 8.WHITES SETTING
3.10--A CTIVATE THE P ASSWORD ...................................................... 8.
PART 4 USING A DMX512 CONTROLLER....................................9.
4.1--BASI C ADDRESSING.............. ..................................... ..... .........9.
4.2--CHANNEL AS SIGNMENT........................................................... .90.
4.3--BASIC INSTRUCTIONS FOR DMX5 12 OPERATION.... ..................11.
PART 5 APPENDIX......................................................................12.
5 .1--TROUBLE SHOOTING...............................................................12.
5.2--M AINTENANCE......................................................................... 13
ADD : 19 Lacist St. Wesbrark, Maine, U.S.A. (04092) sales@te-lighting.com
Phonel : (1) 207-712-3004 http://www.te-lighting.com
1
PRODUCT (GENERAL)
1.1 PRODUCT INTRODUCTION
This product is designed for in door or outdoor use. Suitabl e applications include wash or
e ff e ct lig h ti n g f o r a r chi t e c tu ra l, s ta g e, t he a t re or r oad s ho w ap p l ica ti o n s. D ir e c t i np u t of
DM X512 signal allows the units to be controlle d from any DMX512 controller. This pro duct
can be operated as a single unit or in multiple units for large applications.
1.2 PRODUCT FEAT URES
LED FIXTURE
* IP67 protection rating
* Linear / Non linear dimmer
* Strobe
* Upload custom parameters to sla ve fixtures
* LED display
* Display control 'lock-out'
* Direct DMX512 inpu t
* Independent ID address
* Diff erent white colors setting
* 'Over-hea t' protection
TE-3X48WW PARLED AQUA
1
ADD : 19 Lacist St. Wesbrark, Maine, U.S.A. (04092) sales@te-lighting.com
Phonel : (1) 207-712-3004 http://www.te-lighting.com
1.3 TECHNICA L SPECIFICATION
S
LED MO DULE
L ED MODULE:
Vo lt a g e
Rated Power
LED/Un it
Output/LED
Environment Tem perat u re
Co o l in g
Dimensions
10 0~250V.. .50/60Hz
IP
Weig ht
300m m
150W
IP67 prote ctio n ratin g
48pcs (12 x Cool white / 36 x Warm white)
3W
-20 ~40℃℃
Direc t air convection
335 x 300 x 235 m m
9Kg
TE-3X48WW PARLED AQUA
210mm
335mm
235mm
2
ADD : 19 Lacist St. Wesbrark, Maine, U.S.A. (04092) sales@te-lighting.com
Phonel : (1) 207-712-3004 http://www.te-lighting.com
1.4 PHOTOMETRIC DATA
TE-3X48WW PARLED AQUA
COO L WH I TE
3
2
1
0
1
2
3
876 0
2
2 060 980 578 398 LUX
4
6 8 10D is ta n ce ( m)
15°
COO L WH I TE+WA R M WHIT E
3
2
1
0
1
2
3
12160
2468
3110 1494 890 575 LUX
15°
10Distance(m)
1.5 SAFETY WARNING
IMPORTANT
A LWAYS READ TH E USE R MANUAL BEFO RE OPERATI ON .
【】
PLEASE C O N FIRM T HAT THE POWER SUPPLY STATED ON THE
【
PRO DUCT IS T HE SAME A S THE MAINS PO W ER SUPPLY I N YOUR
AREA.
This pr odu ct must be installed by a qualified professional.
●
Always ope rate the equipment as descri bed in the use r manual.
●
A mi n i mu m d i sta n c e of 0 . 5m mus t be m a i n t ai n ed b etween th e e q ui pm e n t and
●
combustible surface.
The product m ust always be placed in a well ventilated area.
●
Always make sure that the eq uipment is installed securely.
●
DO NOT s ta nd c lo se t o the e qui pme n t and stare d ir ectly into the LED l ight
●
source.
●
Always disconnect the power supply before attempting and maintenance.
Always make sure that t he supporting structure is solid and can support the
●
combined weight of the products.
The earth w ire must always be connected to the groun d.
●
Do not t o uch the power cables if yo u r hand s are wet.
●
】
WA R M WHI TE
3
2
1
0
1
2
3
416 0
2
1022 53 3 257 204 LUX
4
6 8 10Distanc e(m)
15°
ATTENT ION
This product left the p lace of manufactu re in perfect condition. In or der to
●
maintain this condition and for safe operation, the use r must always follow the
instructions and safety warnings described in this user manual.
●
Avoid shaking or strong impacts to any part of the equipment.
●
Make sure t hat all parts o f the equipmen t are kept clean and free of dust.
Always mak e sure that the power connections are connected correct and
●
secure.
If there is an y malfunction of the equipment, contact your distributor
●
immediately.
●
When trans ferring the product, it is advi sable to use the original packaging in
which the product left the factory.
Shields, lenses or ultraviolet screens shall be changed if they have become
●
damaged to such an extent that their effectiveness is impaired.
●
The lamp (LED) shall be changed if it has bec ome damaged o r thermally
deformed.
3
3
ADD : 19 Lacist St. Wesbrark, Maine, U.S.A. (04092) sales@te-lighting.com
Phonel : (1) 207-712-3004 http://www.te-lighting.com
2
IN STALLATION
2.1 MOUNTING
HANGING
The fixture can be mounted in a hangi ng position
using the supporti ng bracket. The bracket
should be secured to the mounting truss or
structure us ing a standard mounting clamp.
Please note that when hanging th e unit a safety
cable shoul d also be used.
UPRIGHT
TE-3X48WW PARLED AQUA
The fixture can be mounted in an upright or
sitting position usin g the supporting brackets.
The LED MODULE can be mounted at any an gle and in any
position. It is poss ible to furt her adjust the an gle of the LED
MODULE using the two adjustment knobs located on the side of
the fixture.
2.2 POWER CONNECTIONS
@ 22 0V: 15 units may be connected in series
@120V: 7 units may be connected in series
Note:
1 . A s t h is fi x t u re ' s DM X si g na l c able c o n n ecti on i s P a ra l l e l co nn e c t ion , so if ov er 32 un i t s to b e
connected, then a DMX signal amplifier is needed.
2. If th e signal cable is over 60m between the D MX512 c ontroller and fixt ure or beween two
fixtures, then a DMX signal amplifier is ne eded as well.
4
ADD : 19 Lacist St. Wesbrark, Maine, U.S.A. (04092) sales@te-lighting.com
Phonel : (1) 207-712-3004 http://www.te-lighting.com
TE-3X48WW PARLED AQUA
2.3 SETTING UP WITH A DMX512
CONTROLLER
2.3-1 DMX512 ADDRESSING WITHOUT ID ADD RESSING
MODE)(Std.2
●
Connect the DMX512 controller to the units in series.
Each unit has 6 DMX channels so the DMX Addresses should increase by increments of
●
6 (e.g. 1,7,1 3,19...)
●
The ID address has not been set so th erefore when using the controller Ch6 must
be inactive ( CH6=0 ).
It is also possible to deactivate ID address selecting from the menu.
●
on the fixture
●
Each DMX Address m ay be used as many times as required.
Any DMX address in the range from 001 to 512 may be used.
●
Example:
DM X Addr.1 DMX Addr.7 DMX Addr.13
【】 【 】ID OFF Settings
........ ....
DM X 512
CON TRO LLE R
The figure above shows a simple DMX512
layout with the starting address of t he first
unit set at 1, with the second set at 7 and
so on... (Note that whe n used in this way,
the CH6 ID function must be inactive (CH6=0))
2.3-2 DMX512 A DDRESSING WITH ID ADDRESS MODE)(Std.2
Connect the DMX512 controller to the units in series
●
Each unit has 11 DMX cha nnels so the DMX Addresses should increase by increments of
●
6 (e.g. 1,7,1 3,19...)
Each DMX Address may be used as many times as required.
●
Any DMX address in the range from 001 to 512 may be used.
●
Each DMX address may carry up to 66 separate ID addresses.
●
should be set in the menu on each unit in a scending value s
【】
ID
●
(i.e . 1,2,3...)
【】 【 】
ID On Settings
●
ID addresses are a ccessible from CH6 on the DMX512 controller.
●
should b e set in the menu on each unit.
DMX Addr.1
ID A dd r.1
DM X A ddr.1
ID Addr.2
DM X Ad d r.1
ID Addr .3
DMX Addr.7
ID Addr.1
DM X Addr .7
ID Add r .2
DMX Addr.7
ID Add r.3
Example:
DMX512
CONTROLLER
The figure above shows a simple DMX layout
which has used three units at each DMX addre ss.
The three units have different ID addresses which
allows the user to collectively control the whole
group of units at that DMX address by setting
CH6 to 0, or to control each uni t independently by
first selecting th e DMX address and then by us ing
CH6 to locate th e target ID address.
............
5
ADD : 19 Lacist St. Wesbrark, Maine, U.S.A. (04092) sales@te-lighting.com
Phonel : (1) 207-712-3004 http://www.te-lighting.com
3
DISPLAY PANEL OPERAT ION
3.1 BASIC
The LED fixture is mounted with a LCD display and 4 control buttons.
TE-3X48WW PARLED AQUA
MENU
ENTER
scroll through the main menu or return to
the m a in menu
enter the currently selected menu or
confirm the current function value
scroll 'UP' th rough the menu list or increase
the value of the current func tion
scroll 'DOWN ' through the men u list or decr ease
the value of the current functio n
3.2 MENU
MENU
STAT
RUN d MX
DMX
PERS
ID
SET
CAL1
W(0~255)
C(0~255)
ST(0~20)
SLAV
d(001~51 2)
STd.w
STd.d
STd.1
STd.2
ID( 01~ 66)
UPL d
REST
Id ON
POW
dIM
WT01
WT02
OFF
HIGH
NORM
OFF
dIM1
dIM2
dIM3
dIM4
W(0~255)
C(0~ 255)
MENU
ENTER UP
DOWN
WT07
KEY ON
OFF
6
ADD : 19 Lacist St. Wesbrark, Maine, U.S.A. (04092) sales@te-lighting.com
Phonel : (1) 207-712-3004 http://www.te-lighting.com
3.3 E DIT STATIC COLOU
R
TE-3X48WW PARLED AQUA
MENU
STAT
STATIC COLOUR【】
Combine and to create whites with different
●【 】【 】
color temperatu re
Set the value o f the (0-20Hz)
●【】Strobe
W(0~255)
C(0~255)
ST(0~20)
WA RM WHITE COOL WHITE
3.4 RUN MODE
MENU
RUN DMX
RUN【】
Enter the mode to set working mode.
●
●
mode is for using the DMX512 contro ller to control the fixtures.
【】
mode is for Master -- Slave operation.
【】
●
【】
DMX
SLAV
SLAV
RU N
3.5 DMX512 SETTINGS
MENU
DMX
D(001~512)
DMX【】
Enter the mode to set the DMX ADDRESS.
●
【】DMX
3.6 PERSONALIT Y
MENU
PERS
PERSONALITY【】
Enter the mode to select D M X mode:
●
【】【】
STd.1 STd.2
【】 【 】【 】
PERS STd.w , S Td.d ,
or .
STd.w
STd.d
STd.1
STd.2
3.7 ID ADDRES S
MENU
ID
ID【】
ID (01~66)
Enter the mode to set the ID ADDRESS.
●
【】ID
7
ADD : 19 Lacist St. Wesbrark, Maine, U.S.A. (04092) sales@te-lighting.com
Phonel : (1) 207-712-3004 http://www.te-lighting.com
3.8 SPECIAL SETTING
S
TE-3X48WW PARLED AQUA
MENU
SET
SETTING
【】
UPLD
【】
Select to upload the custom pro grams from the current MASTER unit to
●
UPLd
REST
Id ON
POW
dIM
OFF
HIGH
NORM
OFF
dIM1
dIM2
dIM3
dIM4
the SLAVE u nits.
In order to activate the upload function the password must be entered.
●
●
Password is the same as the main access password.
When uploading the MASTER and SLAVE units will be black out.
●
●
On successful uploading of the custom programs the MASTER and SLAVE units
will display Cool White.
●
In order to reset custom modes to default values select .
●
Enter in order to allow/disallow ID a ddress functio n from the DMX512
ID
【】
REST
【】
controller.
●
POW NORM HIGH
【】 【 】【 】
Enter to choose t he operation power mode or ,
when it is normal mode, the power consumption is about 90W, while under high
mode, it is about 150W.
dIM
【】
Enter to select dimmer mode and dimmer speed. When DIMME R is set to
●
Off
【】
, then RGBW and MASTER DIMME R are linear. The Dim 1/2/3/4 are speed
modes of the non linear dimmer , is the faster, while is the slowest.
dIM STA G
【】 【 】
●
The setting here does not react on the the mode.
dIM1 dIM4
【】 【】
3.9 WHITES SETTING
MENU
CAL1
WT01
WT02
WT07
CAL1【】
Enter the to select white color of different color temperature.
●
There are 7 pre-programme d White colors can be edited
●
by using & .
When DMX mode is , these 7 wh ites wi ll be sh owed on CH4.
【】
CAL1
【】【 】
Coolwhite Warmwhite
【】
Std.2
W(0~25 5 )
C(0~ 255)
3.10 A CTIVATE T HE PASSWORD
MENU
KEY ON
OFF
KEYLOCK【】
●
Enter the mode to select whether the access pas sword is on or off.
●
In order to enter access password it is necessary to first press .
Access password is + + + .
●
【】
KEY
【】【 】【 】【 】
UP DOWN UP DOWN
8
【】
SET
ADD : 19 Lacist St. Wesbrark, Maine, U.S.A. (04092) sales@te-lighting.com
Phonel : (1) 207-712-3004 http://www.te-lighting.com
4
USING A DMX512 CONTROLLER
4.1 BASIC ADDRESSING
Connect all of the units in series using standard DMX512 signa l cable or the IP65 rated cable
●
provided.
●
Set the DMX5 12 address in the menu.
It is possible to have the same DMX addres s or independent addresses for each fixture.
●
【】DMX
4.2 CHANNEL ASS IGNMENT
●
Note: This product have three DMX512 channel configuration:
【】【】
Std .w
an d
Std.1 Std.2
CHANNEL FUNC TIONVALUE
TE-3X48WW PARLED AQUA
【】【】
Std.w , St d.d ,
Std .d
Std .1
1
2
CHANNEL FUNC TIONVALUE
1
2
3
CHANNEL FUNC TIONVALUE
1
0 255
0 255
0 255
0 255
0 255
0 255
WARM WHITE
COO L WHIT E
MASTE R DIMMER
WARM WHITE
COO L WHIT E
MASTE R DIMMER
2
ADD : 19 Lacist St. Wesbrark, Maine, U.S.A. (04092) sales@te-lighting.com
0 255
WHITE MACRO
9
Phonel : (1) 207-712-3004 http://www.te-lighting.com
Std .2
CHANNEL FUNC TIONVALUE
1
2
3
4
5
6
0 255
0 255
0 255
0 10
11
40
41
70
71
100
101
130
131
160
161
190
191
255
0 9
10 255 1~20 Hz
0 9
10 19
20 29
30 39
40 49
50 59
60 69
70 79
80 89
90 99
100 109
110 1 19
120 129
130 139
140 149
150 159
160 169
170 179
18 0 189
200 209
TE-3X48WW PARLED AQUA
MASTE R DIMMER
WARM WHITE
COO L WHIT E
WH I T ES MA C RO
N O FUNCTION
WHITE 1: 3200K (Factory Calibrating)
WHITE 2: 3400K
WHITE 3: 4200K
WHITE 4: 4900K
WHITE 5: 5600K (Factory Calibrating)
WHITE 6: 6500K
WHITE 7: 7200K
STRO BE
N O FUNCTION
ID ADDRESS
ID1~ID66
ID1
ID2
ID3
ID4
ID5
ID6
ID7
ID8
ID9
ID10
ID11
ID12
ID13
ID14
ID15
ID16
ID17
ID18
ID19190 199
ID20
ID21210
ID66255
10
ADD : 19 Lacist St. Wesbrark, Maine, U.S.A. (04092) sales@te-lighting.com
Phonel : (1) 207-712-3004 http://www.te-lighting.com
TE-3X48WW PARLED AQUA
4.3
MASTER DIMMER
CH1 controls the intensity of the currently p rojec ted color
●
●
When the slider is at the hig hest position (255) the intensity of the output is the maximum
COO L WHITE & WARM WHITE SELECTION
CH2 and CH3 control the intensity ratio of each of the WARM WHITE & COOL WHITE LEDs.
●
●
When the slider is at the highest position (2 55) the intensi ty of the color is the maximum.
●
CH2 and CH3 can be combined together to create whites with different color temperature.
STROBE
CH 5 controls the strobe of C H1 to CH4
●
CH5 has priority over CH2, CH3 & CH4.
●
WHITE MACRO
Ch4 allow user to select 7 white s with different color temperat ure.
●
The 7 whites are took from the on Display panel.
●
ID AD DRESS SE LECTIO N
CH6 is used to select the target ID address.
●
●
Each indepe ndent DMX address may have upto 66 independent ID addresses.
●
An ID address of 0 will activate all ID address locations.
BASIC INSTRUCTIONS FOR DMX512
OPERATION (STAGE1)
【】CAL1
11
ADD : 19 Lacist St. Wesbrark, Maine, U.S.A. (04092) sales@te-lighting.com
Phonel : (1) 207-712-3004 http://www.te-lighting.com
5
APPENDIX
5.1 TROUBLE SHOOTING
SITUATION CAUSE ACTION
1) No power in put
2) Power connection er r or
No d isp lay
LED MODULE
on , but no con tro l
fr om display
Displ ay normal,
bu t no resp onse
from buttons
No DMX signal
W h en the s urf ace
te mpe ratu re of the
unit exceed 75 , the
te mpe ratu re prote ctio n
no work .
Color mix ing
unev en,wit h splash
Pa rtial color
pa rt ial warm wh i te,
part ial cool white（）
LEDs o f the same
co lor are not lit
Manual and program
can not save
℃
3) Displ ay damaged
4) Display board IC error or power i nput
connection error or two boa rd connection
erro r
5) Contrast deca y
1) Display IC reverse install
2) Displ ay IC damaged
1 ) Button s dama ged
2) Displa y IC d amaged
1) S ignal C abl e error
2) Signal connceti on error
3) The DMX signal receive IC damaged
4) DMX addr ess err or
1) The heat sens o r r esistance of LED board
error
2) The temperature protection cir cuit on the
display error.
1) LE D not joining well
2) Lens not ins tal l ing well
1) The current of one of the col or gr oup LEDs
is too strong or too weak.
2) LED brigh tness not enough
1) LE D damaged
2) LED damaged or Main PCB
，
，
TE-3X48WW PARLED AQUA
1) Check powe r supply
2) Check powe r connectio n
3) Replace display
4) Check the IC an d all the connec tions
5) Adjust th e L CD contrast
1) Check Display IC inst allat ion and qu ality
1)Rep lace b ut tons
2) Replace Display IC
1) Check all sig nal Cab les
2) Check all sig nal conncetion s
3) Check th e DMX signal r eceive IC
4) Check DMX addres s
1) Replace the heat sensor resista nce.
2) Ch eck the temp era ture pro tection ci rcuit.
1) Check LEDs joining
2) Check len s installing
1 ) Check dri ver current o f the partial col or
LED s on the Driver PCB
2) Check L ED qual ity
3) Res e t to factory defa ult setting.
1) Replace LEDs
2) Replace damaged LED or Main PCB
1) Replace sa ving I C1) Saving IC damaged
12
ADD : 19 Lacist St. Wesbrark, Maine, U.S.A. (04092) sales@te-lighting.com
Phonel : (1) 207-712-3004 http://www.te-lighting.com
5.2 MAINTENANCE
2
1
3
4
5
TE-3X48WW PARLED AQUA
14
13
6
12
11
8
7
No
Fron t cover
1
2
Rubber seal
3
Clear glass
4
Lens completed set
5
LED PCB
6
Heat sink
7
Brac ket
8
Power connection board
9
Displa y PCB
10
Display protection metal plate
11
Safety chain board
Driver PCB
12
POW ER PCB (5V)
13
Power supp ly (24V)l
14
9
ITE M
10
19
ADD : 19 Lacist St. Wesbrark, Maine, U.S.A. (04092) sales@te-lighting.com
Phonel : (1) 207-712-3004 http://www.te-lighting.com
TE-3X48WW PARLED AQUA
Connection Drawing
J1
十
J2
24 V
J3
0V
J3
DMXOUT
J1
J2J2J2
一
J2
DMXIN
0V
S
5V0 V
-B
-B
24V
屏蔽线
0V
5V
HXPEE
HX P EE
T P2- 09 505
TP2- 09 505
J4
0V
POWER
LED
J3
J2
N
J1
L
POW ER
PO WE RO U T
AC 10 0V ~2 50 V
POWERIN
ADD : 19 Lacist St. Wesbrark, Maine, U.S.A. (04092) sales@te-lighting.com
Phonel : (1) 207-712-3004 http://www.te-lighting.com
Loading...