Teli CS5260D, CS5260DP Instruction Manual
Version 1.8
CCD COLOR CAMERA
CS5260D/CS5260DP
INSTRUCTION MANUAL
Tokyo Electronic Industry Co.,Ltd
OWNER’S RECORD
Enter the blank below Product Serial Number, which is found on
bottom/rear chassis of your device. Keep this number for your record.
Serial No.
Contents
GENERAL SAFETY INSTRUCTIONS
1. Product descriptions
2. Features
3. Configuration
4. Rear panel fixture
5. Connection (recommendation)
6. Control of inner selection switches
7. How to set up the camera
8. Specifications
9. How to mount the camera
10. Caution : O peration unde r heavy vibration
11. Attached drawings : Ex-view of CS5260D/DP
12 Maintenance
BEFORE USING THE CAMERA ― GENERAL SAFETY INSTRUCTIONS
This instruction manual contains important information for the operator(user) and/or people around him/her to
avoid personal injuries, or property damages against him/her or people around him/her by using your purchase
correctly. Prior to use, read this operation manual carefully to fully understand its instructions for correct use.
[Definition of markings]
The meaning of each mark used in this instruction manual is given below.
DANGER
This mark warns the user that improper use, indicated with this mark, may cause d eath or sever e
personal injuries against the user or people around him/her.
CAUTION
This mark warns the user that improper use, indicated with thi s mark, may cause person al injuri es
(*1) or material damages (*2) against the user or people around him/her.
Notes
*1 : Personal injuries mean wounds, burns, electric shocks, and others for which the person injured need
not to be hospitalized nor to be cared for the long term.
*2 : Material damages mean any direct or consecutive damages related to property or material loss.
This mark indicates what the user SHOULD NOT DO. The details of things which t he user should not do
are described near this mark.
This mark indicates what the user MUST DO. The details of things which the user must do are described
near this mark.
This mark indicates that the user must be alert against a possible DANGER. The details of the DANGER
which the user must be aware of are described near this mark.
This mark indicates that the user are given a CAUTION against possible hazards. The details of the
CAUTION which the user are given are described near this mark.
●
Handling precautions
DANGER
In the event that any smoke or smell is observed, do NOT try to continue the use of the camera. To do so
in spite of clear signs of malfunction may leads to a fire or an electric shock hazard. In that case, turn the
power switch of the system OFF immediately, and then make sure to remove the camera cable from the
camera connector. After confirming that the camera emits no new smokes after turning the power off,
contact the dealer/distributor from which you purchased the ca mera. Do NEVER attempt to repair the
camera on your own because to do so may cause unexpected hazards.
Do NOT try to use the camera when it is malfunctioning. (Ex. No images on the monitor) In the event of
malfunction, turn the power switch of the system OFF immediately, and then make sure to remove the
camera cable from the camera connector. Co ntact the dealer/distributor from which you purchased the
camera for repair service.
In the event that liquids, small particles, or any other foreign objects get into the camera, do NOT try to
continue the use of the camera. To do so may leads to a fire or an electric shock hazard. In that case, turn
the power switch of the system OFF immediately, and then make sure to remove the camera cable from
the camera connector. Then contact the dealer/distributor from which you purchased the camera.
Do NOT attempt to repair or modify the camera on your own. To do so may leads to a fire or an electric
shock hazard. Contact the dealer/distributor from which you purchased the camera for repair /
modification.
!
!
!
The camera is designed to work only under specified voltage. Do NOT attempt to drive the camera with
the power other than DC9V. Operating the camera under power other than DC12V may leads to a fire or
a electric shock hazard.
Do NOT use the camera under high-humidity-condition, such as, a place near a humidifier. To do so
may leads to a fire or a electric shock hazard.
CAUTION
If the camera is operated in the electromagnetic field, there may be cases where beat noises (vertical,
horizontal, or oblique stripes) may appear in the video output. In that case, take preventive measures on
the electromagnetic-wave generating source so that the camera do not receive the interference by the
electromagnetic-wave. Take extra precautions against electromagnetic-wave-interference if the camera is
used with a servomotor, inverter, or other elec tromagnetic-wave-generating equipment.
Do not give a strong impact/shock on the body of the camera. A strong impact/shock may cause
breakdown or damages. The camera connector may be broken if the camera is used in the system in which
the camera connector is exposed to strong impact/shock. To use the camera and the camera connector
under such har d-use condit ion, use an opti onal camera co nnector mou nting kit to ensur e stable fixi ng of
the connector’s plug onto the camera-body.
When the camera is not in use, put a lens or a lens-cap onto the camera head so that the image pickup
plane of CCD is protected from dust, foreign object, or other flaw-causing object. If the glass plane (image
pickup plane) gets dirty, clean it with a cotton swab. When it needs to be cleaned with a cleaner, be sure
NOT to use any organic solvent other than ethyl alcohol. As a countermeasure against condensation, if and
when the camera is moved from a warm place to a cold place, take appropriate precautions to prevent
condensation from forming on the camera.
Do not pull str ongly no r swin g the ca mera cabl e. T he stress fr om pullin g or s winging may cause d amage s
or breaks in the cable.
To avoid breakdown, do not let video output get short-circuited.
To avoid breakdown, do not expose the camera head to any intensive light (such as sunlight).
When mounting the lens onto the camera head, be sure to check and confirm that the lens is set properly
onto the camera head with no tilt/slant. In addition, confirm that the screw-mounting part is free from
flaws or dusts and other foreign objects. Otherwise, it may become impossible to dismount the lens after
use.
!
!
!
!
!
!
!
!
RESTRICTION FOR USE
In case malfunction of this equipment (e.g. video output cut-off) can be expected to lead to significant
accident, avoid using this equipment for such system build-in use.
CASES FOR INDEMNITY
We shall be exempted from taking responsibility for damages or losses in the following cases.
In case damages or losses are caused by fire, earthquake, or other acts of Gods, the act by third party,
misuse by the user deliberately or erroneously, use under extreme operating conditions.
In case indirect, additional, consequential damages (loss of expected interest, suspension of business
activities) are incurred as results of malfunction or non-function of the equipment, we shall be exempted
from responsibility for such damages.
In case damages or losses are caused by incorrect use which is not in line with the in structions in this
operating manual.
In case damages or losses are caused by malfunction resulting from bad connection with other equipment.
In case damages or losses are caused by repair or modification by the user.
1. Product descriptions
The CS5260D/DP is a one-piece type (*) CCD color camera with a ultra-compact & light-weight body.
[*One-piece type : One integrated body made up of the camera head & the camera control unit]
2. Features
(1) The camera is driven by DC+12V.
(2) The ultra-compact & light-weight body is best suited for observation and other applications.
(3) The built-in automatic white-balancing function allo ws the user to obtain optimal white-balance just with a
push on the button.
3. Configuration
(1) The camera body 1
(2) Accessories
Instruction manual 1
4. Rear panel fixture
The rear-view of a CS5260D/DP
①WB
Just with one push of this button, the camera will adj ust its white-balance. During rthe time that this button is
pressed, the camera performs its white-balancing function. When the button is released, the setting will be fixed.
②VIDEO OUT
This is the output connector for composite video signals. Connect this with the video monitor.
③DC IN
This is the connector for power supply, video output, and adjustment signals. Connect this with the power
supplier or the video monitor.
Compatible connector
HR10A-10P-12S (Manufactured by HIROSE DENKI)
Table 1 : Pin assignment
Pin number Signal name
1 GND
2 +12V
3 GND
4 VIDEO OUT
5 GND
6 SI (Adjustment signal)
7 N.C.
8 C.OUT
9 SO(Adjustment signal)
10 Y.OUT
11 +12V
12 GND
②
①
③
VIDEO
OUT
DCIN
WB
Loading...