Telex Communications IC-6SX Installation & Operation Instructions

Source Assign Panel

Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6

INSTALLATION & OPERATION INSTRUCTIONS

IC-6SX Source Assignment Panel

INSTALLATION

INPUTS OUTPUTS

123456 123456789101112

INPUTS

TELEX COMMUNICATIONS, INC. MADE IN USA

IC-6SX SOURCE ASSIGN PANEL

Input channels.

Link Cable
Wiring

1

2
3
4

5

6

7
8

9

10

11

15 pin Male D-Sub

Use shielded cable for
connections greater
than two feet.

12

13
14
15 15

Note: An optional pre-wired, unshielded cable is available.
Use p/n: 9002-7690-000 when ordering.

1

2
3
4

5

6

7
8
9
10

11
12

13
14

Expansion Connector (15 pin D-Sub Female)
Pinout

noitpircseDsrebmuNniP

oiduA1lennahC9,1

oiduA2lennahC01,2

oiduA3lennahC11,3

Output channels.

Linking Two Units Together

Inputs 1-6

INPUTS

INPUTS

TELEXCOMMUNICATIONS, INC. MADEIN USA

INPUTS

INPUTS

15 pin Male D-Sub

1122334455661122334455667788991010111112

TELEXCOMMUNICATIONS, INC. MADEIN USA

Inputs not used.

Input (3 pin XLR Female) &
Output (3 pin XLR Male)
Connector

Outputs 1-12

OUTPUTS

IC-6SXSOURCE ASSIGN PANEL

OUTPUTS

IC-6SXSOURCE ASSIGN PANEL

Outputs 13-24

noitpircseD)s(rebmuNniP

oiduAdecnalaB3,2

EXPANSION

Links two IC-6SX
units together.

12

EXPANSION

EXPANSION

Expansion Cable

)DNG(nommoClangiS1

oiduA4lennahC21,4

oiduA5lennahC31,5

oiduA6lennahC41,6

)DNG(nommoClangiS51,8,7

OPERATION

®

1 2 3 4 5 6 7 8 9 10 11 12

Set switches to assign
input channels to output
channels.

9350-7690-000 Rev. A, 3/2001

OUTPUTS

IC-6SX

Source Assign Panel

111111111111

Channel 1
Channel 2

222222222222

Channel 3

333333333333

Channel 4

444444444444

Channel 5

555555555555

Channel 6

666666666666

SPECIFICATIONS

Dimensions: H: 1.75” (44.5 mm) W: 19.0” (482 mm) D: 3.85” (98 mm)

Weight: 3.44 lbs (1.55 kg)

Power: N/A

Matrix Type: Passive, Mechanically Switched

Inputs: 6, Balanced, Female XLR type

Outputs: 12, Balanced, Male XLR type

TRADEMARKS

Audiocom® is a registered trademark of Telex Communications. Names
of other products mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of
their respective companies.

WARRANTY INFORMATION

Products are warranted by Telex Communications, Inc. to be free from
defects in materials and workmanship for a period of one year from
the date of sale.

The sole obligation of Telex during the warranty period is to provide,
without charge, parts and labor necessary to remedy covered defects
appearing in products returned prepaid to Telex. This warranty does
not cover any defect, malfunction or failure caused beyond the control
of Telex, including unreasonable or negligent operation, abuse,
accident, failure to follow instructions in the manual, defective or
improper associated equipment, attempts at modification and repair
not authorized by Telex, and shipping damage. Products with their
serial numbers removed or effaced are not covered by this warranty.

To obtain warranty service, follow the procedures entitled “Procedure
for Returns” and “ Shipping to Manufacturer for Repair or Adjustment”.

This warranty is the sole and exclusive express warranty given with
respect to Audiocom products. It is the responsibility of the user to
determine before purchase that this product is suitable for the user’s
intended purpose.

ANY AND ALL IMPLIED WARRANTIES, INCLUDING THE IMPLIED
WARRANTY OF MERCHANTABILITY ARE LIMITED TO THE
DURATION OF THIS EXPRESS LIMITED WARRANTY.

NEITHER TELEX NOR THE DEALER WHO SELLS TELEX PROD­UCTS IS LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAM­AGES OF ANY KIND.

CUSTOMER SUPPORT

Technical questions should be directed to:

RETURN SHIPPING INSTRUCTIONS
Procedure for Returns

If a return is necessary, contact the dealer where this unit was
purchased.

If a return through the dealer is not possible, obtain a RETURN
AUTHORIZATION from:

Customer Service Department
Telex Communications, Inc.
Telephone: [phone] or [phone]
Fax: [phone] or [phone]

DO NOT RETURN ANY EQUIPMENT DIRECTLY TO THE FACTORY
WITHOUT FIRST OBTAINING A RETURN AUTHORIZATION.

Be prepared to provide the company name, address, phone number, a
person to contact regarding the return, purchase order number, the
type and quantity of equipment, a description of the problem and the
serial number(s).

Shipping to Manufacturer for Repair or Adjustment

All shipments of products should be made via United Parcel Service or
the best available shipper prepaid. The equipment should be shipped
in the original packing carton; if that is not available, use any suitable
container that is rigid and of adequate size. If a substitute container is
used, the equipment should be wrapped in paper and surrounded with
at least four inches of excelsior or similar shock-absorbing material. All
returns must include the return authorization number. Units sent for
repair or adjustment DO NOT need a return authorization number

Factory Service department
Telex Communications, Inc.
West 1st Street
Blue Earth, MN 56013 U.S.A.

Upon completion of any repair the equipment will be returned via
United Parcel Service or specified shipper collect.

Customer Service Department
Telex
12000 Portland Avenue South
Burnsville, MN 55337 U.S.A
Telephone: [phone]
Fax: [phone]