Telex ACM1202P User Manual

ACM1202P
2 x 120w Power Amplifier
Operating Manual
SIGNAL
POWER
12
ON
ACM1202P, 2 x 120 Watt Power Amplifier
Product Description
SIGNAL
ON
POWER
12
Front Panel Features
Power Switch
The black rocker switch on the right hand side of the front panel is used to switch the amplifier on and off. The ‘up’ position is on. When the amplifier is connected to an appropriate AC power source and is switched on, the blue power LED will illuminate.
On LED
The blue “On” LED above the power switch will illuminate when the amplifier is connected to mains power and is switched on.
Signal LED
The green “Signal” LED’s located next to the On LED indicate that the ACM1202P is receiving audio signal via its line level inputs. One LED is provided per channel. The signal LED’s are a simple way of trouble-shooting installations especially in multi amplifier projects. At a glance the signal LED’s will indicate that audio is reaching the amplifier .
Rack Mounting
The ACM1202P is supplied with rack ears attached to allow mounting within a standard 19” equipment rack. As is the case with almost all audio products, adequate ventilation and air flow is required. When installing multiple ACM amplifiers within the one rack, it is recommended that at least one rack unit of ventilation space is left between every two amplifiers.
For table or shelf mounting, the rack ears can be removed using a screwdriver. Once the rack ears are removed, please reinstall the screws.
Loading...
+ 4 hidden pages