TeleType Company WORLDNAV 7300 User Manual

Page 1

Hardware User Guide

All rights reserved. No parts of this work may be reproduced in any form or by any means - graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems - without the written permission of the publisher.

Products that are referred to in this document may be either trademarks and/or registered trademarks of the respective owners. The publisher and the author make no claim to these trademarks.

While every precaution has been taken in the preparation of this document, the publisher and the author assume no responsibility for errors or omissions, or for damages resulting from the use of information contained in this document or from the use of programs and source code that may accompany it. In no event shall the publisher and the author be liable for any loss of profit or any other commercial damage caused or alleged to have been caused directly or indirectly by this document.

Page 2

Table of Contents

Contents

Part I

Part II

Getting Started

..........................................................................61 Disclaimer

..........................................................................82 Accessories

..........................................................................93 Specifications

Basic Operation

Part III Main Menu

..........................................................................171 Navigation

2 3

Part IV

..........................................................................18

Bluetooth

..........................................................................20

Media Player

..........................................................................214 Tools

..........................................................................235 FM Radio

..........................................................................246 AV-in

..........................................................................257 System

Troubleshooting

12 16

Index 31

Page 3

Part

Hardware User Guide

1 Getting Started

1.1 Disclaimer

Use the WorldNav at your own risk. To reduce the risk of unsafe operation, please carefully review and understand this user manual.

It is the user's responsibility to use this product prudently. This product is intended to be used only as a navigational aid and must not be used for any

purpose requiring precise measurement of direction, distance, location, or topography. Statistics provided such as trip time are best estimates and may not accurately reflect true conditions.

The Global Positioning System (GPS) is operated by the United States Government, which is solely responsible for its accuracy and maintenance. The system is subject to changes which could affect the accuracy and performance of all GPS equipment.

Page 4

Getting Started

Hardware User Guide

For use in vehicles, it is the sole responsibility of the operator of the TeleType GPS WorldNav to place and secure the GPS unit so that it will not interfere with the vehicle operating controls and safety devices, obstruct the driver's view of driving conditions, or cause damage or personal injury in the event of an accident. Do not mount the TeleType GPS WorldNav in a place where the driver or passengers are likely to impact it in an accident or collision. The mounting hardware supplied by TeleType Co. is not warranted against collision damage or the consequences thereof.

It is the sole responsibility of the driver of the vehicle to operate the vehicle in a safe manner, to maintain full surveillance of all driving conditions at

IN NO EVENT SHALL TELETYPE CO BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT. SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

1.2 Accessories

Before using the GPS, make sure you have all of the accessories listed below. If any of the accessories are damaged or missing, contact TeleType.

1. AC (Wall) Charger

all times, and not become distracted by the GPS system to the exclusion of safe driving practices. It is unsafe to operate the controls of the GPS system while you are driving. Failure by the driver of a vehicle equipped with a TeleType GPS system to pay full attention to operation of the vehicle and road conditions while the vehicle is in motion could result in an accident or collision with property damage and personal injury.

2. DC (Cigarette Lighter) Charger

3. USB Cord

4. Window Mount (Cradle and Suction Cup)

5. User Manuals

Page 5

Getting Started

Hardware User Guide

1.3 Specifications

CPU SiRF Atlas IV AT842 533MHz

NAND Flash 4 GB

DDR 128 MB

LCD

Touch Screen High precision touch screen

USB USB Client 2.0,MINI USB interface

Micro SD

AV Input

Antenna

Precision Position < 10 meters / 32 ft

Audio frequency

7.0 inch TFT screen, resolution: 800 x 480 pixels

Micro SD slot, supports Micro SD

card (maximum 32GB)

Automatic camera detection (sold

separately)

Internal antenna; External antenna

jack

1. 2Watt Built-in Speaker

2. Hi-Fi stereo sound

3. 20mW@32ohm audio output

FM Transmitter

GPS

Battery

Battery charging DC 5V (use together with USB-in)

Power Adaptor 100/220V power adaptor, 5V/1.5A

Car Charger Converts 12V to 5V/1.5A

LED status

Temperature

New Weight 366 grams / 13 oz

Dimensions

Broadcasts GPS audio through

vehicle speakers

Cold boot:<42 seconds

Hot boot:<9 seconds (with

unobstructed view of the sky)

Warm boot:<18 seconds

Built-in high capacity Lithium back

up battery (1200 mAh)

Red light: Charging; Green light:

Fully Charged

Working temperature:

0 °C - 60 °C (32°F - 140°F)

Storing temperature:

-20 °C - 60 °C (-4°F - 140°F)

175 x 109.2 x 14.1 mm

6.88” x 4.29” x .55”

Bluetooth

Built-in Bluetooth with Bluetooth

1.2 standard; allows for hands-free cell phone use

System Platform Microsoft Windows CE 6.0

Navigation software

location

Internal flash memory or Micro SD

card

Page 6

Hardware User Guide

2 Basic Operation

Turning on and off

Turn on or off your GPS by pressing the power button on the top of the device.

Hardware Reset

Occasionally, you may need to perform a hardware reset when your GPS stops responding or appears

Part

to be "frozen" or "locked up." You can perform a reset by pressing the RESET button on the back of the device.

Power Supply

In addition to the built-in lithium battery, you may power the device using the cigarette lighter charger (DC), the wall charger (AC), or the USB charger.

Micro SD Card

This device supports micro SD cards. Be sure the card is securely inserted before use.

Touch Screen/ Stylus Pen

Your device comes equipped with an LCD touch screen, allowing you to move the screen using your

Page 7

Basic Operation

finger or a stylus pen (included). Simply press the desired icon or location on the map to move the screen.

Window Mount

Attach your device to the included window mount and position in a location where it has an unobstructed view of the sky so it receives a strong satellite signal. You may choose to provide some additional cushioning, such as foam on your dashboard, to help absorb shock.

Page 8

Part

Hardware User Guide

3 Main Menu

Main Menu Page 1

III

Main Menu Page 2

Navigation - Provides navigation function

•

• Bluetooth - Allows you to connect you

Bluetooth-enabled cell phone directly to the GPS; you can then dial numbers and receive calls directly from your GPS Media Player - Allows you to access media files

•

such as videos, music and eBooks Tools - Offers a variety of useful tools such as a

•

calculator, notepad and calendar

Page 9

Main Menu

• FM Radio - Allows you to hear your GPS

instructions over your vehicle's speakers

• AV-in - Connect a device such as a rearview

camera to your GPS

• System - Allows you to set your device's system

functions such as volume, power and language

3.1 Navigation

Hardware User Guide

3.2 Bluetooth

This GPS device has the ability to sync with a Bluetooth-enabled cell phone, allowing you to make and receive calls directly from your GPS. Instructions for setting up your Bluetooth feature are below:

1. Begin by enabling the Bluetooth setting on

your cell phone.

2. Click on the <Bluetooth> icon on the GPS Main

Please carefully read the WorldNav Software Guide for navigation instructions.

Menu screen.

3. Click the icon.

Bluetooth Settings Screen

4. Click the icon and set the pin code, then

Page 10

Main Menu

press the icon to confirm the pin.

Hardware User Guide

3.3 Media Player

1. Click the icon to access your media player menu. Here you can select <Music>, <Video>, <Ebook>, <Photo>, or <Flash>.

Pin Entry Screen

5. Click the icon. This will pair your phone to

the GPS. This may take a few minutes. Once the phone recognizes the GPS, it will ask for the pin code, enter 8888 and then confirm. The pair is complete.

6. To make calls from your GPS, press the

icon. When receiving calls, the callers phone number will appear on-screen.

7. Access your Call Log by pressing on the

icon.

2. Select the type of media (music, video, etc) you want to play. For this example, choose Ebook. Browse to your memory card folder. Select the desired file from your selections.

3. You can now view the selected file. You can scroll from page to page (or song/video/photo) by using the arrows on the right side.

Ebook Selection Screen Ebook Reader

8. Display a record of all the devices paired with

you GPS by pressing .

Page 11

3.4 Tools

Main Menu

Hardware User Guide

2. Click on the <Calculator> icon to access the

By clicking on the <Tools> icon, you will have access to features such as a notepad, calculator and calendar.

Tools Menu

1. Click on the <Note> icon to access your

Notepad. Here you can manually type in notes. This is useful as a driver log, address book, or reminder list.

calculator. Here you can switch between a standard calculator and a scientific calculator.

Calculator Screen

3. Click on the <Calendar> icon to access your

calendar.

Notepad Screen

Calendar Screen

Page 12

Main Menu

Hardware User Guide

3.5 FM Radio

The <FM> button enables you to link your device to an unused radio frequency channel, thereby allowing you to hear your route instructions over the radio speakers. Select a frequency from the FM Page and then set your radio dial to that frequency. Be sure you have selected <FM Switch>.

FM Frequency Selection Screen

3.6 AV-in

<AV> allows you to access audio and/or video

obtained through the AV-input port. Sources such as rearview cameras (sold separately) or other media players can be accessed through this function. Any device that has an AV-out function can be supported. For questions regarding rearview cameras or to purchase, contact TeleType GPS.

AV Input Screen

Page 13

Main Menu

Hardware User Guide

3.7 System

The <System> icon allows you to set several different system functions. Here you can adjust the backlight strength, change the language, set the time and much more.

System Menu

Volume: Adjust the speaker volume* and enable/

disable "screen clicks".

Note: For maximum range of sound adjustment, keep the System volume setting at 100% and use the software to adjust the volume. (If you lower the sound in the software, the System will have less control of the volume.)

Date/Time: This function is used to adjust the internal calendar. Refer to the WorldNav Software Guide for instructions on how to set the time for navigation.

Language

: Set the default language. Please note

that the WorldNav software will override these settings for navigation. Refer to the WorldNav software user guide for details.

System Info: Displays a detailed summary of system information:

1. Calibration - click this icon to adjust the screen calibration. Move the [+] by pressing directly in the center of the icon. Repeat this process as it moves to the left, right, upper and lower parts of the screen. Click <OK> when complete.

Power: Displays battery power remaining and allows you to set the time for automatic power-off.

Backlight: Adjust screen brightness and set automatic screen power to "Off".

2. GPS Reset - resets the satellite receiver.

3. Factory Reset - Automatically returns to default settings. WARNING: Will erase all data!

Page 14

Hardware User Guide

4 Troubleshooting

Problem Reason Solution

Part

GPS will not

power on

Screen is too

dark

Touch screen

function is

abnormal

No Sound

Lack of power

Power is off Press the Power button

The backlight is

not bright enough

The backlight has

been turned off

Touch screen

calibration is off

The volume level

is at its lowest

setting

Poor connection

between

earphones and

device

Plug in the device to AC

or DC power

Adjust the backlight to a

brighter setting

Touch the screen and

screen will turn on

Use System Tools to

recalibrate the screen

Increase the volume using the WorldNav

software or the

hardware system

settings

Check the connection to

the earphones

Page 15

Troubleshooting

Cannot

communicate

with computer

No GPS signal

Unable to use

navigation

function

The USB cable is

not connected

well

Poor reception

area such as

inside a building,

an urban area or a

mountainous

region;

interference from

another device in

the vehicle

Contact TeleType GPS Support Staff

Connect USB cable;

check ActiveSync

Mount the GPS on the

windshield with a clear

view of the sky; try

obtaining a signal

outside your vehicle;

note that some electronics and

windshield treatments

interfere with GPS signal

settings

strength

Page 16

Index

- A -

Accessories 8

AV Settings 24 AV-in 24

- B -

Backlight 25 Bluetooth 18

- C -

Calculator 21 Calender 21

Calibration 25 Cell Phone 18

- D -

Date 25

- M -

Movies 20

Music 20

- N -

Navigation 17

Notepad 21

- P -

Photo 20 Power 25 Power Cord 8

- R -

Radio 23 Rearview Camera 24

- S -

Set 23 Specs 9

- E -

Ebook 20

- F -

Flash Movie 20 FM 23 Frequency 23

System Info 25

- T -

Technichal Specfications 9

Time 25 Tools 21

- V -

Volume 25

Printed in China