Teletronics Wi-Fi VoIP Phone User Manual

Warranty Policy

Limited Warranty

All Teletronics’ products warranted to the original purchaser to be free from defects in materials and workmanship
under normal installation, use, and service for a period of one (1) year from the date of purchase. Under this
warranty, Teletronics International, Inc. shall repair or replace (at its option), during the warranty period, any part
that proves to be defective in material of workmanship under normal installation, use and service, provided the
product is returned to Teletronics International, Inc., or to one of its distributors with transportation charges
prepaid. Returned products must include a copy of the purchase receipt. In the absence of a purchase receipt,
the warranty period shall be one (1) year from the date of manufacture.

This warranty shall be voided if the product is damaged as a result of defacement, misuse, abuse, neglect,
accident, destruction or alteration of the serial number, improper electrical voltages or currents, repair, alteration
or maintenance by any person or party other than a Teletronics International, Inc. employee or authorized service
facility, or any use in violation of instructions furnished by Teletronics International, Inc.

This warranty is also rendered invalid if this product is removed from the country in which it was purchased, if it
is used in a country in which it is not registered for use, or if it is used in a country for which it was not designed.
Due to variations in communications laws, this product may be illegal for use in some countries. Teletronics
International, Inc. assumes no responsibility for damages or penalties incurred resulting from the use of this
product in a manner or location other than that for which it is intended.

Quick Product Guide

Technical Specs

Physical Characteristics

Dimensions

Weight

Display

Buttons

Notification

Ports

H: 5.0" x W: 1.8" x D: 0.8"

Around 110 g

LCD 112x64 Graphic Mode, with Backlight

0~9, #, *, 9 functions, 2 volume keys

Ringer/Vibration

Ear-Phone Jack, mini-USB port

Wi-Fi VoIP Phone

Item# 21-109

IN NO EVENT SHALL TELETRONICS INTERNATIONAL, INC. BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED,
WHATSOEVER.

Some states do not allow the exclusion or limitation of special, incidental or consequential damages, so
the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights, and
you may also have other rights that vary from state to state.

RMA Policy

Product Return Policy

It is important to us that all Teletronics’ products are bought with full confidence. If you are not 100% satisfied
with any product purchased from Teletronics you may receive a prompt replacement or refund, subject to the
terms and conditions outlined below.

IMPORTANT: Before returning any item for credit or under warranty repair, you must obtain a Return Merchandise
Authorization (RMA) number by filling out the RMA form. Products will not be accepted without an RMA number.
All products being shipped to Teletronics for repair/refund/exchange must be freight prepaid (customer pays for
shipping). For all under warranty repair/replacement, Teletronics standard warranty applies.

30-Day full refund or credit policy:
I. Product was purchased from Teletronics no more than 30 day prior to the return request.
II. All shipping charges associated with returned items are non-refundable.
III. Products are returned in their original condition along with any associated packaging, accessories,
mounting hardware and manuals. Any discrepancy could result in a delay or partial forfeiture of your credit.

Unfortunately Teletronics cannot issue credits for:
I. Products not purchased from Teletronics directly. If you purchased from a reseller or distributor you must
contact them directly for return instructions.
II. Damaged items as a result of misuse, neglect, or improper environmental conditions.
III. Products purchased direct from Teletronics more than 30 days prior to a product return request.

Network Characteristics

Protocol

Security

User Environment

Accessories AC Adapter with mini-USB cable

Regulatory

EMI/RFI FCC Class B, CE

Performance Characteristics

Call Control Protocol

Codec

Battery

Battery Life

Wireless Access Protocol

Frequency Range

Number of Channels

Data Rate

Release Output Power

Range

TCP/IP; DHCP; IEEE 802.11b protocol

Wired Equivalent Privacy (WEP) 64 & 128 bit

SIP (RFC2543/RFC3261)

G.711/G.729a

3.6V, 1350mAhr Lithium

3.2hr talk time, 21-23 hr standby

CSMA/CA

2.4-2.497 GHz

Up to 14 Channels

802.11b Direct Sequence Rate scaling
at 1,2,5.5, and 11 Mbps

RF output 30mW peak

1,000+ft./300+m outdoors and up to
295 ft./75.5m indoors

Features

Peer-to-Peer Dialing

Speed Dialing

Pre-Dialing

Call Conference

Authentication: MD5

DHCP: Gateway

Dependent

RF & Battery Level

*Red colored items are options by server

Selectable Ring

Melodies/Tones

Call Hold

Call Waiting

Call Transfer

Call Forwarding

Call Mute

Redial

Package List

1. Wi-Fi Voip Phone

2. Standard Battery

3. AC Adapter Charger

4. Headset

5. Quick Product Guide

To return any product under 1 year warranty for repair/replacement, follow the RMA procedure.

Sample Application Diagram Initial Set-Up Guide (Cont.)

4. Configuring Network Setting

Press the left Soft key for Menu. Scroll down to 4. Network Setting and press OK.

DSL/ CABLE MODEM

Select the network type: Fixed IP, DHCP, or PPPoE, and enter the configuration
address/setting.

HOTSPOT

EZLoop WI-FI

VoIP PHONE

TRAVELER

INTERNET

DSL/ CABLE MODEM

OFFICE A

WIRELESS

OFFICE B

EZLoop WI-FI

VoIP PHONE

PC

EZLoop WI-FI

VoIP PHONE

NOTEBOOK PDA

Initial Set-Up Guide

1. Installing Battery and Charging the phone

Press the Silver button on the back of the phone to remove the cover. Insert the
battery. Slide the cover back on. Plug in the AC adapter to phone and to power
outlet. Charge the battery for 2 hours before start using the WiFi Phone

5. Configuring SIP Setting

Press the left Soft key for Menu. Scroll down to 5. SIP Settings and press OK.
Scroll to Registrar and press OK. Enter Registrar IP (IP Address or domain name),
Port, & Expiry Time

6. Configuring from Web Browser

PC

Default IP Address: 192.168.0.6
User Account ID: user
Password: 1111
Administrator Account ID: voipadmin
Password: admin

Please Note:

Use web browser to access the WiFi Phone through GUI interface for further
settings configuration. Make sure the phone is connected to a wireless network,
and use the current assigned IP address.

2. Press and hold the “End / Power Key” red button for 2 seconds to turn
on / off the phone

3. Configuring Wireless Network

Press the left Soft key for Menu. Scroll down to 7. Wireless and press OK. Scroll to
Site Survey and press OK. Select the name of the wireless you want to connect and
press OK.

PLEASE VISIT OUR WEBSITE AT WWW.TELETRONICS.COM FOR MORE INFORMATION