TELELFUNKEN TK2529ST Service Manual
TELELFUNKEN
SERVICE MANUAL
1. Caution……………………………………………………………2
2. Specification………………………………………………………6
3. BOM List ……………………… ………………………………9
4. Alignment Procedure………………………………………….…45
5. Block Diagram……………………………………………………49
6. Schematic Diagram………………………………………………50
7. PCB Layout………….……………………………………………51
8. Explode View Diagram……………………………………………52
This manual is the latest at the time of printing, and does not
include the modification which ma
y
be made after the printing, b
y
the constant improvement of product.
TK2529ST
WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF
ELECTRICAL SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lighting flash with arrowhead symbol, with an equilateral triangle is intended to
alert the user to the presence of uninsulated voltage within the products
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
the person.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION:
Use of controls, adjustments or procedures other than those specified herein may result in
hazardous radiation exposure.
CAUTION
RISK RISK OF OF ELECTRIELECTRICC
SHOCK SHOCK DO DO NOT NOT OPEN.OPEN.
2
dangerous
3
FOR YOUR PERSONAL SAFETY
1. When the power cord or plug is damaged or frayed, unplug this television set from the wall outlet and refer servicing to
qualified service personnel.
2. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
3. Do not allow anything to rest on or roll over the power cord, and do not place the TV where power cord is subject to
traffic or abuse. This may result in a shock or fire hazard.
4. Do not attempt to service this television set yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
5. Never push objects of any kind into this television set through cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the television set.
6. If the television set has been dropped or the cabinet has been damaged, unplug this television set from the wall outlet
and refer servicing to qualified service personnel.
7. If liquid has been spilled into the television set, unplug this television set from the wall outlet and refer servicing to
qualified service personnel.
8. Do not subject your television set to impact of any kind. Be particularly careful not to damage the picture tube surface.
9. Unplug this television set from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
10.1. Do not place this television set on an unstable cart, stand, or table. The television set may fall, causing serious injury
to a child or an adult, and serious damage to the appliance. Use only with a car t or stand recommended by the
manufacturer, or sold with the television set. Wall or shelf mounting should follow the manufacturer s instructions, and
should use a mounting kit approved by the manufacturer.
10.2. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to overturn.
CAUTION:
Read all of these instructions. Save these instructions for later use . Follow all Warnings and
Instructions marked on the audio equipment.
1. Read Instructions- All the safety and operating instructions should be read before the product is operated.
2. Retain Instructions- The safety and operating instructions should be retained for future reference.
3. Heed Warnings- All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions- All operating and use instructions should be followed.
IMPORTANT SAFETY INSTRUCTIONS
4
PROTECTION AND LOCATION OF YOUR SET
11. Do not use this television set near water ... for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, etc.
Never expose the set to rain or water. If the set has been exposed to rain or water, unplug the set from the wall
outlet and refer servicing to qualified service personnel.
12. Choose a place where light (artificial or sunlight) does not shine directly on the screen.
13. Avoid dusty places, since piling up of dust inside TV chassis may cause failure of the set when high humidity persists.
14. The set has slots, or openings in the cabinet for ventilation purposes, to provide reliable operation of the receiver, to
protect it from overheating. These openings must not be blocked or covered.
Never cover the slots or openings with cloth or other material.
Never block the bottom ventilation slots of the set by placing it on a bed, sofa, rug, etc.
Never place the set near or over a radiator or heat register.
Never place the set in enclosure, unless proper ventilation is provided.
PROTECTION AND LOCATION OF YOUR SET
15.1. If an outside antenna is connected to the television set, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built up static charges, Section 810 of the National Electrical Code, NFPA No.
70-1975, provides information with respect to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection
to grounding electrode, and requirements for the grounding electrode.
15.2. Note to CATV system installer : (Only for the television set with CATV reception)
This reminder is provided to call the CATV system attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric lights or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
17. For added protection for this television set during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage due to lightning
and power-line surges.
ANTENNA
LEAD- IN WIRE
ANTENNA DISCHARGE
UNIT (NEC SECTION
810-20)
GROUNDING
CONDUCTORS
(NEC SECTION810-21)
GROUND CLAMPS
POWER SER VICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
ELECTRIC SERVICE
EQUIPMENT
GROUND CLAMP
NEC-NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE INSTRUCTIONS
a built-in
installer s
OPERATION OF YOUR SET
18.
This television set should be operated only from the type of power source indicated on the marking label. If you are not
sure of the type of power supply at your home, consult your television dealer or local power company. For television
sets designed to operate from battery power, refer to the operating instructions.
19. If the television set does not operate normally by following the operating instructions, unplug this television set from the
wall outlet and refer servicing to qualified service personnel. Adjust only those controls that are covered in the operating
instructions as improper adjustment of other controls may result in damage and will often require extensive work by a
qualified technician to restore the television set to normal operation.
20. When going on a holiday : If your television set is to remain unused for a period of time, for instance, when you go on
a holiday, turn the television set and unplug the television set from the wall outlet.
IF THE SET DOES NOT OPERATE PROPERLY
21. If you are unable to restore normal operation by following the detailed procedure in your operating instructions,
do not attempt any further adjustment. Unplug the set and call your dealer or service technician.
22. Whenever the television set is damaged or fails, or a distinct change in performance indicates a need for
service, unplug the set and have it checked by a professional service technician.
23. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being
turned on or off. If the snapping or popping is continuous or frequent, unplug the set and consult your
dealer or service technician.
FOR SERVICE AND MODIFICATION
24. Do not use attachments not recommended by the television set manufacturer as they may cause hazards.
25. When replacement parts are required, be sure the service technician has used replacement parts specified
by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
26. Upon completion of any ser vice or repairs to the television set, ask the service technician to perform
routine safety checks to determine that the television is in safe operating condition.
5
off
PFS2 FORMAT-1 Report
Date: 2003-11-26 15:30
ProductView......:
Re
p
ort by............:
Specs / Products
SRF NO./ODF NO.
ON43044004R2
MasterData
Customer Id
BGH S.A.
Version
0.1
Status
WG Archived
Brand
TELEFUNKEN
EAN
\
UPC
\
Rece
p
tion
+Tunin
g
- presets/channels
181
+Tunin
g
- technolo
gy
PLL
+Tunin
g
- Indication
---
+Fre
q
Bands
Full-Cable
+Channels
VHF:2-13, UHF:14-69, CATV: 1-13,
A-W.W+1---W+84,A-5---A-1,5A
+IF Fre
q
PICTURE 45.75MHz
+TV S
y
stems Off Ai
r
PAL M/N 'NTSC M (3.58 - 4.433)
+Add S
y
stems Ext In
---
+TV S
y
stems Multi
PAL NTSC
+Sound S
y
stems
AV STEREO, AMERICAN STEREO
Picture - Processin
g
+Scan
Standard
+Scan Modes
4:3
+Wide Screen Switchin
g
+Combfilter
X
+Picture Control
4 Picture Modes, Brightness, Color,
Contrast, Tint, Sharpness Cont Var
+Pict Enhancement
Black Stretch
+Pict Noise Reduction
---
Picture - Dis
play
+Display T
ype
DV - CRT - FSQ
+Screen Format
4:3
+Size
(
Visual)" - size/vis. cm
25"
+Deflection S
y
stem (CRT onl
y)
+Tube Technology (CRT onl
y)
Black Matrix, Iron
+CRT Defl
+CRT Gun
Stand Gun
+CRT Ma
g
n field
Normal
+Resolution
+Coatin
g (
only for D.V. sets
)
+White Point
Sound
+Leaflet Power
+RMS Power Intern
+RMS Power Extern
+Surround Sound
+Sound Features
BTSC
+Sound Control
Volume
Sound - S
p
eakers
+S
p
eaker configuration
2 speakers
+S
p
eakers used
Normal Range
+S
p
eaker Size
User Interface
+Interface Name
25276
+Voice Control
+Menu
Cursor Control
+Menu Colours
+Menu Lan
guag
es
Spanish, English, Portuguese
+S
p
ecial Features
+O
p
erational Features
COMB-F
+PP Features
+Tuning/Install Features
Auto Store, Factory Mode, Language
Selection, Service Mode
+Clock/Timer Functions
Sleep timer/Clock
+Local Controls Front
+Local Controls To
p
+Indicators - screen
+Indicators - front
Product:@
TK2529ST
2003-11-27 11:40 25276 PFS 1 of 3
Date: 2003-11-26 15:30
ProductView......:
Re
p
ort by............:
Specs / Products
Product:@
TK2529ST
+Numb of Loc Cont (incl Mains
)
7
+Number of Ind.
(
incl Mains
)
+Local Controls (Old)
Channel +-, Tact Switch, Vol +-,
TV/AV, MENU
Remote Control
+Remote Control - sco
p
e
TV
+Remote Control - t
yp
e
Standard
+Remote Control - t
ypenr
E
+Remote Control - features
Connectors Rea
r
+Scart RGB+Y/C+CVBS
+Scart RGB+CVBS
+Scart CVBS+Y/C
+Com
p
onent In (Y/U/V) Cinch
X
+In Y/C+Cinch
(
CVBS+St
)
+In Y/C+Cinch(CVBS+Mo
)
+In Y/C+Cinch(St
)
+In BNC (CVBS
)
+In Cinch(CVBS+St
)
X
+In Cinch
(
CVBS+Mo
)
---
+Out Cinch
(
CVBS+St
)
X
+Out Cinch
(
CVBS+Mo
)
+Out Cinch Audio Stereo
+Out Cinch Audio Mono
+Out Cinch Dolb
y
Surround
+Di
g
Audio Out
+Louds
p
eakers
+Control Busses
+Feature Slot
+ITV Smart Port
+Terr. Antenna in
75 Ohms (F type)
Guide + IR Blaster Jack
Connectors Fron
t
+In Cinch (CVBS + St
)
+In Cinch (CVBS+Mo
)
+Headphone Out
Connectors Side
+In Y/C + Cinch
(
CVBS+St + Mo
)
x
+In Y/C + Cinch Stereo
+In Cinch
(
CVBS + St
)
+IN Cinch (CVBS + Mo +St
)
+Headphone Out
Connectors To
p
Connectors Mechanical
St
y
lin
g
+Cabinet Name
25276
+Confi
g
uration
Symm
+Gra
p
hics/Logo's
TELEFUNKEN
+Cabinet Colour and Finish
+Mechanics
+S
p
eaker Visibilit
y
Standard
General
+Se
g
ment
Standard 4:3
+Chassis
M34
+Software Deliver
y
Mode
+Software Version
+Mains Volta
g
e
110-240V
+Mains Fre
q
uenc
y
50/60Hz
+T
yp
e Mains Cord
Argentina
Power Consum
p
tion (P)TV in On
Power Consum
p
tion SB in Watts
Less than 6W
Power Consum
p
tion Semi SB in W
+Power in "ON" for
+Power in Standb
y
for
+Power in "OFF" for
Wei
g
ht (P)TV (incl. Packagin
g)
Weight (P)TV (excl. Package
)
Weight AVUnit excl Packagin
g
+INDICATION on BACKCOVE
R
+Channel
2003-11-27 11:40 25276 PFS 2 of 3
Date: 2003-11-26 15:30
ProductView......:
Re
p
ort by............:
Specs / Products
Product:@
TK2529ST
Final Equipment
+Packa
ging
- methods
+Documents and manuals
+Lan
guag
es DFU
+Cables Su
pp
lied
+Antenna Su
pp
lied
+Stand Su
pp
lied
+Aux E
quip
m Supplied
Batteries for RC (2 x AA)
Packa
ging
- width cm
Packa
ging
- height cm
Packa
ging
- depth cm
Miscellaneous
+EAN Indication
+A
pp
robation
CB
+Tests
+Local Inte
g
ration
V
arious Perf. Param.
+Service Call-Rate
PIP/POP
+T
ype
No PIP/POP
+Features
n/a
Di
g
ital Reception
+Transmission
Built-in Data S
y
stem
+Text Standard
+
(
Tele)text Features
+Nbr bck
g
rnd page / Mem Size
+Text Technolo
gy
+Digital Data handlin
g
+Program Guide
Built-in Clock/Timer
+T
ype
+Features
Built-in Radio
+T
ype
Built-in PC displa
y
+PC Synch
+PC Control
Built-in DVD drive
+T
yp
e of Medium
+T
yp
e of Dec
k
Phased Out Items
+Tuner/Frontend
X
+Sensitivit
y
+CRT EHT
+Li
g
htning Protection
NO
+Accoun
t
+XX(Radio Antenna in
)
+Non Volatile Memor
y
+In Y/C + Cinch(CVBS+Mo
)
Version of deck
2003-11-27 11:40 25276 PFS 3 of 3
Item No. Description Quantity Req. Designator Remarks
08-02513M-AVY ASS'Y- AV BD 1
11-2SK362-YBX FET 2SK362-Y (N-CHANNEL) 1 Q962
11-2SK362-YBX FET 2SK362-Y (N-CHANNEL) 1 Q963
11-SK2541-0BX FET 2SK2541(N-CHANNEL) 1 Q961
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R952
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R953
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R968
18-CB0153-JNX RES. C.F. 15k OHM 1/6W +/-5% 1 R967
18-CB0222-JNX RES. C.F. 2.2k OHM 1/6W +/-5% 1 R966
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R959
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R954
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R955
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R956
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R957
18-CB0562-JNX RES. C.F. 5.6k OHM 1/6W +/-5% 1 R964
18-CB0820-JNX RES. C.F. 82 OHM 1/6W +/-5% 1 R951
18-CB0820-JNX RES. C.F. 82 OHM 1/6W +/-5% 1 R962
25-HCB101-M1X CAP. ELEC 100 UF 16V +/-20% 1 C963
25-HCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C951
25-HCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C954
25-HCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C955
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C964
26-EBP102-KBX CAP. CER 1000 PF 50V +/-10% B 1 C962
34-R220J2-0EX COIL PL - 22 UH +/-5% 1 L961
40-2906SM-SIC P.C.B. SIDE AV BD 1
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J951
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 JM13B
46-39136H-07X 7P 2468#24/1185#26 550 TJC3-7Y/SCN-7Y 1 P902 FOR M. BD P901
47-RCA002-XX0 RCA SOCKET AV-8.4-6 (WHITE) 1 P941L
47-RCA003-XX0 RCA SOCKET AV-8.4-6 (YELLOW) 1 P941V
47-RCA017-XX0 RCA JACK RED (RCA-101P) (THREE FEET) 1 P941R
9
Item No. Description Quantity Req. Designator Remarks
47-SVI001-XX0 SOCKET 1 P951
08-02516M-YUY ASS'Y - YUV PARTS 1
11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q933
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q932
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q934
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R939
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R940
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R944
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R937
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R938
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R942
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R943
18-CB0820-JNX RES. C.F. 82 OHM 1/6W +/-5% 1 R935
18-CB0820-JNX RES. C.F. 82 OHM 1/6W +/-5% 1 R936
27-MBC104-J0X CAP. M.P.E 0.1 UF 63V +/-5% 1 C230
27-MBC104-J0X CAP. M.P.E 0.1 UF 63V +/-5% 1 C231
41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 FOR P9-P11 OF IC261
41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 FOR P1-P3 OF IC261
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J903
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J904
41-WJ0200-B00 WIRE BARE JUMPER 20MM 1 J254
41-WJ0200-B00 WIRE BARE JUMPER 20MM 1 J256
47-RCA089-XX0 RCA SOCKET AV-3.2-3LK-N2 1 P931
18-CB0222-JNX RES. C.F. 2.2k OHM 1/6W +/-5% 1 R941
25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C932
25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C933
08-025276-FRY 1
74-100100-8CD POLYBAG (100CMX100CM) 1 FOR F. CAB.
74-120120-8CD POLYBAG (120CMX120CM) 1 FOR R. CAB.
74-344740-50C EPE BOARD ((750MMX580MMX5MM) 0.25 FOR F. CAB.
76-001497-0AF CARTON BOX LWH 640X460X360MM 0.0216 FOR OTHER
10
Item No. Description Quantity Req. Designator Remarks
76-00C276-0AF CARTON BOX 0.25 FOR F. CAB.
76-00C276-0AR CARTON BOX 0.333 FOR R. CAB.
76-346740-01A CARTON SHEET LWH 440X620X3MM 0.065 FOR OTHER
77-100100-6WC BUBBLE BAG (100cmX100cm) 1 FOR F. CAB.
74-344740-50C EPE BOARD ((750MMX580MMX5MM) 0.667 FOR R.CAB
08-02575M-CRY ASS'Y - CRT BD 1
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D501
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D502
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 L501
11-A562TM-0BX TRANSISTOR 2SA562TM-0 1 Q507
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q502
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q504
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q506
11-SC4544-0AX TRANSISTOR 2SC4544 1 Q501
11-SC4544-0AX TRANSISTOR 2SC4544 1 Q503
11-SC4544-0AX TRANSISTOR 2SC4544 1 Q505
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R515
18-CB0272-JNX RES. C.F. 2.7k OHM 1/6W +/-5% 1 R514
18-CB0561-JNX RES. C.F. 560 OHM 1/6W +/-5% 1 R501
18-CB0561-JNX RES. C.F. 560 OHM 1/6W +/-5% 1 R505
18-CB0561-JNX RES. C.F. 560 OHM 1/6W +/-5% 1 R510
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R506
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R509
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R511
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R522
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R502
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R503
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R508
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R513
18-FE0272-JNX RES. M.O. 2.7K OHM 1/2W +/-5% 1 R519
18-FE0272-JNX RES. M.O. 2.7K OHM 1/2W +/-5% 1 R520
11
Item No. Description Quantity Req. Designator Remarks
18-FE0272-JNX RES. M.O. 2.7K OHM 1/2W +/-5% 1 R521
18-FG0183-JHX RES. M.O. 18K OHM 2W +/-5% 1 R516
18-FG0183-JHX RES. M.O. 18K OHM 2W +/-5% 1 R517
18-FG0183-JHX RES. M.O. 18K OHM 2W +/-5% 1 R518
25-BLA100-M1X CAP. ELEC 10 UF 250V +/-20% 1 C504
26-AMK102-KRX CAP. CER 1000 pF 2KV +/-10% R 1 C505
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C508
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C509
26-EBP391-JCX CAP. CER. 390PF 50V +/-5% CH 1 C501
26-EBP391-JCX CAP. CER. 390PF 50V +/-5% CH 1 C502
26-EBP471-JCX CAP. CER 470PF 50V +/-5% CH 1 C503
34-R220K2-1BX COIL CHOKE 22 UH +/-10% 1 L502
35-237250-00X FERR. BEAD HF70 4.5X5.0 2 FOR C508(L505 & L506)
40-2980UA-CRA P.C.B. CRT BD 1
41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 L504
41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 L503
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 R504
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 R507
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 R512
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J503
46-10967W-01X PIN BASE *1 TJC1-1A 1 P501 F FOR CRT GROUNDING HOUS.
46-30615H-04X HS 4P24 460 F/W TJC3-4Y/SCN-4 1 P502 F FOR M.BD P421
46-37030H-05X HS 5P 2468#24 450 TJC3-5Y/SCN 1 P503 F FOR M.BD P201
47-265540-0U7 SOCKET CRT GZS10-2-4 (C.B.) 1 S501
25-BCB471-M1X CAP. ELEC 470 UF 16V +/-20% 1 C506
08-02988M-CFY ASS'Y - COMB FILTER BD 1
11-SK2541-0BX FET 2SK2541(N-CHANNEL) 1 Q1111
13-0TDA91-81P IC TDA9181 (COMB FILTER) 1 IC1101
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R1112
18-CB0472-JNX RES. C.F. 4.7k OHM 1/6W +/-5% 1 R1111
26-EBP102-KBX CAP. CER 1000 PF 50V +/-10% B 1 C1123
12
Item No. Description Quantity Req. Designator Remarks
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C1114
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C1116
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C1117
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C1118
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C1119
26-EBP150-JCX CAP. CER 15PF 50V +/-5% CH 1 C1120
26-EBP150-JCX CAP. CER 15PF 50V +/-5% CH 1 C1122
26-EBP222-KBX CAP. CER 2200PF 50V +/-10% B 1 C1111
27-MBC104-J0X CAP. M.P.E 0.1 UF 63V +/-5% 1 C1112
34-R100J2-0EX COIL PL - 10 UH +/-5% 1 L1111
34-R100J2-0EX COIL PL - 10 UH +/-5% 1 L1112
40-2980UA-CBB P.C.B. COMB F. 1
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J1112
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J1116
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 R1114
41-WJ0070-B00 WIRE BARE JUMPER 7MM 1 J1113
41-WJ0080-B00 WIRE BARE JUMPER 8 MM 1 J1111
46-21550W-12X HEADER *12 TS12B-SQ-1 L=10MM 1 P1101
25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C1113
25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C1115
25-BFB479-M1X CAP. ELEC 4.7 UF 50V +/-20% 1 C1121
08-02988M-MSY ASS'Y - MSP PARTS 1
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q1001
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q1002
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q1003
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q1004
18-CB0101-JNX RES. C.F. 100 OHM 1/6W +/-5% 1 R1001
18-CB0101-JNX RES. C.F. 100 OHM 1/6W +/-5% 1 R1002
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R1021
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R1004
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R1022
13
Item No. Description Quantity Req. Designator Remarks
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R1023
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R1024
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R1025
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R1003
18-CB0152-JNX RES. C.F. 1.5k OHM 1/6W +/-5% 1 R1007
18-CB0332-JNX RES. C.F. 3.3k OHM 1/6W +/-5% 1 R1005
18-CB0470-JNX RES. C.F. 47 OHM 1/6W +/-5% 1 R1006
26-ABC152-KBX CAP. CER 1500 PF 50V +/-10% B 1 C1012
26-ABC339-CZX CAP. CER 3.3 PF 50V +/-0.25 SL 1 C1001
26-ABC339-CZX CAP. CER 3.3 PF 50V +/-0.25 SL 1 C1002
26-EBP102-KBX CAP. CER 1000 PF 50V +/-10% B 1 C1021
26-EBP102-KBX CAP. CER 1000 PF 50V +/-10% B 1 C1022
26-EBP102-KBX CAP. CER 1000 PF 50V +/-10% B 1 C1023
26-EBP102-KBX CAP. CER 1000 PF 50V +/-10% B 1 C1024
26-EBP471-JCX CAP. CER 470PF 50V +/-5% CH 1 C1025
26-EBP560-JZX CAP. CER 56PF 50V +/-5% SL TUBE 1 C1003
26-EBP560-JZX CAP. CER 56PF 50V +/-5% SL TUBE 1 C1004
26-EBP560-JZX CAP. CER 56PF 50V +/-5% SL TUBE 1 C1005
34-R220J2-0EX COIL PL - 22 UH +/-5% 1 L1001
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J1002
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J1003
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J1005
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J1006
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J1007
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J1009
41-WJ0080-B00 WIRE BARE JUMPER 8 MM 1 J1004
41-WJ0090-B00 WIRE BARE JUMPER 9MM 1 J1001
45-OSC18M-4Y0 CRYSTAL 18.432M 1 X1001
25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C1013
25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C1014
25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C1015
14
Item No. Description Quantity Req. Designator Remarks
25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C1016
25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C1008
25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C1019
25-BFB339-M1X CAP. ELEC 3.3 UF 50V +/-20% 1 C1010
13-P3440G-B8P IC MSP3440G B8(52-PIN PSDIP) 1 IC1001
41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 J1021
41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 J1022
26-EBP390-JCX CAP. CER 39PF 50V +/-5% CH 1 C1034
26-EBP390-JCX CAP. CER 39PF 50V +/-5% CH 1 C1035
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C1006
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C1009
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C1011
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C1018
26-EBP104-ZFX CAP. CER 0.1UF 50V +80%/-20% 1 C1017
26-EBP104-ZFX CAP. CER 0.1UF 50V +80%/-20% 1 C1030
26-EBP104-ZFX CAP. CER 0.1UF 50V +80%/-20% 1 C1031
26-EBP104-ZFX CAP. CER 0.1UF 50V +80%/-20% 1 C1032
26-EBP104-ZFX CAP. CER 0.1UF 50V +80%/-20% 1 C1033
08-0C276M-KEN 1
18-CB0152-JNX RES. C.F. 1.5k OHM 1/6W +/-5% 1 R023A
18-CB0182-JNX RES. C.F. 1.8K OHM 1/6W +/-5% 1 R024A
18-CB0272-JNX RES. C.F. 2.7k OHM 1/6W +/-5% 1 R025A
18-CB0432-JNX RES. C.F. 4.3K OHM 1/6W +/-5% 1 R026A
18-CB0622-JNX RES. C.F. 6.2k OHM 1/6W +/-5% 1 R027A
40-29166T-KEA P.C.B. KEY BD 1
46-39259H-02X HS 2P2468#24 1000 TJC3-2Y/JC25-26 1 P004A FOR M. BD P003A
48-TAC001-XX0 TACT SWITCH 1 S001A
48-TAC001-XX0 TACT SWITCH 1 S002A
48-TAC001-XX0 TACT SWITCH 1 S003A
48-TAC001-XX0 TACT SWITCH 1 S004A
48-TAC001-XX0 TACT SWITCH 1 S005A
15
Item No. Description Quantity Req. Designator Remarks
48-TAC001-XX0 TACT SWITCH 1 S006A
08-0C276M-SW1 1
11-IRR001-3X0 IR RECEIVER MODULE HK381A 1 IR1001
14-LED05R-XX1 LED RED FB205 1 D1001
18-CB0470-JNX RES. C.F. 47 OHM 1/6W +/-5% 1 R1002
18-CB0471-JNX RES. C.F. 470 OHM 1/6W +/-5% 1 R1003
25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C1001
40-T34276-SWB P.C.B. POWER SWITCH BD 1
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J1001
46-28559W-02X PIN BASE *2 TJC1-2A 1 S1002
46-28559W-02X PIN BASE *2 TJC1-2A 1 S1001 FOR POWER CORD
46-32269H-02X HS 2P22 200 TJC1-2Y/TJC1-2Y 1 FOR PWR SW. BD(S1002) & PWR PARTS
46-37030H-05X HS 5P 2468#24 450 TJC3-5Y/SCN 1 P1001 FOR M.BD P001
48-POW001-AX0 SWITCH POWER 1 SW1001
51-DC0220-0QB01 POWER CORD 1
62-262660-0HA POWER SW.ADAPTER HIPS-DOW 492J (HB) 1
62-310430-0HA LED HOLDER (COMMON) 1
08-2513SM-PWN 1
10-00EU1Z-FBX DIODE EU1Z (FAST RECOVERY) 1 D804
10-00EU1Z-FBX DIODE EU1Z (FAST RECOVERY) 1 D805
10-00EU1Z-FBX DIODE EU1Z (FAST RECOVERY) 1 D806
10-0EU2YX-FBX DIODE EU2YX (FAST RECOVERY) 1 D833
10-0EU2YX-FBX DIODE EU2YX (FAST RECOVERY) 1 D834
10-0FR104-FBX DIODE FR104 (FAST RECTIFIER) 1 D832
10-0RU3AM-F0X DIODE RU3AM (FAST RECOVERY) 1 D831
10-0RU4YX-F0X DIODE RU4YX (FAST RECOVERY) 1 D830
10-1N4004-EBX DIODE IN4004 (RECTIFIER) 1 D843
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D842
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D816
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D815
10-D3SB60-H7X DIODE D3SB60 (BRIDGE RECT.) 1 DB801
16
Loading...