TELEKABEL ESPECTA User Manual

USER MANUAL FOR CABLE RECEIVER

ESPECTA

SECURITY INSTRUCTIONS FOR USING THE RECEIVER

• Always fallow these instructions to avoid risk of injury or damaging the
equipment.

• Before cleaning unplug the receiver from the power grid.

• Use only dry cloth when cleaning the receiver.

• Do not connect devices that are not recommended from the manufacturer so
you don’t cause damage to the device and lose your warranty.

• Do not put the device on unstable surfaces and furniture.

• Do not cover the receiver because it may disrupt the process of ventilation

and cooling and it could lead to its permanent damage.

• Never put the receiver near devices that generate heat.

• Do not put the receiver on places that there is not enough air flow.

• Do not put the receiver on top or under electronic devices.

• Do not put object on the receiver that contains water.

• Plug the receiver only on the recommended power grid that is specified in the

user manual.

• Secure the power cable so it is not pressed by any other devices.

• Use power plugs that are secured with fuses and are properly grounded.

• In case of thunderstorm or if you do not plan to use the receiver for a longer

period of time, unplug it from the power grid, unplug the cable from the cable
TV, the cable from the antenna and from all the other devices.

• Do not try to repair the device yourself. You can get exposed to danger or
damage the device.

• CI slot.

• Power supply.

• SCART connector for connecting TV.

• Video composite out.

• Audio out (right)

• Audio out (left).

• Digital audio out.

• Other CTV network out.

• In for CTV.

When connecting the receiver it is important to fallow this order:

• Connect the cable from the cable TV.

• Connect the receiver with the TV and the other CTV network in the apartment.

• At the end you plug it in an electric network of 200V AC.