Telefunken Digicadre 14001, 10201 User Manual

User
guide
Model 14001
INDEX
I. Contents of the box..………………………………..…....…….06
II. Description of the frame.............……………………….……...06
III. Description of the remote control………......………....….……10
IV. Installing the frame..…………………………………...……..…11
V. Starting up........…………………………………..……….……..12
1. Which images are read by the DIGICADRE................................12
2. Inserting a card…………........……………………………..….……12
3. Switching on…….........…………………………………..….………13
4. Choosing the image source…….…………………….….………...13
5. Selecting a fixed image………….....…………..…..…….….….….14
6. Selecting a slide show………………......…..…….……..…….…...15
Non binding document, subject to modification in the event of misprint(s) – MKG0207
3
Fig.8
INDEX
VI. Using the menu………………………………………………...16
1. Choosing the language………………………………..….………...16
2. Selecting the display type…………………….......………..……….17
3. Image dimension ……………………………….....………..……….18
4. Transitions between images…………………..........……..……….19
5. Display duration of the photos…..………..……….……….……….21
6. Slide show type…………………………………………..........…….22
7. Image operations..........……………………………….……........…24
a. Copying photos………………………………………………..………...…24
b. Deleting photos….............………………….…………………..….……..26
c. Rotating images…………........……………………………..……….……28
d. Zoom………………………….…………………………….……….……...30
Non binding document, subject to modification in the event of misprint(s) – MKG0207
4
INDEX
e. Selecting favourite images ………………..........…………………..…………………..…31
f. Reinitialising………………………………………..............………....……………….……33
g. Brightness adjustment..………………………………..…..........……..….……….………34
h. Contrast adjustment…………………………………..…………..........…………….…….35
i. Colour adjustment……………………………..……………..………….........…………….36
j. Hue adjustment……………………………..………………..……………..…...........…….37
VII. Connecting to a computer……...............…………………….…..…38
1. Transferring images from the computer to the Digicadre…..................40
2. Transferring images from the Digicadre to the computer…….……..….40
VIII. Removing the back cover and cleaning...........…..……...…….......41
IX. F.A.Q………….………………………….….......……………….…….42
X. Safety…………..........……………………………………….………..43
XI. Warranty…………….......……………………………………....…….45
XII. Technical properties…….....................……………………..….……48
Non binding document, subject to modification in the event of misprint(s) – MKG0207
5
Congratulations on your purchase of the TELEFUNKEN Digicadre 14.1”. Please read the instructions and advice contained in this manual carefully before using the digital photo frame. Important: keep the packaging and all objects contained therein. Also keep this user manual for your own reference when needed.
I. CONTENTS OF THE BOX
One digital photo frame
One black acrylic back cover
One mains voltage adaptor
One remote control
One user manual
One USB lead
One cleaning swab
II. DESCRIPTION OF THE FRAME
Your TELEFUNKEN Digicadre includes an acrylic back cover that can be removed, a mai
n
voltage adaptor, a remote control and an LCD screen equipped with 2 USB ports, and multiple card reader that is compatible with most memory cards available on the market.
Non binding document, subject to modification in the event of misprint(s) – MKG0207
6
.
Lecteur de
cartes
Emplacement 2 - Cartes CF
Emplacement 1- cartes SD,
mini SD
Emplacement 3 - cartes
Memory stick
Port USB HOST
Mini port USB
Prise pour alimentation
secteur
Non binding document, subject to modification in the event of misprint(s) – MKG0207
7
Card reader
USB HOST port
USB mini port
Memory stick card
- slot 3
SD cards, mini SD cards –
slot 1
CF cards – slot 2
Mains voltage socket
Non binding document, subject to modification in the event of misprint(s) – MKG0207
8
Back of the frame
Adjustable support
Non binding document, subject to modification in the event of misprint(s) – MKG0207
9
Frame’s buttons
Backward/Forward
buttons
On/off button
Confirmation button
Menu access
Exit button
III. Descrip tio n de la téléc ommande
Touche lecture
Arrêt du
Diaporama
Touche de validation
Touche Droite
Touche Bas
Lancement du
Diaporama
Touche Gauche
Touche Haut
Rotation
Sortie
Zoom
Touche d’accès au menu
Touche de mise en fonction
Non binding document, subject to modification in the event of misprint(s) – MKG0207
10
DESCRIPTION OF THE REMOTE CONTROL
Zoom
Exit
Play
Up
Left
Launch the Slide
Show
Stop the Slide Show
Menu access
On/off button
Confirmation button
Right
Down
11
Fig.1
IV. INSTALLING DIGICADRE
1. Inclining the frame
Your Digicadre’s inclination can be adjusted by bringing the adjustable support down. Choose the inclination that suits you best among the 4 different levels (fig. 1). by pressing and holding the button located on the support, and pulling the support down. Set the black mark (white circle in fig. 1) to be facing marks numbered 1 or 2. To set the frame in the vertical (portrait) position, unscrew the 4 thumb-wheels that are found at the base, and turn the support set one quarter of a revolution. Screw the thumb­wheels back on and set the support on the marks numbered 3 or 4.
2. Electrical connection
Plug the end of the mains adaptor into its socket and then connect the other end to the wall-socket.
Non binding document, subject to modification in the event of misprint(s) – MKG0207
V. STARTING UP
1. Which images can be read by DIGICADRE?
DIGICADRE reads JPEG images, i.e. images from digital cameras. If you use image editing software (Photoshop, Paint shop pro, etc.), make sure to save only as an entry-level JPEG and not as a progressive JPEG, or any other type of JPEG. If you want to view images in black and white on your DIGICADRE, make sure that they are in RGB format and not in grey-level format. If they are saved in grey-level format, you can display these as thumbnail images, but not in full-screen DIGICADRE’s screen resolution is 1280 x 800 pixels. You can read images with a
higher resolution but the display time may be slowed down.
2. Inserting a memory card
Insert the memory card containing images to be read into its intended slot. Slot 1: for SD, mini SD or MMC cards Slot 2: for Compact Flash or MD cards Slot 3: for Memory Stick, Memory Stick Pro, Memory Stick Duo or Memory Stick Pro Duo cards.
Non binding document, subject to modification in the event of misprint(s) – MKG0207
12
2
3
Fig.2
1
3. Switching on
The slide show begins after a few seconds
The slide-show begins after a few seconds
4. Choosing the image source
With the remote contro
l
When the frame is in slide-show mode and photos are being displayed, point the remote control (fig.3) at the frame and then press EXIT twice. The screen on the left appears (fig.4). Select the desired source (memory card or internal memory) with the left and right arrows of the remote control (fig 3), then press the remote control’s "ENTER" button to confirm your choice. Press “ENTER” again to launch the slide show that you have chosen.
Non binding document, subject to modification in the event of misprint(s) – MKG0207
Fig.4
Fig.3
13
With the remote contro
l
With the frame
With the frame
When the frame is in slide-show mode and photos are being displayed, press twice. The screen on the left appears (fig. 4). Select the desired slide-show (card or internal memory) with the buttons; then press twice (fig. 5)
5. Selecting a fixed image
With the remote contro
l
When the frame is in slide-show mode and photos are being displayed, point the remote control at the frame and then press EXIT once. The frame then displays the image’s thumbnails. Select the desired photo using the remote control’s arrow buttons (left, right, up and down), then press ENTER. The selected image is displayed and doesnot change. If you press ENTER once more, the slide show begins again.
Non binding document, subject to modification in the event of misprint(s) – MKG0207
Fig.4
Fig.5
14
With the frame
When the frame is in slide-show mode and photos are being displayed, press once: the images are displayed in thumbnail form. Select the desired photo using the
buttons, and then press ENTER. The selected image is displayed and does not
change. To return to the slide show, press and the slide show begins again.
6. Selecting a slide show
With the remote contro
l
When the frame is in thumbnail display mode, press the remote control’s “Slide show” button once.
With the frame
When the frame is in thumbnail display mode, press the button twice.
Non binding document, subject to modification in the event of misprint(s) – MKG0207
15
VI.
USING THE MENU
1. Choosing the language
The default language is French. To choose another one, the menu must first be accessed.
With the remote contro
l
When the frame is in slide show mode and photos are being displayed, press the EXIT button to leave the slide show, and then press SETUP to display the menu screen. On the thirteenth line, the language is displayed (fig. 6). If you would like to change it, use the remote control’s UP or DOWN buttons, until the language line is highlighted (in blue), then press ENTER. Every time this button is pressed, a different language is displayed. (French, Spanish, Portuguese, Dutch, English, Italian, German). Once the menu is displayed in the desired language, press EXIT followed by ENTER.
With the frame
When the frame is in slide show mode and photos are being displayed, press once. The menu screen is displayed.
Non binding document, subject to modification in the event of misprint(s) – MKG0207
Fig.6
16
Loading...
+ 34 hidden pages