Telefunken 1120 User Manual

Full Automatic Washing Machine
User's manual
Model:TTL-700
Please read this manual carefully before using. Retain it for future reference.
Contents
Names of the parts............................1
Safety precautions ............................2
Special function introduction ............ 4
Installation and adjustment ...............4
Install the water inlet hose.................6
Preparation before washing .............8
Put in the laundries ...........................9
Add the detergent ............................10
Close the top lid ...............................10
Use the operation buttons ................11
Washing finished ..............................15
Disposal after washing .....................16
Packing list Specification...............18
Trouble shooting Answer to
question......................................... 17
Before using
..
Accessories
Meaning and description of the symbols
Warning sign
Forbidding sign
Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents. Otherwise, it may cause damage of the machine or injure the personal safety of the user.
Contents marked with that symbol are actions forbidden to perform. Performing of those actions may result in damage of the machine or injure the personal safety of the user.
Lint filter (one)
Bottom plate (one)
Water inlet hose (one)
water inlet Hose jointer (one)
ST4X12-A
Tapping screws
(seven)
All the pictures in this manual are sketch-map. And because of the improvement of product, so the washing machine and accessories which
continual
you received cannot be match
accurately with the sketch map in this manual.
Adjustable foot
Back cover
Cabinet
Control panel film
Control panel
Filter cover
Power line
Pulsator
Inner tub
Detergent box
Top lid B
Water valve
Top lid A
Water absorption cushion
Lint filter(Installed by user)
Names of the parts
Before Using
Fixed foot(3)
The end connecting to the water inlet hose jointer
The end connecting to the washing machine
Jointer connecting the water inlet hose and the water faucet
Adjustable foot lable
1
Drain hose hook
(one)
In case the washing machine is installed on ground with carpet, be careful not to block the ventilation hole with carpet.
Do not put the machine at damp place like the bathroom. Never wash it with water. Do not put wet laundries on the control panel coating
.
Do not let the machine share one receptacle with other electrical appliances. If the plugging into the receptacle is loose, do not use the plug any more.
Do not wash waterproof laundry like the raincoat, bikecovers, etc. To avoid abnormal vibrations in spinning.
In normal usage of the washing machine, the power plug shall be ready to be pulled or plugged with hang. Be sure to pull the plug off and close the water faucet when occurring power failure, delivering the machine, setting the machine idle or cleaning the machine, Do not plug or pull the power plug with wet hand.
Do not use water with temperature higher than 50
Please plug the plug on special 220V AC receptacle. Be sure to use threephase power receptacle. Ensure the earthing prong of the power receptacle is earth­ed reliably.Use a leakage protector if possible.
50 C
Earth
Do not bend, stretch, twist, bind the power cord by force, or reform it. Do not press or clamp it with heavy items. If the power cord and power plug are bad, or the receptacle is loose, be sure to have it replaced by the technicians of our special shop or our agent,or the customer care department to avoid any risk.Keep the prong of the power plug clean.If dust is found on the power plug, please wipe it off with dry cloth.
soft items
The ventilation holes at the bottom
Before Using
Before Using
Before Using
Before Using
Safety precautions
12
Before Using
Before Using
Safety precautions
Do not decompose, repair or alter the machine by yourself.
Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine.
Do not wash laundries with volatile materials (such as thinner, petrol etc.)
The handicapped or children without care shall not use the machine.
Keep the machine away from direct sunlight and heat source like the heater.
Please keep the lint filter in good condition, and install it to proper position. If the lint filter is lost or damaged, please contact the local customer care department of our company.
Petrol
Thinner
Do not put hand into the rotating tub. It is dangerous even if the rotation speed is slow. Take special care of the children. Keep children away from the washing machine to avoid them climbing on.
To protect your laundries and washing machine, please take out all of the coins, buttons, sand, hairpin and other foreign materials before washing.
Please check if the water faucet is open, and if the connection of the water inlet pipe is proper. Hang up the drain pipe. It is suggested to use foamless washing powder.
Dismantle
Install
3
Before Using
Before Using
Special function introduction
Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine.
Installation and adjustment
Alarming function when open the cover:
During working except for water and drain, the machine will stop running and alarm if opens the cover.
Child safety lock program
1. Purpose Child safety lock program is an added function of the washing machine. The purpose is protecting children from potential dangerous, which due to children climb onto washing machine and open the top lid, results in falling into washing tub and drowned. The process of this program as follows: when the child safety lock program has been started up; then if the top lid is opened, the machine will alarm immediately. If it cannot be dealt with duly (the way of solving: release child safety lock program), the machine will drain if there has water in washing tub after 15 seconds. After 10 minutes, the power is off automatically. So this can reach the purpose of protect children without care from potential dangerous.
2. Start up child safety lock program The program is optional anytime after the machine has been started. Push and hold PROCEDURE SELECTION and RESERVATION buttons for more than 2 seconds at the same time. After 2 beep sounds, the child safety lock program works; all buttons are locked and cannot be selected.
3. Release child safety lock program Similarly, push and hold PROCEDURE SELECTION and RESERVATION buttons for more than 2 seconds at the same time. After a beep sound, the child safety lock program is released; all buttons are unlocked.
4. Notice items # Child safety lock program is an added function. Only when it has been started up, it can work. # It is necessary for selecting child safety lock program, which the top lid must be closed. # The top lid cannot be opened after this program has been selected. Once the top lid is opened, the machine will enter into alarming status. It is necessary to release child safety lock program. # The child safety lock program can be optional only when the machine has been started. # After the child safety lock program takes effect, all buttons are locked and cannot be selected. Only when the program has been released, the buttons can resume its function. # During start or release this program, the current wash program of washing machine shall not be affected except for the beep sound. # The power is off or pull power plug off, the child safety lock program is released automatically. The program cannot be remembered after the power fails.
Install bottom plateInstall lint filter
After you open the package, please lean the washing machine gently down on soft items ( like the towel cloth, blanket, etc. ). Install the bottom plate to the bottom of the machine with the seven screws by a cross screwdriver, then lift the machine up gently. See to the figure:
Install
Push lint filter downward to l .ocation for lint filter
14
Loading...
+ 14 hidden pages