Telect ELF-1008-1100, ELF-1008-1800, ELF-9704-1119, ELF-3004-1800, ELF-3206-1200 User Manual

ELF System

Copper / Fiber :: ELF Family

User Manual

Applys to : ELF-1008-1100 :: ELF-1008-1200 :: ELF-1008-1800 :: ELF-3006-1100 :: ELF-3006-1800

ELF-9704-1119 :: ELF-3004-1800 :: ELF-3206-1200 :: ELF-3206-1900 :: ELF-PC12-SC00 ELF-9716-1900 :: ELF-9716-1700 :: ELF-0005-0001 :: ELF-PC12-FC00 :: ELF-SP12-SCPT ELF-SP12-FCPT :: ELF-PC12-SA00 :: ELF-SP12-SAPT

1.509.926.6000 :: telect.com

ELF System

Copper / Fiber :: ELF Family

Table of Contents

Chapter 1: Descriptions ........................................................................................................1

1.1 ELF Copper/Fiber System ..............................................................................................1

1.2 ELF Modules ...................................................................................................................1

1.3 ELF Mounting Options .................................................................................................... 5

1.3.1 ELF Chassis (Model ELF-0000-2400).....................................................................5

1.3.2 Wall-Mount ELF Chassis Bracket (ELF-0000-0900) ...............................................7

1.3.3 ELF Wall Bracket (Model ELF-0000-0600) ...........................................................10

1.3.4 ELF Lockable Wall-Mount Enclosure (Model ELF-0000-0800) ............................. 11

1.4 System-Level Applications ............................................................................................ 13

1.5 Installation Considerations ............................................................................................13

1.5.1 Location and Space ..............................................................................................13

1.5.2 Tools and Equipment ............................................................................................. 13

1.5.3 Inspection .............................................................................................................. 14

1.5.4 Technical Support (USA) ....................................................................................... 14

1.6 Specications ................................................................................................................14

Chapter 2: ELF DS1 Modules ............................................................................................. 17

2.1 ELF 8-Termination DSX-1, Wire-Wrap I/O (Model ELF-1008-1100) ............................. 17

2.2 ELF 8-Termination DSX-1, BNC I/O (Model 1008-1200) .............................................. 19

2.3 ELF 8-Termination DSX-1, RJ48C I/O (Model ELF-1008-1800) ................................... 21

2.4 ELF 6-Termination DSX-1, Wire-Wrap I/O (Model ELF-3006-1100) ............................. 23

2.5 ELF 6-Termination DSX-1, RJ48C I/O (Model ELF-3006-1800) ................................... 24

2.6 ELF 4-Circuit DNI-1, Wire-Wrap I/O to RJ48C I/O (Model ELF-9704-1119) .................25

2.7 ELF 4-Circuit DNI-1, RJ48C I/O to RJ48C I/O (Model ELF-3004-1800) .......................27

Chapter 3: ELF DS3 Modules ............................................................................................. 29

3.1 ELF 2-Termination DSX-3, Rear BNC I/O (Model ELF-3206-1200) .............................29

3.2 ELF 1-Termination DSX-3, TFA BNC I/O (Model ELF-3206-1900) ............................... 31

Chapter 4: ELF Fiber Modules ............................................................................................33

4.1 ELF Fiber Patch Modules (Model Series ELF-PC12) ................................................... 33

4.2 ELF Fiber Splice/Patch Modules (Model Series ELF-SP12) ........................................34

Chapter 5: ELF Multi-Purpose Modules ..............................................................................37

5.1 ELF RJ45C to RJ45C Patch Module (Model ELF-9716-1900) ..................................... 38

5.2 ELF RJ45-IDC Patch Module (Model ELF-9716-1700) ................................................39

5.3 ELF 12 x 4 Alarm Pin Block Module (Model ELF-0005-0001) ......................................40

Chapter 6: Service .............................................................................................................. 41

6.1 Owner Maintenance ......................................................................................................41

6.2 Service .......................................................................................................................... 41

6.2.1 In-Warranty Service ..............................................................................................41

6.2.2 Out-Of-Warranty Service .......................................................................................41

6.3 Repacking For Shipment ..............................................................................................41

Chapter 7: Accessories ....................................................................................................... 42

1.509.926.6000 :: telect.com

ii

ELF System

Copper / Fiber :: ELF Family

List of Figures

Figure 1 - ELF Chassis Mounting Options ............................................................................ 6

Figure 2 - Installing ELF Chassis on a Rack .........................................................................7

Figure 3 - Grounding an ELF Chassis ..................................................................................7

Figure 4 - Bracket .................................................................................................................7

Figure 5 - Wall-Mount ELF Chassis Bracket Dimensions ..................................................... 8

Figure 6 - Wall-Mount ELF Chassis Bracket Installation.......................................................9

Figure 7 - ELF Wall Bracket Dimensions ............................................................................10

Figure 8 - Typical ELF Wall Bracket Installation .................................................................10

Figure 9 - ELF Lockable Wall-Mount Enclosure ................................................................. 11

Figure 10 - ELF Lockable Wall-Mount Dimensions.............................................................12

Figure 11 - Model ELF-1008-1100 Dimensions ..................................................................17

Figure 12 - Model ELF-1008-1100 Reference Schematic .................................................. 18

Figure 13 - Model 1008-1200 Dimensions ..........................................................................19

Figure 14 - Model 1008-1200 Reference Schematic .......................................................... 20

Figure 15 - Model ELF-1008-1800 Dimensions .................................................................. 21

Figure 16 - Model ELF-1008-1800 Reference Schematic ..................................................22

Figure 17 - Model ELF-3006-1100 Dimensions .................................................................. 23

Figure 18 - Model ELF-3006-1100 Reference Schematic .................................................. 23

Figure 19 - Model ELF-3006-1800 Dimensions .................................................................. 24

Figure 20 - Model ELF-3006-1800 Reference Schematic ..................................................24

Figure 21 - Model ELF-9704-1119 Dimensions ..................................................................25

Figure 22 - Model ELF-9704-1119 Reference Schematic ...................................................26

Figure 23 - Model ELF-3004-1800 Dimensions .................................................................. 27

Figure 24 - Model ELF-3004-1800 Reference Schematic ..................................................27

Figure 25 - Model ELF-3206-1200 Dimensions .................................................................. 29

Figure 26 - Model ELF-3206-1200 Reference Schematic ..................................................30

Figure 27 - Model ELF-3206-1900 Dimensions .................................................................. 31

Figure 28 - Model ELF-3206-1900 Reference Schematic ..................................................31

Figure 29 - ELF-PC12-SC00 ..............................................................................................33

Figure 30 - ELF Patch Module (Model ELF-PC12-SCxx, Typical Cabling .......................... 34

Figure 31 - Model Series ELF-SP12 Parts & Dimensions ..................................................34

Figure 32 - Splice Cassette ................................................................................................35

Figure 33 - Subunit Entrance Compartment ....................................................................... 35

Figure 34 - ELF Splice/Patch Module ................................................................................. 36

Figure 35 - Model ELF-9716-1900 Parts & Dimensions ..................................................... 38

Figure 36 - Model ELF-9716-1900 Schematic .................................................................... 38

Figure 37 - Model ELF-9716-1700 Parts & Dimensions ..................................................... 39

Figure 38 - Model ELF-9716-1700 Schematic .................................................................... 39

Figure 39 - Example of Model ELF-9716-1700 nished cable and wiring .......................... 40

Figure 40 - Model ELF-0005-0001 Parts & Dimensions ..................................................... 40

1.509.926.6000 :: telect.com

iii

ELF System

Copper / Fiber :: ELF Family

Chapter 1: Descriptions

1.1 ELF Copper/Fiber System

Telect’s ELF System is a small “edge” connection system for use in locations where equipment density — maximum density with simplied monitoring — is important. The ELF System is ideal for a 3G, 4G, LTE wireless network at

a base transceiver station (BTS), customer premises, controlled environment vault, co-location, or at any remote network terminal.

All ELF Systems consists of a chassis, wall brackets, or wall enclosures with DSX-1, DNI, DSX-3, Fiber, and/or Ethernet/Data modules:

• ELF Chassis t equipment cabinets, 19-in. or 23-in. EIA/WECO racks, or Telect’s Wall-Mount ELF Chassis

Bracket. Each 1RU (1RU = 1.75 in.) chassis handles up to three, rear- and/or front-access ELF modules.

DSX-1, DSX-3, ber, and other ELF modules can be mixed in the same chassis.

• Single-Module ELF Wall Brackets mount to the walls. Each bracket accommodates one total front-access

ELF module

• Single-Module ELF Wall enclosures include a lockable access door. The enclosure mounts to the wall and accommodates one rear- and/or front-access ELF module. Ideal for a Fiber ELF module.

All chassis, brackets, and enclosures include shield ground pins for ITU G.703 compliance. ELF modules are passive devices and do not require power. All chassis, enclosure, brackets, and modules are mainly black.

1.2 ELF Modules

The cover shows a composite of all ELF modules and mounting options.

The following identies all ELF DSX1, DSX3, ber, and signal-manager modules offered by Telect, along with section and page references. Mounting options (chassis and wall mount) are covered in this section.

1.509.926.6000 :: telect.com

1

ELF System

Copper / Fiber :: ELF Family

ELF Module Conguration ELF Model

Number

DSX-1

8-Termination REAR — Wire-Wrap I/O

FRONT — Wire-Wrap XC

• 3-Port Bantam Patch Jacks

REAR — BNC I/O FRONT — Wire-Wrap XC

• 3-Port Bantam Patch Jacks

REAR — RJ48C I/O FRONT — Wire-Wrap XC

• 3-Port Bantam Patch Jacks

6-Termination (See Note.)

TOTAL FRONT ACCESS —

• Wire-Wrap I/O

• Wire-Wrap XC

• 3-Port Bantam Patch Jacks

TOTAL FRONT ACCESS —

• RJ48C I/O

• RJ48C XC

• 3-Port Bantam

Patch Jacks

ELF-1008-1100 17

ELF-1008-1200 19

ELF-1008-1800 21

ELF-3006-1100 23

ELF-3006-1800 24

Page Illustration

DNI-1

NOTE: All DS1 and DS3 Total Front Access and 12x4 Alarm Pin Block ELF Modules t Telect’s ELF

Wall Bracket (ELF-000-0600).

1.509.926.6000 :: telect.com

2

ELF System

Copper / Fiber :: ELF Family

ELF Module Conguration ELF Model

Number

4-Circuit Interconnect

DSX-3

2-Termination 1-Termination (See Note.)

REAR —

• Wire-Wrap NE1 I/O FRONT —

• RJ48C NE2 I/O

• 3-Port Bantam

Patch Jacks for all NEs

TOTAL FRONT

ACCESS(See Note.) —

• RJ48C NE1 I/O

• RJ48C NE2 I/O

• 3-Port Bantam

Patch Jacks for all NEs

REAR —

• BNC I/O & XC FRONT —

• 6-Port Mini-WECO

Jacks

ELF-9704-1119 25

ELF-3004-1800 27

ELF-3206-1200 29

Page Illustration

TOTAL FRONT AC-

CESS —

• BNC I/O & XC

• 6-Port Mini-WECO

Jacks

Fiber

12-Termination Patch

NOTE: All DS1 and DS3 Total Front Access and 12x4 Alarm Pin Block ELF Modules t Telect’s ELF

Wall Bracket (ELF-000-0600).

REAR —

• Fiber Jumpers from

NEs

FRONT —

• Fiber Adapters

ELF-3206-1900 31

ELF-PC12-SC00 ELF-PC12-FC00

33

1.509.926.6000 :: telect.com

3

ELF System

Copper / Fiber :: ELF Family

ELF Module Conguration ELF Model

Number

12-Termination Splice/ Patch

12-Termination SC-APC Patch Module

12-Termination SC/APC Patch and Splice Module

REAR —

• Subunit Entrance FRONT —

• Fiber Adapters

REAR –

• Fiber Jumpers

from NEs FRONT –

• Fiber Adapters

REAR –

• Subunit Entrance

FRONT –

• Fiber Adapters

ELF-SP12-SCPT ELF-SP12-FCPT

ELF-PC12-SA00 33

ELF-SP12-SAPT 33

Page Illustration

34

General Purpose Signal Management

NOTE: All DS1 and DS3 Total Front Access and 12x4 Alarm Pin Block ELF Modules t Telect’s ELF

Wall Bracket (ELF-000-0600).

1.509.926.6000 :: telect.com

4

ELF System

Copper / Fiber :: ELF Family

ELF Module Conguration ELF Model

Number

16-Circuit Patch

12 x 4 Alarm Pin Block (See Note.)

REAR —

• 16, RJ45Cs FRONT —

• 16, RJ45Cs

REAR —

• 16 IDC

Punch-Down Blocks

FRONT —

• 16, RJ45s

Bulkhead-Style Pin Block

ELF-9716-1900 38

ELF-9716-1700 39

ELF-0005-0001 40

Page Illustration

REAR

FRONT

NOTE: All DS1 and DS3 Total Front Access and 12x4 Alarm Pin Block ELF Modules t Telect’s ELF

Wall Bracket (ELF-000-0600).

1.3 ELF Mounting Options

1.3.1 ELF Chassis (Model ELF-0000-2400)

• High-density 1RU chassis accommodates three ELF modules.

• Fully enclosed environment provides robust RF protection.

• Reversible mounting brackets available for 19-in. or 23-in. EIA/WECO racks. (Rack-mounting hardware included.) Chassis brackets also t Telect’s Wall-Mount ELF Chassis Bracket.

• Total termination capacity per chassis:

− 18 or 24 DSX-1

− 12 DNI

− 3 or 6 DSX-3

− 36 ber splices/patches

− 48 RJ45C-to-RJ45C patches

− 36 alarm interconnects

1.509.926.6000 :: telect.com

5

ELF System

Copper / Fiber :: ELF Family

1.73 (44.0)

FRONT VIEW

17.25 (438.2)

Note: Dimensions are in in. (mm)

Removable Cable Tie-Down Bar

Reversible Rack Brackets Fit 19-in. or 23-in., EIA- or WECO-Spaced Racks. Brackets can be Positioned for Panel Flush or 1-in. Extended Mounting.

3.5 (88.9)

REAR VIEW

5.00 (127.0)

#8-32 Ground Stud and KEPS Nut

Figure 1 - ELF Chassis Mounting Options

1.509.926.6000 :: telect.com

6

ELF System

Copper / Fiber :: ELF Family

The following illustrations show a typical installation.

Figure 2 - Installing ELF Chassis on a Rack

1.3.2 Wall-Mount ELF Chassis Bracket (ELF-0000-0900)

Telect’s Wall-Mount ELF Chassis Bracket is designed

to hold one ELF Chassis (ELF-0000-2400) against a wall or side of a cabinet. The chassis bracket allows an ELF chassis with either rear- and/or front-access modules to either extend from a wall or cabinet using

a minimum wall “footprint” or to hug the wall or cabinet with a minimum prole. Wall-mounting hardware is

not included.

Figure 3 - Grounding an ELF Chassis

Figure 4 - Bracket

1.509.926.6000 :: telect.com

7

ELF System

Copper / Fiber :: ELF Family

5.30 (134.6)

3.30

(83.8)

0.91 (23.0)

1.25 (31.8)

0.50 (12.7)

0.75 (19.0)

18.71 (475.2)

16.00 (406.4)

3.00 (76.2)

0.25 (6.35)

Outline of ELF Chassis

8.00 (203.2)

0.50 (12.7)

5.00 (127.0)

0.25 (6.35)

0.875 (22.2)

16.00 (406.4)

19.77 (502.2)

18.31 (465.1)

Figure 5 - Wall-Mount ELF Chassis Bracket Dimensions

Typical wall installations are shown in the following illustrations. Telect recommends that the tie bar on the rear of the ELF Chassis be removed when installing in the Wall-Mount ELF Chassis Bracket. Also, when installing rear access ELF modules, Telect recommends including a minimum 2-ft (600-mm) service loop for any cabling or

wiring intended for the rear of the ELF module(s). Don’t forget to install a ground wire on the ELF Chassis, as

shown on Page 7.

1.509.926.6000 :: telect.com

4.30 (109.2)

8.00 (203.2)

0.95 (24.1)

2.03 (51.5)

8

ELF System

Copper / Fiber :: ELF Family

Removing Tie Bar

Rear Tie Bar

Hugging a Wall

Extending from a Wall

Figure 6 - Wall-Mount ELF Chassis Bracket Installation

ELF Chassis GND Stud

1.509.926.6000 :: telect.com

9

ELF System

Copper / Fiber :: ELF Family

1.3.3 ELF Wall Bracket (Model ELF-0000-0600)

Wall-mount bracket for one, total front access ELF module (ELF-3006-1100, ELF-3006-1800, ELF-3004-1800, or ELF -0005-0001). Wall-mounting hardware is not included.

Note: Dimensions are in in. (mm)

2.25 (57.2)

4.00 (101.6)

4.50 (114.3)

6.00 (152.4)

4.50 (114.3)

1.78

(54.2)

1.00 (25.4)

Figure 7 - ELF Wall Bracket Dimensions

The following illustration shows a typical installation.

#4 Lockwasher #4 Lug for 16-14 AWG

Grounding Hardware Included

0.12 (3.0)

Figure 8 - Typical ELF Wall Bracket Installation

1.509.926.6000 :: telect.com

10

ELF System

Copper / Fiber :: ELF Family

1.3.4 ELF Lockable Wall-Mount Enclosure (Model ELF-0000-0800)

Wall-mount enclosure, designed initially for one ber

ELF module, accommodates any rear-and/or front-access ELF module. Model ELF-000-0800 includes a lockable access door, ideal for co-locations. Wall-mounting and grounding hardware are not included.

The following illustration shows a typical installation.

Ground Strap & Lock Washer

are not supplied

ELF Module (Typical)

Screws are supplied with ELF Module

Mounting screws are not supplied

Figure 9 - ELF Lockable Wall-Mount Enclosure

1.509.926.6000 :: telect.com

11

ELF System

Copper / Fiber :: ELF Family

135 (5.31)

Note: Dimensions are in mm (in.)

134

(5.28)

63.5

(2.50)

9.0 (0.35)

9.4 (0.37)

10 (0.39) Dia.

4.6 (.18)

7.6 (0.3) Dia.

76.2 (3.00)

4.6 (.18) Dia.

38.1 (1.5)

REAR VIEW

(ROTATED)

172.9 (6.81)

TOP VIEW

3.00

(0.12)

236.79 (9.32)

FRONT VIEW

Figure 10 - ELF Lockable Wall-Mount Dimensions

1.509.926.6000 :: telect.com

12

ELF System

Copper / Fiber :: ELF Family

1.4 System-Level Applications

• Fiber Optic Splice/Patch Modules: Manage modest ber count bundles being delivered to base stations in

high-capacity wireless networks.

• DSX-3 Modules: Deliver advanced services outward to the edge of the network, whether wireless or wireline.

• DSX-1 Modules: Gain industry-leading density and options for T1/E1 signal management at the network’s edge.

• RJ-TJ Patch Module: In remote HUTs, CEVs, and cabinets, takes T1/Ethernet equipment interface from

inaccessible rear connection to front of equipment rack.

• T1 Interconnect RJ45 Modules: Ideal for handoff applications in customer premise environments.

1.5 Installation Considerations

CAUTION

!

CAUTION! Only qualied technicians may install and maintain this product.

ALERT

!

ALERT! These instructions presume you have veried that the Telect equipment being installed is compatible with the rest of the system, including power, ground, circuit protection, signal characteristics, equipment from other vendors, and local codes or ordinances.

1.5.1 Location and Space

• The ELF Chassis mounts in a 19 in. or 23 in. equipment rack (EIA or WECO) or inside an equipment cabinet. On an EIA rack, it takes up one RU of space (1RU = 1.75 in.).

• The Wall-Mount ELF Chassis Bracket requires approximately 20 in. (503 mm) by slightly more than 2 in. (52 mm) if a minimum wall “footprint” is desired. If hugging the wall, reserve approximately 20 in. by 8.25 in. (210

mm) of space.

• The ELF Wall Bracket requires approximately 6 in. (155 mm) by approximately 2 in. (45 mm) or 4 in. (102 mm) of wall space, depending on mounting orientation.

• The ELF Wall-Mount Enclosure requires approximately 10 in. (255 mm) by approximately 7 in. (180 mm) of wall space.

1.5.2 Tools and Equipment

• common hand tools

• wire-wrap tools for pinelds

• a chassis ground wire—14 AWG minimum with ring terminal

Use listed components (UL-recognized, CSA, ETL, TUV agency) and crimping tools.

1.509.926.6000 :: telect.com

13

ELF System

Copper / Fiber :: ELF Family

1.5.3 Inspection

Compare the contents of the ELF shipping container(s) with the packing list. Call Telect if you are missing anything.

Telect is not liable for shipping damage.

If the shipping container is damaged, keep it for the carrier’s inspection. Notify the carrier and call

Telect at 1-509-926-6000.

Keep the container until you have checked equipment operation. If you experience any kind of

problem, call Telect’s Customer Service Department. Use the original, undamaged container if

you are instructed to return the ELF equipment to Telect.

1.5.4 Technical Support (USA)

Please read and understand all instructions before starting installation. If you have questions, contact Telect Technical Support at [email protected] or call 1.509.926.6000.

When you receive the equipment, carefully unpack it and compare it to the packaging list. Please report any defective or missing parts to Telect Quality at [email protected] or call 1.509.926.6000.

Telect is not liable for transit damaged. If the product is damaged, please report it to the carrier and contact Telect Quality.

1.6 Specications

Table 1 - DS1 Electrical

E1 Specication T1 Specication

Return Loss 12 dB 51 kHz to 102 kHz

18 dB 102 kHz to 2048 kHZ 14 dB 2048 kHz to 3073 kHz

Insertion Loss 0.5 dB at bit rate (2.048 Mbps) 0.5 dB at bit rate (1.544 Mbps)

Monitor Level –20 dB ± 1.5 dB at bit rate (2.048

Mbps)

Contact Resistance <0.01 Ohms

Characteristic Impedance 100/120 Ohms

Adjacent Channel Crosstalk -60 dB at bit rate (2.048 Mbps) -60 dB at bit rate (1.544 Mbps)

Interchannel Crosstalk -60 dB at bit rate (2.048 Mbps) -60 dB at bit rate (1.544 Mbps)

26 dB 772 kHz

–20 dB ± 1.5 dB at bit rate (1.544 Mbps)

1.509.926.6000 :: telect.com

14

ELF System

Copper / Fiber :: ELF Family

Table 2 - DS3 Electrical

Specication

Return Loss <-26 dB at DS3, STS-1, and E3 signal rates

Insertion Loss <1.00 dB at DS3 signal rates for modules with one monitor network

Monitor Level 21 dB ± 1.5 dB below signal level

Contact Resistance <0.01 Ohms

Characteristic Impedance 75 Ohms

Table 3 - Fiber Optics

Specication

Return Loss >55 dB

Insertion Loss <0.5 dB

Mode Single

Bandpass 1310/1550 ± 20 nm

1.509.926.6000 :: telect.com

15

ELF System

Copper / Fiber :: ELF Family

This page was intentionally left blank

1.509.926.6000 :: telect.com

16

ELF System

Copper / Fiber :: ELF Family

Chapter 2: ELF DS1 Modules

Telect offers ve DSX-1 and two DNI-1 ELF Modules:

• All three ELF DSX-1 8-Termination Modules feature network element RJ45, BNC, or wirewrap connections on the rear and Telect’s Bantam patch/monitor jacks and wire-wrap crossconnections on the front.

• Both ELF DSX-1 6-Termination Modules are total front access modules. Wire-wrap network element, wire-wrap

cross-connections, and Bantam patch/monitor jacks are all on the front.

• Both ELF DNI-1 4-Circuit Modules contain RJ48C termination on the front along with 4 sets of Bantam patch/monitor jacks for the NE interconnections. One DNI-1 module is total front access with all Bantam interconnections between RJ48C NE-1/NE-2 terminations; the other module interconnects four NE-2 RJ48C termination on the front with wire-wrapped NE-1 termination on the rear.

2.1 ELF 8-Termination DSX-1, Wire-Wrap I/O (Model ELF-1008-1100)

Eight-circuit network element I/O wire-wrap pineld on the rear and corresponding cross-connect pineld and Bantam-style patch and monitor jacks on the front. Both pinelds provide individual shield grounds for each set of

jacks. Screws for mounting module to an ELF chassis or lockable wall-mount enclosure are included.

Circuit Designation Label

DSX-1 Bantam Jacks

Jumper Tie-Down Bar

Cross-Connect Pins

8-Termination Module

1.63

(41.3)

0.78 (19.9)

5.50

(139.7)

0.55

(13.9)

Note: Dimensions are in in. (mm)

Top View

5.11 (129.7)

5.86 (148.8)

Network Element Pinfield

Figure 11 - Model ELF-1008-1100 Dimensions

1.509.926.6000 :: telect.com

17

ELF System

Copper / Fiber :: ELF Family

RESISTOR VALUE = 475 ohm

R2

MON

OUT

IN

X-CON

OUT

IN

S. GND.

R1

REFERENCE SCHEMATIC

(TYPICAL FOR ALL CIRCUITS)

T R T R

Figure 12 - Model ELF-1008-1100 Reference Schematic

T

OUT

R T

IN

R S. GND.

I/O

1.509.926.6000 :: telect.com

18

ELF System

Copper / Fiber :: ELF Family

2.2 ELF 8-Termination DSX-1, BNC I/O (Model ELF-1008-1200)

Eight-circuit network element BNCs on the rear and corresponding cross-connect pineld and Bantam-style patch and monitor jacks on the front. Pineld provides shield grounds for each circuit. Screws for mounting module to an

ELF chassis or lockable wall-mount enclosure are included.

Circuit Designation Label

DSX-1 Bantam Jacks

Jumper Tie-Down Bar

Cross-Connect Pins

8-Termination Module

1.63

(41.3)

0.45 (11.5)

5.50

(139.7)

0.55

(13.9)

Note: Dimensions are in in. (mm)

Top View

5.11 (129.7)

5.86 (148.8)

Network Element BNC Jack Field

Figure 13 - Model ELF-1008-1200 Dimensions

1.509.926.6000 :: telect.com

19

ELF System

Copper / Fiber :: ELF Family

R

MON

OUT

IN

R

RESISTOR VALUE = 475 ohm

REFERENCE SCHEMATIC

(TYPICAL FOR ALL CIRCUITS)

T

OUT

I/O

X-CON

OUT

IN

S. GND.

T R T R

75/120 OHM

Figure 14 - Model ELF-1008-1200 Reference Schematic

IN

1.509.926.6000 :: telect.com

20

ELF System

Copper / Fiber :: ELF Family

2.3 ELF 8-Termination DSX-1, RJ48C I/O (Model ELF-1008-1800)

Eight-circuit network element RJ48Cs on the rear and corresponding cross-connect pineld and Bantam-style patch and monitor jacks on the front. Pineld provides shield grounds for each circuit. Screws for mounting

module to an ELF chassis or lockable wall-mount enclosure are included.

Circuit Designation Label

DSX-1 Bantam Jacks

Jumper Tie-Down Bar

Cross-Connect Pins

8-Termination Module

1.63

(41.3)

0.09 (2.4)

5.50

(139.7)

0.55

(13.9)

Note: Dimensions are in in. (mm)

Top View

5.11 (129.7)

5.86 (148.9)

Network Element RJ48C Jack Field

Figure 15 - Model ELF-1008-1800 Dimensions

1.509.926.6000 :: telect.com

21

ELF System

Copper / Fiber :: ELF Family

R2

RESISTOR VALUE = 475 ohm

MON

OUT

X-CON

IN

OUT

IN

S. GND.

R1

REFERENCE SCHEMATIC

(TYPICAL FOR ALL CIRCUITS)

I/O

T R T R

OUT

S. GND.

Figure 16 - Model ELF-1008-1800 Reference Schematic

8 7 6

IN

5

T R

4 3

T

2 1

R

1.509.926.6000 :: telect.com

22

ELF System

Copper / Fiber :: ELF Family

2.4 ELF 6-Termination DSX-1, Wire-Wrap I/O (Model ELF-3006-1100)

Six-circuit NE I/O and cross-connect pinelds and Bantam-style patch and monitor jacks are all on the front. Both pinelds provide individual shield grounds for each set of jacks. Screws for mounting module to an ELF chassis,

wall-mount bracket, or lockable wall-mount enclosure are included.

6-Termination Module

Network Element Pinfield

DSX-1 Bantam Jacks

Cross-Connect Pinfield

MON

Jumper Tie-Down Bar

Note: Dimensions are in in. (mm)

Circuit Designation Label

1.63

(41.3)

4.25

(108.0)

0.55

(13.9)

Figure 17 - Model ELF-3006-1100 Dimensions

R2

R1

RESISTOR VALUE = 475 ohm

Top View

1

2

3 4

5

6

7

8

5.11 (129.7)

5.86 (148.8)

OUT

IN

T

OUT

R

X-CON

1.509.926.6000 :: telect.com

IN

S. GND.

T R

Figure 18 - Model ELF-3006-1100 Reference Schematic

23

REFERE NCE SCHEMATIC

(TYPICAL FOR ALL CIRCUITS)

T

OUT

R T R

S. GN D.

I/O

IN

ELF System

Copper / Fiber :: ELF Family

2.5 ELF 6-Termination DSX-1, RJ48C I/O (Model ELF-3006-1800)

Six-circuit network element and cross-connect RJ48Cs, along with Bantam-style patch and monitor jacks, are all on the front. Screws for mounting module to an ELF chassis, wall-mount bracket, or lockable wall-mount enclosure are included.

Note: Dimensions are in in. (mm)

6-Termination Module

DSX-1 Bantam Jacks

Jumper Tie-Down Bar

MON

OUT

IN

Circuit Designation Label

Cross-Connect RJ48C Jack Field

Network Element RJ48C Jack Field

1.63

(41.3)

4.25

(108.0)

0.55

(13.9)

Figure 19 - Model ELF-3006-1800 Dimensions

R2

R1

RE SISTOR VALUE = 475 ohm

REFERENCE SCHEMATIC

(TYPICAL FOR ALL CIRCUITS)

Top View

1

2

3 4

5

6

7

8

5.11 (129.7)

5.86 (148.8)

X-CON

OUT

R

1

T

2 3

IN

R

4

T

5 6 7 8

RJ SHIELD GND.

Figure 20 - Model ELF-3006-1800 Reference Schematic

1.509.926.6000 :: telect.com

CHAS SIS GND.

24

OUT

I/O

8 7 6

IN

5

T R

4 3

T

2

R 1

ELF System

Copper / Fiber :: ELF Family

2.6 ELF 4-Circuit DNI-1, Wire-Wrap I/O to RJ48C I/O (Model ELF-9704-1119)

This ELF DNI-1 4-Circuit Module contains 4, NE-1 wire-wrap termination on the rear. 4, NE-2 RJ48C termination are on the front along with 4 sets of Bantam-style patch and monitor jacks for interconnections and testing. Shields for all cable connectors are connected internally to chassis ground along with a shield ground pin for the wire-wrapped NE-1 cable. Screws for mounting module to an ELF chassis or lockable wall-mount enclosure are included.

DNI-1 Bantam Jacks

Interconnect Jumper Tie-Down Bar

NE-2 RJ48C Jack Field

NE-1 Interconnect Pinfield

4-Circuit Interconnect Module

Circuit Designation Label

1.63

(41.3)

0.78 (19.9)

5.50

(139.7)

0.55

(13.9)

Note: Dimensions are in in. (mm)

Top View

5.11 (129.7)

5.86 (148.8)

Figure 21 - Model ELF-9704-1119 Dimensions

1.509.926.6000 :: telect.com

25

ELF System

Copper / Fiber :: ELF Family

R2

NE-1

NE-2

MON

OUT

IN

MON

OUT

IN

R1

R2

R1

RESISTOR VALUE = 475 ohm

T R S. GND.

T

R

IN

NE-1

OUT

CHASSIS

GND.

NE-2

OUT

1

R

2

T

3

IN

4

R T

5 6 7 8

G

Figure 22 - Model ELF-9704-1119 Reference Schematic

1.509.926.6000 :: telect.com

26

ELF System

Copper / Fiber :: ELF Family

2.7 ELF 4-Circuit DNI-1, RJ48C I/O to RJ48C I/O (Model ELF-3004-1800)

The ELF DNI-1 4-Circuit Total Front Access Module contains 4, NE-1 and 4, NE-2 RJ48C terminations on the front along with 4 sets of Bantam-style patch and monitor jacks for interconnections and testing. Shields for all cable connectors are connected internally to chassis ground. Screws for mounting module to an ELF chassis, wall-mount bracket, or lockable wallmount enclosure are included.

Note: Dimensions are in in. (mm)

DNI-1 Bantam Jacks

Interconnect Jumper Tie-Down Bar

4-Circuit Interconnect Module

Circuit Designation Label

NE-2 RJ48C Jack Field

Figure 23 - Model ELF-3004-1800 Dimensions

R2

MON

OUT

IN

MON

R1

R2

R1

1.63

(41.3)

NE-1 RJ48C Jack Field

RE SIS TOR VALUE = 475 ohm

4.25

(108.0)

0.55

(13.9)

Top View

5.11 (129.7)

5.86 (148.8)

REFERENCE SCHEMATIC

(TYPICAL FOR ALL CIRCUITS)

8 7 6

IN

5

OUT

T R

4 3 2 1

RJ SHIELD

GND.

NE-1

OUT

IN

Figure 24 - Model ELF-3004-1800 Reference Schematic

1.509.926.6000 :: telect.com

27

OUT

CHASS IS

GND.

8 7 6

IN

5

T

4

R

3 2

T

1

R

NE-2

ELF System

Copper / Fiber :: ELF Family

This page intentionally left blank

1.509.926.6000 :: telect.com

28

ELF System

Copper / Fiber :: ELF Family

Chapter 3: ELF DS3 Modules

Telect offers two DSX-3 ELF Modules. Both feature 6-port mini-WECOs for temporary I/O and cross-connect patching, testing, and monitoring, along with BNC connectors for normal NE I/O and cross-connections:

• ELF 2-Termination DSX-3 (Model ELF-3206-1200) has the NE BNCs on the rear, and

• ELF 1-Termination DSX-3 (Model ELF-3206-1900) is total front access (TFA).

Both modules t the ELF chassis and Lockable Wall-Mount Enclosure. Mounting screws for

installing on the chassis or enclosure are included.

3.1 ELF 2-Termination DSX-3, Rear BNC I/O (Model ELF-3206-1200)

Mini-WECO Jacks

Jumper Tie-Down Bar

BNC Jacks

2-Termination Module

Circuit Designation Label

1.63

(41.3)

0.47 (11.9)

5.50

(139.7)

0.55

(13.9)

Note: Dimensions are in in. (mm)

Top View

1

2

3 4

5

6

7

8

5.11 (129.7)

5.86 (148.8)

Figure 25 - Model ELF-3206-1200 Dimensions

1.509.926.6000 :: telect.com

29

ELF System

Copper / Fiber :: ELF Family

MON

OX

O

IX

R1=75 OHM 1/4W

R2=768 OHM 1/4W

R 2

OX

R 1

O

I

R 1

I

IX

R 2

MON

FRONT

REAR

REFERENCE SCHEMATIC

Figure 26 - Model ELF-3206-1200 Reference Schematic

1.509.926.6000 :: telect.com

30

ELF System

Copper / Fiber :: ELF Family

3.2 ELF 1-Termination DSX-3, TFA BNC I/O (Model ELF-3206-1900)

Note: Dimensions are in in. (mm)

Top View

DSX-3 Mini-WECO Jacks

BNC Jacks

Jumper Tie-Down Bar

1-Termination Module

Circuit Designation Label

Figure 27 - Model ELF-3206-1900 Dimensions

MON

OX

O

I

IX

MON

R1

5.50

(139.7)

1.63

(41.3)

0.098 (2.5)

0.55

(13.9)

R2

5.11 (129.7)

5.86 (148.8)

R1=75 OHM 1/4W

R2=768 OHM 1/4W

R2

I

O

IX

OX

FRONT

REFE RENCE SCHEMATIC

Figure 28 - Model ELF-3206-1900 Reference Schematic

1.509.926.6000 :: telect.com

RE AR

31

ELF System

Copper / Fiber :: ELF Family

This page intentionally left blank.

1.509.926.6000 :: telect.com

32

ELF System

Copper / Fiber :: ELF Family

Chapter 4: ELF Fiber Modules

Telect manufactures two Fiber ELF platforms for patching, and patching with splicing:

• ELF Fiber Patch (Models ELF-PC12-SC00, ELF-PC12-FC00, ELF-PC12-SA00, and ELF-PC24-LC00)

• ELF Fiber Splice/Patch (Models ELF-SP12-SCPT, ELF-SP12-FCPT, and ELF-SP12-SAPT)

All modules are available with either 12, SC/UPC, FC/UPC, SC/APC, or 24 LC/APC adapters. All modules t the

ELF chassis and lockable wall-mount enclosure. Mounting screws for installing on the chassis or enclosure are

included. Telect supplies dust covers for all open ber adapters.

4.1 ELF Fiber Patch Modules (Model Series ELF-PC12-XX00)

The following illustration shows an ELF-PC12-SC00.

Fiber Patch Adapters

Clamshell Guide for Fiber Jumpers

12-Termination

ELF Fiber Patch Module

Circuit Designation Label

1.63 (41.3)

0.90 (22.9)

7.21

(183.1)

0.87

(22.0)

Note: Dimensions are in in. (mm)

Top View

5.24 (133.0)

5.90 (150.0)

You can purchase Fiber Patch Modules with factory-installed 2-mm ber jumpers, as shown below

1.509.926.6000 :: telect.com

Figure 29 - ELF-PC12-SC00

33

ELF System

Copper / Fiber :: ELF Family

Top Cover

Cable Clamp

Spool

Figure 30 - ELF Patch Module (Model ELF-PC12-SCxx, Typical Cabling

4.2 ELF Fiber Splice/Patch Modules (Model Series ELF-SP12-XXPT)

The following illustration shows an ELF-SP12-XXPT.

1.63 (41.3)

0.90 (22.9)

12-Termination

ELF Fiber Splice/Patch Module

Note: Dimensions are in in. (mm)

Fiber Patch Adapters

Gland-Style Compression Connector for 12-Strand IFC/OSP Subunit

Figure 31 - Model Series ELF-SP12-XXPT Parts & Dimensions

1.509.926.6000 :: telect.com

34

Circuit Designation Label

7.21

(183.1)

0.87

(22.0)

5.24 (133.0)

5.90 (148.8)

Top View

ELF System

Copper / Fiber :: ELF Family

The module consists of a splice cassette mounted atop a subunit entrance compartment. (See the following illustrations.) The splice cassette is covered by a transparent plastic cover.

Top Cover

Split Stud (2)

Designation Label

Adapters (12)

Splice Holders

Nylon Clips (6)

Splice Deck

Figure 32 - Splice Cassette

Compression Connector

Subunit Clamp

Outer Race for Subunit

Figure 33 - Subunit Entrance Compartment

1.509.926.6000 :: telect.com

Subunit Clamp (2)

Inner Race for Pigtails

Spool

35

ELF System

Copper / Fiber :: ELF Family

You can purchase Fiber Splice/Patch Modules with 12

factory-installed 900 μm pigtails for splicing to ber strands from an incoming IFC/OSP subunit.

The opposite ends of factory-installed pigtails are

terminated on the rear face of the ber adapter at

the front of the module.

The illustration on the right shows a nished installation with 12 ber strands (Model ELF-SP12-SCPT).

1

From Adapters

6

7

From Subunit

12

1

2

3 4

5 6

From Subunit

6

7

From Adapters

12

7

8

9

10 11 12

connec t i ng t he f ut ur e

Figure 34 - ELF Splice/Patch Module

(Model ELF-SP12-SCPT

Typical Cabling)

1.509.926.6000 :: telect.com

36

ELF System

Copper / Fiber :: ELF Family

Chapter 5: ELF Multi-Purpose Modules

Telect manufactures three multi-purpose signal manager modules for RJ45C and pin-block signals. All signal manager modules are straight feed-through:

• The ELF RJ45C to RJ45C Patch Module (Model ELF-9716-1900) contains 16 RJ45C connectors on the rear which interconnect with 16 RJ45C connectors on the front. The module ts the ELF chassis and lockable

wall-mount enclosure.

• The ELF RJ45 to IDC Patch Module (Model ELF-9716-1700) contains 16 RJ45 connectors on the front which interconnect to T568A-coded IDC punch-down blocks for 100-Ohm cable on the rear. The module ts the ELF

chassis and lockable wall-mount enclosure.

• The ELF 12 x 4 Alarm Pin Block Module (Model ELF-0005-0001) is a bulkhead pin block primarily intended for interconnecting alarm signals. ELF-0005-0001 ts the ELF chassis, the wall-mount bracket, and the lockable-

wall-mount enclosure.

Mounting screws for installing on the chassis, bracket, or enclosure are included.

1.509.926.6000 :: telect.com

37

ELF System

Copper / Fiber :: ELF Family

5.1 ELF RJ45C to RJ45C Patch Module (Model ELF-9716-1900)

Note: Dimensions are in in. (mm)

Tie-Down Bars

RJ45C Connectors

16-Termination

RJ45C to RJ45C Patch Module

1.63

(41.3)

5.50

(139.7)

1.62

(41.3)

0.55

(13.9)

Figure 35 - Model ELF-9716-1900 Parts & Dimensions

5.25 (133.4)

Top View

5.86 (148.9)

8 7 6 5 4 3 2 1

RJ SHIELD

GND

CHASSIS

8 7 6 5 4 3 2

1

Figure 36 - Model ELF-9716-1900 Schematic

FRONT

GND

REAR

1.509.926.6000 :: telect.com

38

ELF System

Copper / Fiber :: ELF Family

5.2 ELF RJ45-IDC Patch Module (Model ELF-9716-1700)

5.25 (133.4)

16-Termination

Note: Dimensions are in in. (mm)

RJ45-IDC Patch Module

Tie-Down Bar

Tie-Down Bars

Figure 37 - Model ELF-9716-1700 Parts & Dimensions

A schematic illustration is shown on the right and a

nished cable and wiring illustration is shown in the

following illustration.

Please see Telect Publication 129039 for detailed instructions on installation and wiring.

1.63 (41.3)

WH/BL BL

WH/GR

GR

WH/OR

OR WH/BR BR

5.50

(41.3)

0.55

(13.9)

1.62

9

5 4 3 6 1 2 7 8 5 4 3 6 1 2 7 8

1

IDCs

5

Pair 1

4 3

Pair 2

6 1

Pair 3

2 7

Pair 4

8

10

11

5

4

3

6

1

2

7

8

5

4

3

6

1

2

7

8

2

3

5.86 (148.9)

Top View

12

13

5

4

3

6

1

2

7

8

5

4

3

6

1

2

7

8

4

5

16

14

5

4

3

6

1

2

7

8

5

4

3

6

1

2

7

8

6

7

1

RJ45

8

1.509.926.6000 :: telect.com

1

Figure 38 - Model ELF-9716-1700 Schematic

39

ELF System

Copper / Fiber :: ELF Family

Figure 39 - Example of Model ELF-9716-1700 nished cable and wiring

5.3 ELF 12 x 4 Alarm Pin Block Module (Model ELF-0005-0001)

ELF 12 x 4 Alarm Pin Block

(Model ELF-0005-0001)

1.63 (41.3)

Alarm I/O Cross-Connects

Jumper Tie-Down Bar

Figure 40 - Model ELF-0005-0001 Parts & Dimensions

Alarm Interconnects

2.26

(57.4)

5.88

(149.4)

1.509.926.6000 :: telect.com

40

ELF System

Copper / Fiber :: ELF Family

Chapter 6: Service

CAUTION

!

CAUTION! Only qualied technicians may install and maintain this product.

6.1 Owner Maintenance

Telect’s ELF chassis, enclosures, and modules do not need preventive maintenance

6.2 Service

Contact Technical Support (USA): By e-mail: [email protected] By phone: 888-821-4856 or 509-921-6161

6.2.1 In-Warranty Service

Contact your Telect equipment distributor, or call a Telect Customer Service Representative: 1-509-926-6000

Telect will repair or replace defective products within the limits of the warranty. See “Repacking for Shipment” in

this section.

Call a Customer Service Representative for a Return Material Authorization (RMA) before returning any equipment.

6.2.2 Out-Of-Warranty Service

The procedure for out-of-warranty service is the same as for in-warranty service, except that Telect charges a processing fee, and you must submit a Purchase Order along with a Return Material Authorization (RMA) before returning equipment. Call a Customer Service Representative for help getting these forms.

The processing fee guarantees a repair estimate and is credited against actual material and labor costs.

6.3 Repacking For Shipment

1. Tag the equipment showing owner’s name, address, and telephone number, together with a detailed description of the problem.

2. Use the original shipping container if possible. If you do not have it, package the equipment in a way to prevent shipping damage. Include the RMA inside the container and legibly print the RMA number on the outside of the package, near the shipping address

3. Insure the package.

1.509.926.6000 :: telect.com

41

ELF System

Copper / Fiber :: ELF Family

Chapter 7: Accessories

Description Catalog No. Illustration

Blank Face Plate (Includes Mounting Screws)

Bantam

Bantam Patch Cord, Single Plug

ELF-0000-0001

040-1000-xxx where xxx is the length in ft.

XXX FEET

Bantam Patch Cord. Dual Plug 040-2000-xxx

where xxx is the length in ft.

Bantam Circuit Guards Circuit Guard, BLK Circuit Guard, RED

BNC

Single RG59 without messenger wire

Single 735A without messenger wire

BNC Insertion & Removal Tool 097197

101222-2 101222-3

043-0111-xxx where xxx is length in ft

043-0911-xxx where xxx is length in ft

XXX FEET

1.509.926.6000 :: telect.com

42

ELF System

Copper / Fiber :: ELF Family

Description Catalog No. Illustration

Mini-WECO

RG59 043-0122-xxx where

xxx is length in ft

735A 043-0922-xxx where

xxx is length in ft

Mini-WECO Looping Plug 301291

Mini-WECO Terminating Plug 100293

Mini-WECO Circuit Guard Plugs (Black or White)

RJ48C Jumpers

CAT 5ePatch Cords EPCE-CT5E-BLXX where

CAT 6 Patch Cords EPCE-CAT6-BLXX where

PLG-MW-BLK or PLG-MW-WHT

xx is length in ft

1.509.926.6000 :: telect.com

43

ELF System

Copper / Fiber :: ELF Family

Description Catalog No. Illustration

Fiber Jumpers

Single mode or

62.5/125 Multimode

2 mm Simplex SC or ST Connector on one end; SC or ST Connector on the other MegaWave or GigaWave

Any length up to

999.0 ft or 999 m.

Circuit Designations (Self-adhesive circuit designation labels are provided with modules. Order the labels list here as replacements.)

8 Terminations 123958

See telect.com to access

cable congurator

1

2

3

4

5

6

7

8

1 to 4 Terminations 129396

12 Fiber Terminations 127380

1

2

3 4

5 6

7 8

9

10 11 12

connec t i ng t he f ut ur e

1.509.926.6000 :: telect.com

44

ELF System

Copper / Fiber :: ELF Family

This page intentionally left blank.

1.509.926.6000 :: telect.com

45