Telecom FM GSMRoute Bri Unmanaged Programming Manual

TelecomFM GSMRoute Bri

Unmanaged Programming Guide

Version 5 – September 2007

GSMRoute Bri Unmanaged Programmer Guide

Document Control

Date Document

Version

April 2003 1 Release of document

July 2005 1 1. GSM call home added. 2. Dual MSN.

3. Independent routing on network 7
(for version 1.10 onwards)

Jan 2006 2 Notices added

April 2007 3 Remote Trace & Configuration over

GSM, Advanced Routing options, (for
versions 1.17 onwards)

August 2007 4 Remote firmware download over GSM

(version 2.0 onwards)

September 2007 5 Modified for new version of Unmanaged

Programmer

Notices:

TelecomFM shall accept no liability for any error or damages of any kind resulting from the use of
this document or the equipment it relates to.

The wording in this document may change from time to time. Please refer to the TelecomFM web
site www.telecomfm.co.uk

for the latest release.

Change

2

GSMRoute Bri Unmanaged Programmer Guide

1 Contents

Contents.................................................................................................................. 3

1

2 Hardware & Software Requirements........................................................................ 4

3 Installation of Programmer...................................................................................... 4

4 Starting the Programmer......................................................................................... 6

5 Getting Template..................................................................................................... 8

6 Edit Template .......................................................................................................... 9

6.1 Statistics Tab......................................................................................................10

6.2 Config Tab .........................................................................................................12

6.3 Management Tab ................................................................................................14

6.4 GSM-ISDN Routing Tab.. ... ............................... .. ... ............................... .. ..............15

6.5 Template Properties.............................................................................................17

7 Set Template ......................................................................................................... 18

8 Testing the unit ..................................................................................................... 18

9 Remote Trace and Configuration Over GSM............................................................ 19

10 Remote Firmware download Over GSM ............................................................... 22

3

GSMRoute Bri Unmanaged Programmer Guide

2 Hardware & Software Requirements

Windows NT, 2000, XP (Latest Service Packs where applicable).
PC Hardware as required for operating system.
9 pin RS232 COM Port
300MB Hard Drive Space

3 Installation of Programmer

From CD

1. From CD
Insert the CD – the CD will autorun and the menu is displayed (if the menu is not displayed
then double-click on “My Computer”, double-clic k on you r CD Drive letter and then double­click the “autorun.exe” file). Click on “Install Unmanaged Programmer” to start the
installation.

Or From Download

Browse to the folder that you downloaded the Unmanaged Programmer to and double- click
the “ump.exe” file to start the installation.

2. Click the “Setup” button:

3. Click “Next” on the Welcome Screen:

4

GSMRoute Bri Unmanaged Programmer Guide

4. Click “Next” to install to the Default location or click the Browse button to choose a different
location:

5. Click “Next” to begin the installation:

6. When the files have been copied click the “Finish” button to exit the installer:

5

GSMRoute Bri Unmanaged Programmer Guide

4 Starting the Programmer

1. Click on the Start Menu, Programs (or All Programs), TelecomFM, Unmanaged

Programmer

The following screen will be displayed:

2. Connect the mains power cable to the GSM Route Bri and wait for the GSM Route Bri to

initialise.

3. Connect the RS232 cable to the Right hand Bus Port connection on the GSM Route Bri

(See Fig 2 of the Installation & User Guide) and the other end into the serial port of the
Laptop or P.C.

6

GSMRoute Bri Unmanaged Programmer Guide

4. Click on the Communications menu and select the COM port that the GSMRoute is

connected to (if the PC has only 1 serial port it is normally COM1).Select prop e r t ies and
adjust the port settings as in the diagram below:

Bits per second: 9600
Data bits: 8
Parity: None
Stop bits: 2
Flow control: None

5. The Unmanaged Programmer software is now ready for use.

7

GSMRoute Bri Unmanaged Programmer Guide

5 Getting Template

Click on the “Get Template” button. The Programmer will now retrieve the Dialler Image from the
unit. The IDENTITY of the product should be displayed giving detail of the Product Type, Serial
Number, Firmware, Hardware.

The display will show Got template if successful.

8