Telecom FM CELLROUTE-GSM Installation & User Manual

www.discountcomms.co.uk

Installation & User Guide

CELLROUTE-GSM

Version .05 – Jan 2006

2

www.discountcomms.co.uk

CELL Route-GSM

Document Control

Date Doc

Version
Apr 2003 1 1st release of document CH/TB
June 2003 2 Asset protection added CH/TB

Dec 2003 3 Adjustable gain settings & line reversal CH/TB

Jan 2004 4 Selectable confidence tone & Power fail Voltage CH/TB

Jan 2006 5 Notices & WEEE Directive symbol added CH

Notices

Note: The cellRoute-GSM unit must be connected to the mains power and
allowed to charge for a minimum of 30 minutes before use .

Emergency Calls

This terminal operates using GSM signals, which cannot guarantee connection
in all conditions. Therefore, you should never rely solely
on the terminal equipment for essential communications such as medical or
emergency services.

If the mains plug is removed from the power socket the unit will switch to an
internal battery supply. As there will not be an Earth connection, the output
voltage to the telephone line will automatically be reduced. Thi s is to comply
with the European Low Voltage Directive. This may result in miss-operation
when using in some types of telephone. This condition also applies for mains
failure.

No responsibility is assumed by TFM for the use or rel iability of the CellRoute­GSM when used in a situation or with other equipment not supplied or
specified by TFM.

TelecomFM shall accept no liability for any error or damages of any kind
resulting from the use of this document or the equipment it relates to.

The wording in this document may change from time to time. Please refer to
the TelecomFM web site WWW.telecomfm.co.uk

Change Authority

for the lates t r e l e a s e .

6

3

CellRoute-GSM

Introduction

Thank you for the purchasing the Cell Route-GSM terminal.

The CellRoute-GSM incorporates:

• CellRoute-GSM terminal (1)

• Internal Antenna (2)

• RJ11 Telephone connector (3)

• RJ45 Data port (4)

• L.E.D Indicators (5)

• Power Connection (6)

• External Antenna Connection & Switch (7)

7

1

5

3

2

4