TeleAlarm MIYS35 User Manual

5 x 3V Battery CR2032

Accessories

Cleaning the transmitter
and the accessories

MIYS35 & MIYS35Q

Pendant Transmitters

Operating instructions

10 x Necklace-Set

flathead screwdriver

1 x Magnet for reset

Battery change

Only by authorized personnel!

SOAP

Not to be used: alcohol, alcohol or vinegar-based cleaning
agents, vinegar, cleaning agents for glass or plastics, disinfectants
(except Incidur®), methylated spirits, benzine, other aggressive
agents, body lotion, sun cream, hand and nail cream. Do not wash.

Models: MIYS35 & MIYS35Q Pendant Transmitters

FCC ID.: W9N-MIYS35

This equipment complies with Part 15 of the FCC rules.Any changes
or modifications not expressly approved by the manufacturer could
void the user'sauthorityto operate the equipment.

This device complies with Part 15 of the FCC rules subject to the
following two conditions:

1) This device may not cause harmful interference.

2) This device must accept all interference received,
including interference that may cause undesired operation.

Incidur

SB.033.FI.US
SB.037.FI.US Pendant

MIYS35 Pendant Transmitter without string
MIYS35Q Transmitter with reset possibility

970.053 V2 2009.05

Trigger an emergency call

Shortening the cord

Technical data

HxWxD:75mmx40mmx25mm
40 g

Alarm + Alarm

The MIYS35
Pendant Transmitter
must be assigned to

the receiver!

Safety notes

Repairs only by authorized service stations

1x 3VCR2032

0°C ~ +55°C

Frequency: 434.01 M zH

Radiated power: 20 µW

Minimum range in free field: 200 m

Changing the wearing method

Automatic radio link monitoring: daily check
and at every alarm