TEL TE308R, TE306R, TE304R, TE302R, TE301R Datasheet

...

TE300R THRU TE308R

GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER

VOLTAGE - 50 to 800 Volts CURRENT - 3.0 Amperes

FEATURES

l Plastic package has Underwriters Laboratory

Flammability Classification 94V-O Utilizing Flame Retardant Epoxy Molding Compound

l Glass passivated junction in a DO-201AD package l 3 ampere operation at TA=55 with no thermal runaway l Exceeds environmental standards of MIL-S-19500/228 l Fast switching for high efficiency

MECHANICAL DATA

Case: Molded plastic, DO-201AD Terminals: axial leads, solderable per MIL-STD-202, Method 208 Mounting Position: Any Weight: 0.04 ounce, 1.1 grams

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

DO-201AD

Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.

Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 V Maximum RMS Voltage 35 70 140 280 420 560 V Maximum DC Blocking Voltage 50 100 200 400 600 800 V Maximum Average Forward Rectified Current .375”,

9.5mm Lead Length at TA=55 Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load(JECEC method) Maximum Forward Voltage at 3.0A 1.3 V Maximum Reverse Current at Rated DC Ta=25 Blocking Voltage Ta=100

Typical Junction capacitance (Note 1) CJ 60 Typical Thermal Resistance (Note 2) RJA 22.0 /W Maximum Reverse Recovery Time(Note 3) 150 150 150 150 250 500 ns Operating and Storage Temperature Range TA -55 to +150

NOTES:

1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC

2. Thermal resistance from junction to ambient at 0.375"(9.5mm) lead length P.C.B. mounted

TE300R TE301R TE302R TE304R TE306R TE308R

3.0 A

125 A

5.0

300

UNITS

A



3. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A

RATING AND CHARACTERISTIC CURVES

TE300R THRU TE308R

Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM

Fig. 2- FORWARD CURRENT DERATING CURVE Fig. 3-PEAK FORWARD SURGE CURRENT

Fig. 4-TYPICAL JUNCTION CAPACITANCE Fig. 5-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTIC